Yamaha QY700 Owner's Manual - Page 297

4. Sequencer 3. Interval time • When system exclusive data (bulk data) recorded in a sequence track is played back, an interval of the duration specified by this setting will be inserted between each 1 KB (kilobyte) of data. • When bulk data that was recorded is re-transmitted to an external MIDI device, limitations of the receiving device's bulk data processing power may result in MIDI errors. By setting an appropriate Interval Time, you can transmit bulk data at a rate that the receiving device is able to process. • In sequence tracks, each unit of system exclusive data is recorded in a single location of time. However when this data is played back, the Interval Time function will insert a delay between each 1 KB of data. The delay is specified in units of 100 ms (1/10 second). • If MIDI errors occur on the receiving device, increase the Interval Time setting and try transmitting the data again. 0101 1101 0 - 9 * 100 (msec) • Interval Time settings may cause playback to be delayed. 296 Chapter 6. UTILITY MODE