Yamaha PSR-E433 Owner's Manual - Page 21

Quick Guide Creating Original Sounds via the Knobs The two knobs located in the lower left area of the panel can be used to add variations to the sound being played, transforming the sound in a variety of musical ways. Select the desired pre-programmed effect combination printed above the Knobs, then rotate the Knobs to enjoy the sound. Selecting a Knob Effect Combination Repeatedly press the [ASSIGN] button to sequentially select the five effect combinations provided: (1)  (2)  (3)  (4)  (5)  (1) ... etc. The current combination is shown in the display. GrandPno 001 001 Current value Applying the Filter to the Main Voice 1 Select the desired Main Voice. Here, select "164 SquareLd" (Square-wave Lead) as a synth-lead type Voice. 2 Press the [ASSIGN] button several times until (1) (Filter) appears in the display). 3 Rotate Knob B all the way to the right (maximum), then play the keyboard with your right hand while operating Knob A with your left. Filter Cutoff Filter Resonance (1)-(3) affect the Main and Dual Voices only, (4) affects only playback of Style and Pattern, and (5) affects the entire sound of this instrument. For details about each Knob effect, refer to page 37. Only selecting a Knob effect combination will not affect the sound even if the Knob arrow is not at the initial position. After operating the Knob, the selected effect is applied to the sound. NOTICE • Selecting a different Voice will replace the settings (except for ULTRA-WIDE STEREO; page 37) created via the Knobs with the default settings of the new Voice. If you create a sound with the Knobs that you wish to keep, make sure to memorize the settings to Registration Memory (page 31) before selecting a different Voice. NOTE • Rotating a Knob to the right while the volume is set to a high level may result in distortion. If this occurs, reduce the volume level. • The settings for the ULTRA-WIDE STEREO and the Pan via the Knob cannot be memorized to Registration Memory. PSR-E433 Owner's Manual 21