Yamaha P3500S Owner's Manual

Yamaha P3500S - Amplifier Manual

Yamaha P3500S manual content summary:

  • Yamaha P3500S | Owner's Manual - Page 1
    POWER AMPLIFIER Owner's Manual E
  • Yamaha P3500S | Owner's Manual - Page 2
    user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. 2 Keep these instructions Protect the power cord from to products distributed by Yamaha-Kemble Music (U.K.) Ltd.
  • Yamaha P3500S | Owner's Manual - Page 3
    power cord only to an AC outlet of the type stated in this Owner's Manual instructions on page 11. ● To relocate the unit, turn the power switch off, remove the power trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power
  • Yamaha P3500S | Owner's Manual - Page 4
    trademarks of their respective owners. FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority
  • Yamaha P3500S | Owner's Manual - Page 5
    the manual, please store it in a safe place. Contents Controls and Functions 6 Front Panel 6 Rear Panel 7 Speaker Connections 9 Speaker impedance 9 Wiring 10 Rack Mounting 11 Specifications 12 General Specifications 12 Block Diagram 13 Dimensions 14 Current Draw 14 Troubleshooting 15
  • Yamaha P3500S | Owner's Manual - Page 6
    . Also lights up for about three seconds at time of power-on, as the amp gets ready to operate. To provide protection, the unit will problem is corrected, the indicator goes off and normal operation resumes. 4 CLIP indicator Lights up red when the output signal distortion on the corresponding channel
  • Yamaha P3500S | Owner's Manual - Page 7
    : This feature provides improved frequency reponse on speakers such as the YAMAHA S112 and S115. 3 INPUT jacks (Channels A, B) Two jack types are provided for each channel. Note that if you are using BRIDGE or PARALLEL mode, only the Channel A jacks are effective. • XLR-3-31 jack The XLR-3-31 input
  • Yamaha P3500S | Owner's Manual - Page 8
    Channel A input goes to the Channel A output jacks, and the Channel B input goes to the Channel B output jacks. • PARALLEL mode The Channel A input signal is output through both the Channel A and Channel B output jacks. The Channel terminal. If you are having a problem with hum or noise, use this
  • Yamaha P3500S | Owner's Manual - Page 9
    Speaker Connections ■ Speaker impedance Speakers can be connected to the amplifier as shown below. Note that speaker impedance will vary according to the connection method and the number of speakers. Please be sure that your speakers' impedance is not less than the relevant minimum value indicated
  • Yamaha P3500S | Owner's Manual - Page 10
    size Note to users in the USA: Please use Class 3 wiring. (P7000S, P5000S) Please use Class 2 wiring. (P3500S, P2500S) Be sure CHANNEL A STEREO or PARALLEL BRIDGE 1+ A+ 1+ + 1- A- 1- 2+ B+ 2+ - 2- B- 2- Neutrik NL4FC plugs CHANNEL B 1+ B+ 1- B- Phone jack (1) Turn off the POWER
  • Yamaha P3500S | Owner's Manual - Page 11
    Rack Mounting Mounting in a standard EIA rack If you are mounting multiple power amplifiers in a rack, be sure to install ventilation panel(s) as shown below. Also be sure to use metal brackets (one on each side) to support the rear of each amplifer. Note: EIA stands for Electronic Industries
  • Yamaha P3500S | Owner's Manual - Page 12
    W 450 W 320 W Dimensions (W × H × D) 480 × 88 × 456 mm Weight 12 kg 12 kg 15 kg 14 kg Included Accessories Security cover (with a hex wrench), Owner's Manual 0 dBu=0.775 Vrms, Half Power=1/2 Power Output Level (Rated Power) Specifications and descriptions in this owner's manual are for
  • Yamaha P3500S | Owner's Manual - Page 13
    ■ Block Diagram P7000S, P5000S P3500S, P2500S CHANNEL A [BRIDGE] [PARALLEL] INPUT CHANNEL B BA HPF LPF CHANNEL A ATT State variable Active filter OFF Frequency [25 Hz-150 Hz] ON OFF YAMAHA SPEAKER PROCESSING INV YAMAHA SPEAKER PROCESSING Limiter Ach Power Amp CLIP Temperature Sensor (
  • Yamaha P3500S | Owner's Manual - Page 14
    ■ Dimensions ■ Current Draw P7000S standby idle 1/8 power 8Ω/ch 4Ω/ch 1/3 power 8Ω/ch 4Ω/ch P5000S standby idle 1/8 power 8Ω/ch 4Ω/ch 1/3 power 8Ω/ch 4Ω/ch P3500S standby idle 1/8 power 8Ω/ch 4Ω/ch 1/3 power 8Ω/ch 4Ω/ch Line Current (A) 100/120V 230/240V 0.08 0.04 1.0
  • Yamaha P3500S | Owner's Manual - Page 15
    to protect the power transistors. P3500S, P2500S Indicator(s) PROTECTION indicator lights. Possible Cause Remedy Protection Circuit A DC voltage of ±2 V or greater was generated in the power amplifier's output circuit. Consult your dealer or the nearest Yamaha service center. The relay
  • Yamaha P3500S | Owner's Manual - Page 16
    430-8650 Tel: +81-53-460-2441 Yamaha Pro Audio global web site http://www.yamahaproaudio.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2003 Yamaha Corporation WB09700 001CRZCx.x-xxE0 Printed in Indonesia
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

POWER AMPLIFIER
Owner’s Manual
E