Yamaha PSR-S650 Owner's Manual - Page 59
Loading a File - expansion
View all Yamaha PSR-S650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
9. Using USB Flash Memory Loading a File Registration files (extension: usr), Style files (extension: sty), Song files (extension: mid) and MDB files (extension: MFD) saved to the USER FILE folder in the USB flash memory can be loaded to the instrument individually. NOTICE • If the same file name already exists in the instrument, it will be overwritten and erased. Especially, loading the Registration file will erase all the existing 64 setups. Keep this in mind when loading a file. 1 Make sure that a formatted USB flash memory has been connected to the USB TO DEVICE terminal, then call up the FILE CONTROL display (page 55). 2 Use the CATEGORY [] buttons to select "Load." 6 When the operation is complete, a "Completed" message appears briefly, then returns to the display of step 2. Press the [EXIT] button to exit from the FILE CONTROL display. 7 Check that the file is properly loaded. • When a Registration file is loaded, press one of the Registration Memory buttons to call up the panel settings. • When a Music Database file is loaded, press the [MDB] button then confirm that the loaded file name is added on the display. • When a Song file is loaded, press the [USER] button then confirm that the loaded file name is added on the display. • When a Style file is loaded, press the [EXPANSION/USER] button in the STYLE section then confirm the loaded file name is added on the display. NOTE • When loading a Song or Style, you should set whether the DSP Effect is used for the keyboard performance, or for Song/Style playback. This is because the DSP Effect can be used only for either part. Set the "TG Mode" parameter on the Function display. Currently selected file 3 Use the dial to select the file (Registration, Style, Song or MDB) you want to load. 4 Press the [EXECUTE] button. The display prompts you for confirmation. You can cancel the load operation at this message by pressing the [-/NO] button. 5 Press the [EXECUTE] button again, or the [+/YES] button to execute the load operation. NOTICE • Once the load-in-progress message appears in the display, the operation cannot be canceled. Never turn off the power or remove the USB flash memory during this operation. Doing so may corrupt the data on the device. Owner's Manual 59