Yamaha PSR-620 Owner's Manual - Page 87

InitSnd?

Get Yamaha PSR-620 PDF manuals and user guides View all Yamaha PSR-620 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

Overall Functions s External Clock ...Reception of an external MIDI clock signal can be enabled or disabled as required. When disabled (OFF), all of the time-based functions (Auto Accompaniment, SONG recording and playback, etc.) are controlled by its own internal clock. When MIDI clock reception is enabled (ON), however, all timing is controlled by an external MIDI clock signal received via the MIDI IN terminal. The default setting is OFF. oFF ExtClock • If the External Clock function is turned ON but the external clock signal is interrupted for more than 400 milliseconds, the internal clock is re-selected automatically. • External Clock setting is retained in memory even when the power switch is turned OFF, as long as batteries are installed or an AC adaptor is connected. • When the External Clock is turned ON, the song recording/ playback will be controlled by the external device. s Initial Data Send ...Transmits all current panel settings to a MIDI data storage device before actually recording your performance. With the "InitSnd?" function selected, press the [+/YES] button to start transmission. When the data has been transmitted, "End" will appear momentarily on the display and return to the "InitSnd?". YES InitSnd? • The song data will not be played back correctly, if the panel settings for the song has not been recorded in advance. To record the panel settings to an external device, engage the external device in the record mode and execute the Initial Data Send operation. • The "InitSnd?" function can be quickly selected by pressing and holding the [SYNC-START/ STOP] button. 85

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
85
Overall Functions
ExtClock
oFF
InitSnd?
YES
■
Initial Data Send
...........................................................................................................................................
Transmits all current panel settings to a MIDI data storage device before
actually recording your performance. With the “InitSnd?” function selected,
press the
[+/YES]
button to start transmission. When the data has been
transmitted, “End” will appear momentarily on the display and return to the
“InitSnd?”.
■
External Clock
..................................................................................................................................................
Reception of an external MIDI clock signal can be enabled or disabled as
required. When disabled (OFF), all of the time-based functions (Auto Ac-
companiment, SONG recording and playback, etc.) are controlled by its
own internal clock. When MIDI clock reception is enabled (ON), however,
all timing is controlled by an external MIDI clock signal received via the
MIDI IN
terminal. The default setting is OFF.
•
If the External Clock function is
turned ON but the external clock
signal is interrupted for more than
400 milliseconds, the internal
clock is re-selected automatically.
•
External Clock setting is retained
in memory even when the power
switch is turned OFF, as long as
batteries are installed or an AC
adaptor is connected.
•
When the External Clock is
turned ON, the song recording/
playback will be controlled by the
external device.
•
The song data will not be played
back correctly, if the panel set-
tings for the song has not been
recorded in advance. To record
the panel settings to an external
device, engage the external
device in the record mode and
execute the Initial Data Send
operation.
•
The “InitSnd?” function can be
quickly selected by pressing and
holding the [SYNC-START/
STOP] button.