Yamaha NS-IW470WH Owners Manual
Yamaha NS-IW470WH Manual
 |
View all Yamaha NS-IW470WH manuals
Add to My Manuals
Save this manual to your list of manuals |
Yamaha NS-IW470WH manual content summary:
- Yamaha NS-IW470WH | Owners Manual - Page 1
NS-IW470 HOME CINEMA IN-WALL SPEAKER CONTENTS CONSUMER PRECAUTIONS 2 UNPACKING ...3 TOOLS NEEDED 3 SPEAKER PLACEMENT 3 INSTALLATION 4 CONNECTIONS 6 PAINTING THE SPEAKER FRAME AND GRILL 7 ADJUSTING THE MID-HIGH LEVEL VOLUME CONTROL 7 SPECIFICATIONS 7 WARRANTY Back cover OWNER'S MANUAL - Yamaha NS-IW470WH | Owners Manual - Page 2
qualified audio/video installer. z YAMAHA recommends installing the speaker only in two-by-four wood frame or similar construction. The instructions provided in this owner's manual are intended specifically for this type of wall construction. z When installing your NS-IW470 in-wall speaker, be aware - Yamaha NS-IW470WH | Owners Manual - Page 3
-15/16" 10-19/32" NS-IW470 Speaker System x2 Speaker Grill x2 Paint Protective Cutout template x1 cover x2 Glue Strips x2 install the left and right speakers at equal distance from the listening position. Each speaker should be separated by a distance of 610 ft. And the center of the speaker - Yamaha NS-IW470WH | Owners Manual - Page 4
grill, please refer to page 7 "PAINTING THE SPEAKER FRAME AND GRILL" before proceeding. 1 Position the cutout template where you are installing the speaker. Make sure the template is level, then trace around the template with a pencil. 4 Cut the wall along the outline you traced. 2 Drill a pilot - Yamaha NS-IW470WH | Owners Manual - Page 5
and your receiver. Please refer to page 6, "CONNECTIONS" section for detailed instructions. 9 Attach the grill to the frame. Glue strips 7 Place the speaker into the wall. Note: For secure grill attachment, application of the supplied glue strips is recommended. Recommended Glue Strip Location - Yamaha NS-IW470WH | Owners Manual - Page 6
output terminals of the receiver. z Connect the (+) terminals on the receiver and speakers using the corresponding side of the cable. Connect the (-) terminals on both components using the other side of the cable. Receiver NS-IW470 Notes: z Make sure that the bare wires are not touching each - Yamaha NS-IW470WH | Owners Manual - Page 7
frame 1 Remove the speaker from the wall if it is already installed. Also, remove the grill from the baffle. 2 Mask the speaker components and the baffle clockwise to boost and counterclockwise to cut over a range of -6 dB to +3 dB. SPECIFICATIONS Speaker Frequency Range Mid-High Level Control - Yamaha NS-IW470WH | Owners Manual - Page 8
abuse, improper installation or operation or failure to follow instructions contained in your Owner's Manual. b. Any shipment of the product. (Claims must be presented to the carrier.) c. Repair or attempted repair by anyone other than YAMAHA or a specially authorized YAMAHA Service Center. (2) Any
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
NS-IW470
HOME CINEMA IN-WALL SPEAKER
CONTENTS
CONSUMER PRECAUTIONS
............................................................................
2
UNPACKING
.......................................................................................................
3
TOOLS NEEDED
................................................................................................
3
SPEAKER PLACEMENT
....................................................................................
3
INSTALLATION
..................................................................................................
4
CONNECTIONS
.................................................................................................
6
PAINTING THE SPEAKER FRAME AND GRILL
...............................................
7
ADJUSTING THE MID-HIGH LEVEL VOLUME CONTROL
...............................
7
SPECIFICATIONS
..............................................................................................
7
WARRANTY
.......................................................................................
Back cover
OWNER’S MANUAL