Yamaha QY700 Owner's Manual - Page 300

6. Fingered chord zone 6. Fingered chord zone u 1 System 2 MIDI 3 MIDI filter 4 Sequencer 5 Click 6 Fingered chord zone F1 F2 F3 F4 F5 F6 • The chord detection function of the QY700's Auto-Accompaniment is referred to as Fingered Chord, and the range in which chord detection is performed is called the Fingered Chord Zone. • Here you can make on/off settings for Fingered Chord, and specify the Fingered Chord Zone etc. 1. Press u. w The indicator located above u will light, and you will enter Utility mode. 2. Press 6 (FngZone) to access the Fingered Chord Zone page. 3. Move the cursor to the parameter that you wish to set. 4. Use n/y, the data dial, or numeric keypad → e to set the value. 1. Fingered chord • Specify whether or not Fingered Chord will be active. • This setting is linked with the "Fingered Chord" settings displayed in Song mode Song Play and in Pattern mode Patch. 0101 1101 OFF (Off), FINGRD (On) 2. Zone low/high • The Fingered Chord Zone is specified by the lowest (Low) and highest (High) note. • Fingered Chord will operate in the keyboard area between the Low and High Zone settings. • Notes below the Zone Low are used to specify On Bass or Original Bass. • Zone settings can be made using n/y or the data dial, and also using the microkeyboard of the QY700. 0101 1101 Zone Low C-2 - G8 Zone High C-2 - G8 (Zone Low