Yamaha PSR-510 Owner's Manual - Page 67

s Reset Procedures & Page Memory Default Settings All PSR-510 page memory settings are retained in memory even when the power switch is turned OFF as long as the PSR-510 is powered by batteries or an AC adapter. You can, however, restore the factory default settings for all four page memories or a single specified page memory by following the procedures outlined below. q System Reset ON/ OFF POWER RESET -+ ZPress the POWER switch to turn the PSR-510 power OFF. XTurn the power back ON while holding both the [+] and [-] buttons. "clr" will appear on the MULTI DISPLAY while the data is being reset. IMPORTANT • Executing the System Reset function will erase any existing settings all page memory locations! q Page Reset ZSelect the PAGE MEMORY Number You Want to Reset Select the PAGE MEMORY number you want to reset (page 54). XPress the [MIDI BULK DUMP/PAGE COPY] Button PAGE MEMORY PAGE # Press the [MIDI BULK DUMP/PAGE COPY] button. The "ARE YOU SURE?" indicator will flash and the PSR-510 will ask "Are you sure?". At the same time "1dP", "2dP", "3dP", or "4dP" will appear on the MULTI DISPLAY, depending on the selected PAGE MEMORY number. MIDI BULK DUMP/ PAGE COPY CSelect a "cL" Display ... RESET -+ Use the [+] and [-] buttons or the data dial to select "1cL", "2cL", "3cL", or "4cL" (the number corresponds to the selected page number). 0 VPress [YES] to Reset ... ARE YOU SURE ? YES NO Press the [YES] button to execute the page reset function, or the [NO] button to cancel and return to the PAGE MEMORY number selection mode (step 1, above). All settings in the selected page will be reset to their initial values. When the data has been reset the PSR-510 will automatically return to the VOICE SELECT mode. IMPORTANT • Executing the Page Reset function will erase any existing settings all selected page memory location! 65