Yamaha PSR-280 Owner's Manual - Page 74
Local Control, Press the [START/STOP] button.
View all Yamaha PSR-280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
MIDI Functions 4 Press the [START/STOP] button. Start the Initial Setup Send operation. 5 Start recording on the sequencer, then send the Initial Setup data. Start recording on the sequencer in the normal way, then - with as little delay as possible - press the [+] button to actually start transmitting the data. An "End" message briefly appears in the display when the operation is complete. End 6 Stop recording on the sequencer. Stop recording on the sequencer in the normal way. Make sure that any sub- sequently recorded performance data is recorded at least one measure fol- lowing the Initial Setup data. • When the Initial Setup Send operation is completed, the PSR280 automatically returns to the previous panel condition. Local Control This function lets you enable or disable keyboard control over the PSR-280's voices. This would come in handy, for example, when recording notes to MIDI sequencer. If you are using the sequencer to play back the voices of the PSR-280, you would want to set this to "off" - in order to avoid getting "double" notes, both from the keyboard and from the sequencer. Normally, when playing the PSR280 by itself, this should be set to "on." 1 Select the local control on. While holding the lowest D key and turnning on the power. • Select the local control off. Simply turning on the power again. 74