Yamaha PSR-620 Owner's Manual - Page 21
D.Volume, D.Octave, D.RevLvl, D.ChoLvl, D.Pan
View all Yamaha PSR-620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Playing the PSR-620 Function Dual Voice D.Volume D.Octave D.RevLvl D.ChoLvl D.Pan Description The dual voice can be changed as required while the number and name of the current dual voice appear on the top line of the display. The PSR-620 has 143 dual voices (voice numbers 01...141 and 150...151). Voice numbers 150...151 exclusively can be used as the dual voice. Sets the volume of the dual voice so you can create the optimum blend with the main keyboard voice. The volume range is from "00" (no sound) to "127" (maximum dual voice volume). Shifts the pitch of the dual voice up or down one or two octaves. "-1" is down one octave, "-2" is down two octaves; "+1" and "+2" are up one and two octaves, respectively. The original octave of the dual voice is determined by the "Octave" function in the OVERALL function group - page 77. Sets the reverb send level for the dual voice. The reverb send level detrmines the amount of signal sent to the reverb effect. The range is "00"(no effect) to "127"(maximum effect). Sets the chorus send level for the dual voice. The chorus send level determines the amount of signal sent to the chorus effect. The range is "00"(no effect) to "127"(maximum effect). Positions the dual voice in the stereo sound field. The pan range is from "-7" to "+7". "-7" is full left and "+7" is full right. • If the Voice Set function is ON (page 79), the Dual Voice parameters will change automatically whenever a different voice is selected via the VOICE function. • Keyboard percussion voices cannot be used as the dual voice. • The selected Dual Voice parameter can be reset to its default value by simultaneously pressing the [-/NO] and [+/YES] buttons. • The octave of the main and dual voices can be changed via the "Octave" function in the OVERALL function group - page 77. • Negative "D.Octave" and "D.Pan" parameters can be entered by pressing the number buttons while holding the [-/NO] button. • Reverb and chorus return levels can be changed via "RevRtnLv" and "ChoRtnLv", respectively, in the DIGITAL EFFECT functionsee pages 25 and 27. 3 Exit ...Press the [VOICE] button or select a different function to exit from the DUAL VOICE function. 19