Yamaha PSR-510 Owner's Manual - Page 59

q Bulk Dump Reception ... The PSR-510 will automatically receive bulk dump data from another PSR-510 or MIDI data storage de- vice as long as the MIDI OUT terminal of the external device is properly connected to the MIDI IN connector of the PSR-510, and PSR-510 MIDI reception is enabled. When this occurs the [MIDI BULK DUMP/PAGE COPY] indicator will light and all panel controls will be disabled during reception. The progress of the bulk dump reception ([-A-]m[-S-]m[-n-]m[-r-]) will be indicated on the MULTI DISPLAY in the same as for bulk dump transmission. When all the data has been received, the [MIDI BULK DUMP/PAGE COPY] indicator will go out and all panel settings will corre- spond with the received bulk dump data (the received data is saved to the currently selected PAGE MEMORY). NOTES • If an error occurs during bulk dump reception, "Err" will appear on the MULTI DISPLAY and all data in the block in which the error occurred will be initialized (i.e. the corresponding settings will be reset to their power-on values). • When a bulk dump is received, the contents of the currently selected PAGE MEMORY are erased and replaced by the received data. • A bulk dump from an external device cannot be received during recording or Auto Accompaniment playback. • "-A-", "-S-", "-n-", or "-r-" will remain on the MULTI DISPLAY for a short time while after bulk dump reception has finished while the received data is being processed. s Page Copy The [MIDI BULK DUMP/PAGE COPY] button can also be used to copy the entire contents of one PAGE MEMORY number to any other, rather than transmitting the data via the MIDI OUT terminal. ZSelect the PAGE MEMORY Number You Want to Copy Select the PAGE MEMORY number you want to copy to a different number (page 54). XPress the [MIDI BULK DUMP/PAGE COPY] Button PAGE MEMORY Press the [MIDI BULK DUMP/PAGE COPY] button. The "ARE YOU PAGE # SURE?" indicator will flash and the PSR-510 will ask "Are you sure?". At the same time "1dP", "2dP", "3dP", or "4dP" will appear on the MULTI DISPLAY, depending on the selected PAGE MEMORY number. MIDI BULK DUMP/ PAGE COPY CSelect the Destination PAGE MEMORY Number Use the [+] and [-] buttons or the data dial to select the PAGE MEMORY number to which you want to copy the data. The source PAGE MEMORY number appears on the left digit of the MULTI DISPLAY while Source Destination number number the destination PAGE MEMORY number appears on the right digit. The Page Reset Function When "cL" appears to the right of the page number on the MULTI DIS- PLAY the page reset function is selected. If you press [YES] to execute the operation as described in the next step, all settings in the selected page will be reset to their initial values. VPress [YES] to Copy ... ARE YOU SURE ? YES NO Press the [YES] button to execute the page copy operation, or the [NO] button to cancel and return to the VOICE SELECT mode. When the data has been copied (this only takes about a second) the PSR510 will automatically return to the VOICE SELECT mode. 57