Yamaha PSR-510 Owner's Manual - Page 31

q Starting the Accompaniment with an Introduction INTRO Any of the PSR-510 accompaniment patterns can be started with an appro- priate introduction by pressing the [INTRO] button and then the [START/ STOP] button. Once the [INTRO] button is pressed, the [INTRO] indicator will be lit INTRO MAIN continuously and the MAIN [A] or [B] indicator will flash to indicate which section will play when the introduction has finished. You can change the "des- A B tination" section by pressing the MAIN [A] or [B] button while its indicator is flashing. When the introduction ends, the [INTRO] indicator will go out and the [A] or [B] indicator will light continuously. NOTES • It is possible to start the accompaniment from any section - even the ending - by pressing the corresponding button prior to pressing the [START/STOP] button. The destination MAIN [A] or [B] section can be selected as described above. • The [INTRO] button can be used to select the introduction pattern even while the accompaniment is playing. • If you press the [SYNC-START/STOP] button and then the [INTRO] button, the accompaniment will start from the introduction as soon as a chord is detected in the Auto Accompaniment section of the keyboard. q The MAIN [A] and [B] Sections... MAIN A B Each accompaniment style has two main sections - [A] and [B]. If the MAIN [A] or [B] button is pressed while the accompaniment is playing, the corresponding section will begin from the top of the next measure. You can also select [A] or [B] before starting the accompaniment. NOTES • The MAIN [A] section is automatically selected whenever the power switch is turned on. q Adding Fill-ins ... FILL IN 1 FILL IN 2 The PSR-510 provide two types of fill-ins (rhythmic variations) - one which plays and then returns to the current MAIN section, and one which leads to the other MAIN section. Press the [FILL IN 1] button at any time while the accompaniment is playing to add a one-measure fill-in and or return to the current MAIN section, or press the [FILL IN 2] button to add a one-measure fillin and go to the other MAIN section. FILL IN 1 FILL IN 2 MAIN A B If the MAIN A section is playing, for example, the [A] indicator will flash while FILL IN 1 plays, and the [B] indicator will flash while FILL IN 2 plays. You can change the section that will begin playing after the fill-in by pressing the desired section button while the indicator is still flashing. NOTES • If you hold the [FILL IN 1] or [FILL IN 2] button, the fill-in pattern will repeat until the button is released, then the MAIN A or B section will play from the beginning of the next measure. • If the [FILL IN 1] or [FILL IN 2] button is pressed after the last beat of a measure, the fill-in will begin from the first beat of the next measure. If pressed at any other time the fill-in will begin immediately. • It is also possible to start the accompaniment with a fill-in by pressing the desired FILL IN button prior to pressing the [START/STOP] button. The destination MAIN [A] or [B] section can be selected in the normal way. 29