Yamaha PSR-5700 Owner's Manual (getting Started) - Page 12

Playing the PSR-5700 I Before You Begin FUNCTION EXIT Before playing your PSR-5700 for the first time, it might be a good idea to reinitialize it to the original factory settings just in case these have been changed at some point before you receive the instrument. To do this, press the [FUNCTION] button a few times until "F6" appears on the LED display (this is the UTILITY mode). Now press the [t] button (HARMONY TYPE) to the right of the LCD panel a few times until the following display appears: A. B. C. MODE s < > TRANSPOSE/ TUNE t OCTAVE CHANGE HARMONY TYPE "RECALL INITIAL DATA 1 Data=AllData -Execute- - + - + "RECALL INITIAL DATA 1 Data=AllData Busy! - + FUNCTION EXIT Press both the right [-] and [+] buttons under "-Execute-" on the display simultaneously. "Busy!" will appear while the initialization is taking place, and "Completed" will appear when the initialization is complete. Finally, press the [EXIT] button to return to the normal play mode. Selecting & Playing Voices Z Turn Power On and Set Initial Volume MASTER RHYTHM MAX BASS VOLUME CHORD 2 CHORD 1 ORCH. 2 ORCH. 1 Press the [POWER] button to turn the power ON, and set all seven VOLUME controls about three-quarters of the way toward their MAX settings. You can set the [MASTER] VOLUME control for the most comfortable overall volume level after beginning to play. No sound will be produced if all volume controls other than the MASTER control are set to their minimum positions. DETAIL MIN 11