Yamaha PSR-630 Owner's Manual - Page 89
Stop Recording, Record Additional Tracks as Required, Exit From the Record Mode, START/STOP], ENDING]
View all Yamaha PSR-630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQ,,QQSon,,QQgRec,,QQordin,,QQg ,,QQ • Before actually starting to record you can try playing the PSR-730/630 the way it is set up by using the "Rehearsal Mode": press the [SYNC START] button to temporarily disengage the record ready mode, rehearse as necessary, then press the [SYNC START] button again to return to the record ready mode. • Whenever you record using a SONG, any previously recorded material in the same track will be erased. • If the SONG memory becomes full while recording, "Disk FULL!!" will appear on the display and recording will stop (the "Rehearsal Mode" will be engaged). • Recording is carried out in 1-measure increments. If you stop recording in the middle of a measure, rests will automatically be recorded until the end of that measure. • If you start recording by pressing the [START/STOP] button, nothing will be recording on a MELODY track until you begin playing on the keyboard. Only rhythm accompaniment will be recorded on the ACCOMPANIMENT track until you play a chord in the auto accompaniment section of the keyboard. • During recording you can use the TRACK buttons to turn playback of previously-recorded MELODY tracks or the ACCOMPANIMENT track on or off as required. 6 Stop Recording Stop recording by pressing the [START/STOP] button. If you press the [ENDING] button while recording the ACCOMPANIMENT track, recording will stop automatically after the ending section has finished. When recording is stopped the MEASURE number on the display will return to "1" and the record-ready mode will be engaged. START / STOP ENDING 7 Record Additional Tracks as Required By repeating steps 4 through 6, above, you can select and record additional tracks as required. q Recording from the Middle of the Song It is possible to initiate recording from the middle of the song. If you want to change the latter half of the song (track), select the Measure number from which you want to record and start recording. When the AUTO ACCOMPANIMENT is on, this method is not available for the quick recording procedure. 8 Exit From the Record Mode When you're finished recording a song, press the [RECORD] button so that its indicator goes out, to exit from the record mode. The recorded user song can now be played back in the same way as the demonstration songs. RECORD • You can also press the [SYNC START] button to stop recording and return to the record ready mode. • While the record ready mode is engaged you can press the [VOICE] button to go to the VOICE menu and change the R1 voice as required. The R2 voice, however, cannot be changed (If the Voice Set function is on - page 116 - the R2 voice will automatically be changed when an R1 panel voice is selected). The record-ready mode must be disengaged in order to change the R2 voice and other settings. • You can rerecord a part of an already recorded track if desired, using the Punch In/Punch Out feature (page 92) • You can edit the data recorded in user songs (page 96). • You can edit the recorded accompaniment data recorded on accompaniment tracks (page 96). 87