Yamaha PSR-620 Owner's Manual - Page 101

MIDI Implementation Chart *1 PSR-620 ordinarily functions as 16 MIDI channel multi-timbral tone generator controlled by MIDI reception data. Panel voices and the other panel settings are not affected by the MIDI message, excepting the followings: MIDI Master Tuning System Exclusive Message for controlling Reverb, Chorus and Dsp The Remote Channel can be designated by the panel settings. The designated channel on the PSR-620 can be controlled by an external device and receive all the data excepting the following control change data: Data entry, MSB, LSB Portamento control Data increment Data decrement NRPN LSB, MSB RPN LSB, MSB *2 Bank Select MSB The bank select MSB is used for melody voice and rhythm voice switching. MSB 00H: Melody voice. MSB 7FH: Rhythm voice. Transmission: Transmitted when changing the voice, style and song. Reception: All channels except10 channel receive this message. ( 10 channel is fixed at rhythm voice.). But when 10 channel is set for the remote channel or receives XG System On message, 10 channel receives this message and the rhythm voice can change to the melody voice. Bank Select LSB This message is used to correspond to the panel voice numbers higher than 128. Bank Select LSB=00H: program change numbers 0~127 correspond to the panel voice numbers 1~128. Bank Select LSB=01H: program change numbers 0~12 correspond to the panel voice numbers 129~141. Transmission: Transmitted when changing the voice, style and song. Reception: This message can be received only at the channel designated as the remote channel or the panel voice. No voice change will occur when only a bank select is received. When a program change is received the latest bank select value is used. *4 NRPN transmission/reception The following parameters are supported. NRPN MSB LSB 01H 08H Data entry MSB LSB mmH - - 01H 09H mmH - - 01H 0AH mmH - - 01H 20H mmH - - 01H 21H mmH - - 01H 63H mmH - - 01H 64H mmH - - 01H 66H mmH - - 14H rrH mmH - rr: drum instrument note number 15H rrH mmH - rr: drum instrument note number 16H rrH mmH - rr: drum instrument note number 17H rrH mmH - rr: drum instrument note number 18H rrH mmH - rr: drum instrument note number 19H rrH mmH - rr: drum instrument note number 1AH rrH mmH - rr: drum instrument note number 1CH rrH mmH - rr: drum instrument note number 1DH rrH mmH - rr: drum instrument note number 1EH rrH mmH - rr: drum instrument note number 1FH rrH mmH - rr: drum instrument note number Parameter Name/Range Vibrato Rate mm : 00H - 40H - 7FH (-64 - 0 - +63) Vibrato Depth mm : 00H - 40H - 7FH (-64 - 0 - +63) Vibrato Delay mm : 00H - 40H - 7FH (-64 - 0 - +63) Filter Cutoff Freq. mm : 00H - 40H - 7FH (-64 - 0 - +63) Filter Resonance mm : 00H - 40H - 7FH (-64 - 0 - +63) EG Attack Time mm : 00H - 40H - 7FH (-64 - 0 - +63) EG Decay Time mm : 00H - 40H - 7FH (-64 - 0 - +63) EG Release TIme mm: 00H - 40H - 7FH (-64 - 0 - +63) Drum Filter Cutoff Freq. mm: 00H - 40H - 7FH (-64 - 0 - +63) Drum Filter Resonance mm: 00H - 40H - 7FH (-64 - 0 - +63) Drum EG Attack Rate mm: 00H - 40H - 7FH (-64 - 0 - +63) Drum EG Decay Rate mm: 00H - 40H - 7FH (-64 - 0 - +63) Drum Instrument Pitch Course mm: 00H - 40H - 7FH (-64 - 0 - +63) Drum Instrument Pitch Fine mm: 00H - 40H - 7FH (-64 - 0 - +63) Drum Instrument Level mm: 00H - 7FH (0 - 127) Drum Instrument Panpot mm: 00H - 40H - 7FH (L - Center - R) Drum Instrument Reverb Send Level mm: 00H - 7FH (0 - 127) Drum Instrument Chorus Send Level mm: 00H - 7FH (0 - 127) Drum Instrument DSP Send Level mm : 00H - 7FH (0 - 127) Default 40H 40H 40H 40H 40H 40H 40H 40H 40H 40H 40H 40H 40H 40H Depends on note Depends on note Depends on note Depends on note 7FH Data entry LSB is ignored. *5 RPN transmission/reception The following parameters are supported. RPN MSB LSB 00H 00H Data entry MSB LSB mmH - - 00H 01H mmH - - 00H 02H mmH - - 7FH 7FH - - - - Parameter Name/Range Pitch bend Sensitivity mm: 00H - 02H - 0CH (0 - 2 - 12) Fine Tuning mm: 00H - 40H - 7FH (-64 - 0 - +63) Course Tuning mm: 00H - 40H - 7FH (-64 - 0 - +63) RPN Null Clears current RPN and NRPN number settings. Default 02H 40H 40H - - Data entry LSB is ignored. *3 These Control Change messages are not transmitted by the PSR620 panel operation, but may be transmitted by the accompaniment style playing. *6 Not transmitted when Song and Accompaniment is playing. *7 Pitch Bend, modulation, expression, sustain, sostenuto and softpedal are returned to their defult values. Clears current RPN and NRPN number settings. Resets portament source note number. *8 129~141 voice numbers are selectable through an appropriate Bank Select setting (Refer to *2). *9 When the External Clock is turned ON by PSR-620 panel setting, Clock, Start/Stop message will be received. The start/stop of the song recording and playback will be controlled by the external device. The initial set up data is transmitted before the song playback, so that the start may be delayed. 99