Yamaha PSR-5700 Owner's Manual (getting Started) - Page 38

I Pitch Bend/Glissando Wheel PITCH BEND/ GLISSANDO MODULATION/ EFFECT UP MAX DOWN MIN I Modulation/Effect Wheel PITCH BEND/ GLISSANDO MODULATION/ EFFECT UP MAX DOWN MIN I Reverb REVERB EFFECT I Effects REVERB EFFECT LEFT HOLD will not function during Multi Pad playback or Sequencer ACCOMP. track playback even if the LEFT HOLD indicator is lit. DETAIL The PITCH BEND/GLISSANDO wheel to the left of the keyboard lets you bend the pitch of notes or "glissando" notes played on the keyboard up or down. Normal pitch is restored when the PITCH BEND/GLISSANDO wheel is released. The maximum pitch bend/glissando range is preset for each voice, but can be set as required for custom voices by using the CUSTOM VOICE EDIT feature described on page 27 of the Advanced Features manual. Pitch bend can be applied o the ORCH. 1 voice only, the ORCH. 2 voice only, or both voices via the PITCH BEND ASSIGN function described on page 39 of HINT the Advanced Features manual. Also, pitch bend is applied to harmony notes on the basis of the ORCH. 1 settings. The pitch bend wheel may have no effect when applied to notes at the upper and lower extremes of the keyboard if a CUSTOM VOICE is used. Also, sudden DETAIL pitch changes may occur. Pitch bend can be applied to notes from C-1 to C7 (i.e. MIDI note numbers 12 through 108). Pitch can not be bent down below the lowest note or up above the DETAIL highest note in this range. The MODULATION/EFFECT wheel to the left of the keyboard lets you apply effects or amplitude/pitch modulation to notes played on the keyboard. Rolling the MODULATION/EFFECT wheel upward (away from you) increases the effect or modulation depth. Use the WHEEL SELECT function described on page 39 of the Advanced Features manual to select effect or modulation operation. The type of effect applied when effect operation is selected is determined by the EFFECT TYPE function described on page 36 of the Advanced Features manual. The modulation effect mode is preset for each voice, but can be set for custom voices by using the CUSTOM VOICE EDIT feature described on page 27 of the Advanced Features manual. Modulation is automatically applied to some voices, while to some it cannot be applied even if the modulation wheel is operated. DETAIL Press the [REVERB] button to apply the reverb effect specified by the REVERB TYPE function described on page 35 of the Advanced features manual to the ORCH. 1 and 2 voices as well as the chord and rhythm accompaniment sound. The [REVERB] button alternately turns the reverb effect on (indicator lit) or off (indicator out). Press the EFFECT button to apply the effect specified by the EFFECT TYPE function described on page 36 of the Advanced features manual to the ORCH. 1 and 2 voices as well as the chord accompaniment sound. The [EFFECT] button alternately turns the effect on (indicator lit) or off (indicator out). 37