Yamaha QY700 Owner's Manual - Page 290
System
View all Yamaha QY700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 290 highlights
1. System 1. System u 1 System 2 MIDI 3 MIDI filter 4 Sequencer 5 Click 6 Fingered chord zone F1 F2 F3 F4 F5 F6 • Here you can make settings for system-related parameters, such as Master Tune and controller settings. 1. Press u. w The indicator located above u will light, and you will enter Utility mode. 2. Press 1 (System) to access the system page. 3. Move the cursor to the parameter that you wish to set. 4. Use n/y, the data dial, or numeric keypad → e to set the value. 1. Master tune • This sets the overall tuning of the entire QY700 in 0.1 cent steps. • The pitch of drum voices cannot be adjusted here. (→ p.182) • One cent is 1/100th of a semitone. 0101 1101 -102.4 - +000.0 - +102.3 2. Backlite saver • This function automatically turns off the display backlight when the power has been left on for a certain time without any operations being performed. • Like any fluorescent light, the backlight of the QY700 has a finite lifespan. Turning the unit off when it will not be used for an extended time will extend its life as long as possible. However there may be times when the unit will be left on and unused for an extended time. In such cases, you can set Backlite Saver so that the backlight will automatically turn off when the specified time elapses, to conserve the lifespan of the backlight. 0101 1101 6 Off, 1 Hours, 2 Hours, 3 Hours, 4 Hours, 5 Hours, 6 Hours, 7 Hours, 8 Hours Chapter 6. UTILITY MODE 289