Yamaha PSR-510 Owner's Manual - Page 13

q Dual Mode In the dual mode both the [R1] and [R2] part voices are selected so they can be played simultaneously across the entire keyboard. To select the dual mode, make sure that both the [L1] and [L2] indicators are out, then press both the [R1] and [R2] buttons simultaneously (or hold one while pressing the other). You can switch back to either of the single modes from the dual mode simply by pressing the [R1] or [R2] button, as required. L1 R1 EDIT L2 R2 The R1 & R2 voices are played across the entire keyboard. q Split Modes The PSR-510 allows four different split modes, with one voice played on the left-hand section of the keyboard ([L1] or [L2]) and a different voice on the right-hand section of the keyboard ([R1] or [R2]). Selecting a split mode is simply a matter of pressing the buttons corresponding to the desired left- and right-hand parts. The split point (i.e. the key at which the voices change over) can be set at any desired key by using the SPLIT POINT CHANGE function described on page 19. L1 R1 EDIT L2 R2 w L1 voice. R1 voice. L1 R1 EDIT L2 R2 w L2 voice. R1 voice. L1 R1 EDIT L2 R2 w L1 voice. R2 voice. L1 R1 EDIT L2 R2 w L2 voice. R2 voice. q Split & Dual Modes There are five possible combinations of the split and dual modes, as shown below. The part for the single-voice side of the combination is selected simply by pressing the appropriate part button, while for the dual-voice side both buttons must be pressed simultaneously (or one while holding the other). L1 R1 EDIT L2 R2 w L1 voice. R1 & R2 voices. L1 R1 EDIT L2 R2 w L2 voice. R1 & R2 voices. L1 R1 EDIT L2 R2 w L1 & L2 voices. R2 voice. L1 R1 EDIT L2 R2 w L1 & L2 voices. R1 voice. L1 R1 EDIT L2 R2 w L1 & L2 voices. R1 & R2 voices. 11