Yamaha PSR-S910 Reference Manual - Page 96
MIDI Transmit Settings, UPPER, LOWER, NOTE Note events, CC Control Change, PC Program Change
View all Yamaha PSR-S910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
MIDI Transmit Settings The explanations here apply to the TRANSMIT Page in step 4 on page 93. This determines which parts will be sent as MIDI data and over which MIDI channel the data will be sent. 1 The dots corresponding to each channel (1-16) flash briefly whenever any data is transmitted on the channel(s). Connections - Using Your Instrument with Other Devices - 10 12 3 1 Use the [A]/[B] buttons or [1 ▲▼]/[2 ▲▼] buttons to select the part for changing transmit settings. With the exception of the two parts below, the configuration of the parts is the same as those already explained elsewhere in the Owner's Manual. UPPER A keyboard part played on the right side of the keyboard from the Split Point for the Voices (RIGHT 1 and/or 2). LOWER A keyboard part played on the left side of the keyboard from the Split Point for the Voices. This is not affected by the on/off status of the [ACMP] button. 2 Use the [3 ▲▼] buttons to select a channel via which the selected part will be transmitted. NOTE If the same transmit channel is assigned to several different parts, the transmitted MIDI messages are merged to a single channel-resulting in unexpected sounds and possible glitches in the connected MIDI device. NOTE Protected Songs cannot be transmitted even if the proper Song channels 1-16 are set to be transmitted. 3 Use the [4 ▲▼]-[8 ▲▼] button to determine the types of data to be sent. The following MIDI messages can be set on the TRANSMIT/RECEIVE display. NOTE (Note events page 59 CC (Control Change page 59 PC (Program Change page 59 PB (Pitch Bend page 59 AT (Aftertouch page 59 96 PSR-S910/S710 Reference Manual