Yamaha PSR-GX76 Owner's Manual - Page 73
Using Initial Setup Send with a Sequencer, GrandPno, BULKDUMP, INIT SND
View all Yamaha PSR-GX76 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
MIDI Functions The display returns to the currently selected voice. 001 GrandPno • If, for some reason, some problem occurred in the data reception, a "RcvError" message is shown in the display. Check all connections and settings and try the operation again. Using Initial Setup Send with a Sequencer The most common use for the Initial Setup Send function is in recording a song on a sequencer that is intended for playback with the PSR-GX76. Essentially, this takes a "snapshot" of the PSR-GX76 settings and sends that data to the sequencer. By recording this "snapshot" at the start of the song (before any actual performance data), you can instantly restore the necessary settings on the PSR-GX76. Provided there is a pause in the song, you could also do this in the middle of a song - for example, completely changing the PSR-GX76 settings for the next section of the song. s Sending Initial Setup Data 1 First, set up the sequencer for recording. The actual procedure may differ depending on your particular equipment and software. Ideally, you should leave two or more measures of silence (no performance data) before the song begins. The Initial Setup data should then be recorded to this space in the song. 2 Select the MIDI operations. Press the right Overall button, repeatedly if necessary, until MIDI is selected. 1 BULKDUMP Indicates MIDI is selected 3 Select the Initial Setup Send operation. Press "2" on the numeric keypad or use the [+]/[-] buttons to select operation #2, Initial Setup Send. 2 INIT SND 73