Yamaha PSR-620 Owner's Manual - Page 70

Using Floppy Disks 5 Press the [EXECUTE] Button Press the [EXECUTE] button. The "SELECT DESTINATION" indicator appears above the beat indicator in the display. VOICE STYLE SONG REGIST MEMORY MULTI PAD DUAL VOICE SPLIT VOICE HARM/ ECHO OVERALL DIGITAL EFFECT 801 Yamaha 6 Select a Destination File in the Disk Select the file number you want to save the data to via the [-/NO] and [+/YES] button, the number buttons or the data dial. 7 Execute the Save Operation Press the [EXECUTE] button again to execute the save operation. "Saving" will appear on the display while the data is being saved and the [EXECUTE] indicator will light. When the data has been saved, the [EXECUTE] indicator will go out. The save operation can be canceled by pressing the [QUIT] button while the [EXECUTE] indicator is flashing. 101 Saving JOB SELECT EXECUTE QUIT DISK • Never remove the disk or turn the power OFF while the "Saving" display is showing. • When a file is selected "********" will appear to the right of the file number in the display if the file contains no data. • If you select a file number that already contains data and execute the save operation, the PSR-620 will ask "Overwr ?" for confirmation. If you're sure to overwrite press the [+/YES] button. The original data will be erased and replaced by the new data! • If the disk becomes full when you try to save ,"DiskFull" will appear on the display and the save operation cannot be done. Either delete unwanted data from the disk to make more room, or use a different disk. • Duplicate file names of the same file type are not allowed. "SameName" will be briefly displayed and the file which name as same file type already exists on the disk will automatically be selected as the destination file. If you execute the save operation for the file, press the [EXECUTE] button (Press the [QUIT] button if you want to cancel). The PSR-620 will ask "Overwr ?" for confirmation. If you're sure you want to write of the existing data, press the [+/ YES] button. • If an error occurs while saving data to the disk, "WriteErr" will appear on the display. Try the operation again. If the error persists there could be something wrong with the floppy disk. Try a different disk. Loading From Disk 1 Select a Data Type ...Any of the four data types - style, song, registration memory and multi pad - can be selected. Press the [FUNCTION] button to the left of the display as many times as necessary until the arrowhead in the display appears next to "STYLE", "SONG", "REGIST MEMORY" or "MULTI PAD" in the function list to the left of the display. FUNCTION VOICE STYLE SONG REGIST MEMORY MULTI PAD DUAL VOICE SPLIT VOICE HARM/ ECHO OVERALL DIGITAL EFFECT 801 SSax 68