Yamaha QY700 Owner's Manual - Page 153

7. Song Jobs JOB 09 CHORD SEPARATE • This job plays opens each chord formation (within the specified segment of the specified track) into its individual notes, inserting a specified delay between each note. • If the Clock value is set to 30, a block chord consisting of elements C3, E3, G3 will be played as a C3 (at the chord's original timing) followed 30 cycles later by the E3, and then another 30 cycles later by the G3. This feature is useful, for example, when you want to open up guitar strokes. • Note that it is not possible to break chords over the next measure boundary or into the next chord. 1. Track setting: TR • This parameter selects the target track. 0101 1101 01,...,32 2. Segment • The two boxes to the right of the M select the track segment over which chord separations are executed. The first box sets the measure and beat for the start point; the second box sets the end point. 0101 1101 Measure: beat 001:1,...,999:8 3. Clock cycles • The Clock value sets the number of clock cycles inserted between adjacent chord notes. • Note that there are 480 clock cycles per beat. 0101 1101 000,...,999 152 Chapter 2. SONG MODE