Yamaha PSR-9000 Owner's Manual - Page 154
MFC10 Settings
View all Yamaha PSR-9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
MIDI Functions MFC10 Settings Various functions can be assigned to an optional Yamaha MFC10 MIDI Foot Controller connected to the PSR-9000. Connect the MFC10 to the MIDI B terminals and set the MIDI channel for the MFC10 messages by following the on-screen instructions. The PSR-9000 provides two ways to set: Easy Setup and Full Setup. MFC10 MIDI OUT MIDI cable MIDI IN MIDI IN MIDI OUT PSR-9000 • When the MIDI B terminals are connected to the MFC10, the functions of the MIDI B port are limited. For details, refer to the MIDI Data Format (page 192). MIDI B IN OUT The explanations here apply to step #5 of the Basic Procedure on page 150. s Easy Setup Follow the on-screen instructions to call up the template display as shown below. PAGE CONTROL BACK NEXT Select a template. Press the [NEXT] button to enable the selected Easy Setup template. Disconnect the MIDI cable from the MIDI OUT B terminal and connect it to the MFC10 Foot Controller. • When setting up the MFC10 from the PSR-9000, a MIDI cable must be connected from the MIDI OUT of the PSR-9000 to the MIDI IN of the MFC10. However, you should disconnect this cable when using the MFC10, since extraneous MIDI messages may be transmitted from the PSR-9000. • To exit from the MFC10 play mode, select the MIDI Template display (page 150) and press the [CANCEL] LCD button. • The MFC10 play mode on/off status is retained in Flash ROM and is maintained even when the power is turned off. 154 Reference q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q 152