Yamaha NS-45E Owner's Manual

The front cover is fixed to the cabinet at six points, and can be

removed if desired.To remove the cover, hold both sides and

slowly pull straight away from the speaker.To reattach, line up

the six pegs on the inside surface of the cover with the six cor-

responding holes on the speaker and push gently.

Note

When the cover is removed, take care not to touch the

speaker units with your hands or to exert excessive force

with tools.

Type

........................

2-way 3-speaker bass-reflex speaker system

Driver

........................................................

16 cm cone woofer x 2

3 cm dome tweeter

Input Terminal

..............................................................

Screw-type

Impedance

...........................................................................

6 ohm

Frequency Response

............................................

38 Hz – 30 kHz

Nominal Input Power

..............................................................

80W

Maximum Input Power

..........................................................

240W

Sensitivity (2.83V, 1m)

.........................................................

90 dB

Crossover Frequency

...........................................................

3 kHz

Dimensions (WxHxD)

...................................

233 x 880 x 275 mm

(9-3/16” x 34-5/8” x 10-13/16”)

Weight

.........................................................

11.6 kg (25 lbs. 8 oz.)

Accessories

...............................................

Speaker cord (4m) x 2

Stand x 8

Screw x 16

Leg x 8

* Specifications subject to change without notice due to product

improvements.

* Care should be taken not to exceed the input power values

noted above.

NS-45E

Thank you for selecting this Yamaha speaker system.

PRECAUTIONS

Read these precautions carefully before using your speakers.

●

Any time you notice distortion, reduce the volume of your

amplifier. Never allow your amplifier to be driven into “clip-

ping”. Otherwise the speakers may be damaged.

●

When using an amplifier with a rated output power higher

than the nominal input power of the speakers, care should be

taken never to exceed the speakers’ maximum input.

●

Do not attempt to clean the cabinets with chemical solvents

as this might damage the finish. Use a dry, soft cloth.

●

To prevent the cabinets from warping or discoloring, do not

place the speakers where they will be exposed to direct sun-

light or excessive humidity.

●

Do not place the speakers where they are liable to be

knocked over or struck by falling objects. Stable placement will

also ensure better sound performance.

●

Do not place the speakers on the same shelf or rack as the

turntable. The vibration of the speakers might cause the feed-

back.

●

Secure placement or installation is the owner’s responsi-

bility.

YAMAHA shall not be liable for any accident caused by

improper placement or installation of the speakers.

PRECAUTIONS WHEN POSITIONING THE SPEAKERS

The speaker is constructed with the majority of the weight locat-

ed in its upper portion, and is thus susceptible to falling over if

proper care is not taken to insure its stability. If the speaker falls

over, it may damage the speaker or be the cause of injury (or

even death) to persons and/or damage to personal property.

For safe and proper use of the speaker:

●

Position the speaker in a location that is solid, level, smooth,

and low (with respect to the floor).

●

Do not push or apply pressure to the side of the speaker

when moving, or lean objects against the side of the speaker.

●

Do not sit on or set objects on top of the speaker.

Vibrations or jolts associated with earthquakes and other phe-

nomena or activities may cause the speaker to fall over. For

safety reasons, using commercially available products that

increase stability in the speaker is recommended (metal fittings

or chains, etc.).

Use the stands included with the speakers to increase sta-

bility:

Be sure to use the stands regardless of where the speakers are

positioned. Attaching the stands included with the speakers rein-

forces the base of the speaker not to fall over.

Please be cautioned that even though the stands are connect-

ed, this does not guarantee that the speakers will not fall over.

SPEAKER SYSTEM

SPECIFICATIONS

REMOVING THE FRONT COVER

G

Yamaha NS-45E Owner's Manual

Yamaha NS-45E Manual

Yamaha NS-45E manual content summary: