Yamaha PSR-E433 Owner's Manual - Page 39

Arpeggio Settings, Synchronizing an Arpeggio to Song/Style/Pattern Playback— Arpeggio Quantize,

Page 39 highlights

Arpeggio Settings Synchronizing an Arpeggio to Song/Style/Pattern Playback- Arpeggio Quantize When you play the keyboard to trigger an Arpeggio (page 20) along with Song/Style/Pattern playback, you'll need to play the notes with correct timing to keep the Arpeggio in synchronization with the other playback tracks. However, your actual timing may be slightly ahead of or behind the beat (or both). The "Arpeggio Quantize" function of this instrument will correct any slight imperfections in the timing (according to settings below), and then play back the Arpeggio appropriately. • Synchronizing at the quarter notes • Synchronizing at the 8th notes • No synchronization with Style or Song playback Although the Arpeggio Quantize value is pre-programmed for each Arpeggio Type, you can change the value manually. 1 Press the [FUNCTION] button. 2 Use the CATEGORY [+] and [-] buttons to call up "Quantize" (Function 042). After "Quantize" is shown for a few seconds, the current Arpeggio Quantize value is shown. Quantize 042 1/8 2 042 Current value 3 Rotate the dial to select a value from "OFF," "1/8" and "1/16." • 1/8 • 1/16 • OFF Synchronizing at the quarter notes Synchronizing at the 8th notes No synchronization with Style or Song playback Holding the Arpeggio Playback via the Footswitch You can set the instrument so that Arpeggio playback continues even after the note has been released, by pressing the footswitch connected to the SUSTAIN jack. 1 Press the [FUNCTION] button. 2 Use the CATEGORY [+] and [-] buttons to call up "Pdl Func" (Function 043). After "Pdl Func" is shown for a few seconds, the current setting is shown. Pdl Func 043 Sustain 1 043 Current setting 3 Rotate the dial to select "Arp Hold." Arp Hold 2 043 If you want to restore the footswitch function to sustain, select "Sustain." If you want to use both hold and sustain functions, select "Hold+Sus". 4 Try playing Arpeggio with the footswitch. Press the notes to trigger the Arpeggio, then press the footswitch. Even if you release the notes, Arpeggio playback will continue. To stop Arpeggio playback, release the footswitch. PSR-E433 Owner's Manual 39 Reference

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

PSR-E433
Owner’s Manual
39
Reference
Arpeggio Settings
Synchronizing an Arpeggio to
Song/Style/Pattern Playback—
Arpeggio Quantize
When you play the keyboard to trigger an Arpeggio
(page 20) along with Song/Style/Pattern playback,
you’ll need to play the notes with correct timing to
keep the Arpeggio in synchronization with the other
playback tracks. However, your actual timing may be
slightly ahead of or behind the beat (or both). The
“Arpeggio Quantize” function of this instrument will
correct any slight imperfections in the timing (accord-
ing to settings below), and then play back the Arpeg-
gio appropriately.
Synchronizing at the quarter notes
Synchronizing at the 8th notes
No synchronization with Style or Song playback
Although the Arpeggio Quantize value is pre-pro-
grammed for each Arpeggio Type, you can change the
value manually.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [+] and [-] buttons to
call up “Quantize” (Function 042).
After “Quantize” is shown for a few seconds, the
current Arpeggio Quantize value is shown.
3
Rotate the dial to select a value from
“OFF,” “1/8” and “1/16.”
1/8
Synchronizing at the quarter notes
1/16
Synchronizing at the 8th notes
OFF
No synchronization with Style or Song
playback
Holding the Arpeggio Playback
via the Footswitch
You can set the instrument so that Arpeggio playback
continues even after the note has been released, by
pressing the footswitch connected to the SUSTAIN
jack.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [+] and [-] buttons to
call up “Pdl Func” (Function 043).
After “Pdl Func” is shown for a few seconds, the
current setting is shown.
3
Rotate the dial to select “Arp Hold.”
If you want to restore the footswitch function to
sustain, select “Sustain.” If you want to use both
hold and sustain functions, select “Hold+Sus”.
4
Try playing Arpeggio with the foot-
switch.
Press the notes to trigger the Arpeggio, then press
the footswitch. Even if you release the notes,
Arpeggio playback will continue. To stop Arpeg-
gio playback, release the footswitch.
Quantize
042
1/8
2
042
Current value
Pdl Func
043
Sustain
1
043
Current setting
Arp Hold
2
043