Yamaha PSR-S910 Reference Manual - Page 14
Disabling Automatic Selection of Voice Sets Effects, etc., Call up the operation display., Use the [4 - sequencer
View all Yamaha PSR-S910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2 DSP [1 ▲▼]- [4 ▲▼] DSP TYPE Selects the DSP effect category and type. Select a type after selecting a category. [5 ▲▼]- [8 ▲▼] VARIATION Two variations are provided for each DSP type. Here, you can edit the VARIATION on/off status and variation's parameter value setting. [5 ▲▼] ON/OFF Turns the DSP Variation on or off for the selected Voice. This setting can also be made from the VOICE CONTROL [DSP VARI.] button on the panel. (This button is effective only when the [DSP] button is on.) PARAMETER Displays the variation parameter. (This differs depending on the effect type and cannot be changed.) 1 [6 ▲▼] VALUE Adjusts the value of the DSP variation parameter. -[8 ▲▼] 3 EQ Determines the Frequency and Gain of the Low and High EQ bands. For information about EQ, refer to page 78. ■ HARMONY Page Same as in the [FUNCTION] → [H] HARMONY/ECHO display. See "Selecting the Harmony/Echo type" on page 6. Voices - Playing the Keyboard - Disabling Automatic Selection of Voice Sets (Effects, etc.) Each Voice is linked to its default VOICE SET parameter settings. Usually these settings are automatically called up when a Voice is selected. However, you can also disable this feature by the operation in the relevant display as explained below. For example, if you want to change the Voice yet keep the same Harmony effect, set the HARMONY/ECHO parameter to OFF (in the display explained below). 1 Call up the operation display. [FUNCTION] → [E] REGIST SEQUENCE/FREEZE/VOICE SET → TAB [E][F] VOICE SET 2 Use the [A]/[B] buttons to select a keyboard part. 2 3 3 Use the [4 ▲▼]-[7 ▲▼] buttons to enable/disable automatic calling up of the settings (ON or OFF) independently for each parameter group. 14 PSR-S910/S710 Reference Manual