Yamaha QY700 Owner's Manual - Page 74
Song number and name, Pattern setup
View all Yamaha QY700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
• You use SONG PLAY mode to select songs for replay, to start and stop the replay, and to set the various replay parameters. • You can switch into VOICE mode and make adjustments in track voices and track balances while playback is in progress. • By selecting playback of an empty song (a song without data), you can use the auto-accompaniment feature as background for normal keyboard play. (→ p.106) • SONG PLAY includes eight submodes.You can switch from SONG PLAY into any of these submodes by pressing the appropriate key, as follows. 1(PlayFx) Move to Play Effects submode. (→ p.80) 2(TrView) Move to Track View submode. (→ p.100) 3(OutCh.) Move to Output Channel submode. (→ p.103) 5(Save) Move to Save Song submode. (→ p.307) s+5(Save) Move to Save Song submode (SMF save). (→ p.307) 6(Load ) Move to Load Song submode. (→ p.310) s+6(Load) Move to Load Song submode. (→ p.310) e Move to Record submode. (→ p.109) e Move to Song Edit submode. (→ p.129) j Move to Song Job submode. (→ p.138) 1. Press s. w The indicator above the key comes on, and the QY700 en- ters SONG mode (SONG PLAY). 2. Move the cursor onto the song number on the screen, and select the song using the data dial, n/y, or the numeric keypad. 3. Press p to start playback. w The PLAY indicator comes on, and playback begins. 4. To stop the playback, press s. • If you start song replay from a point other than the beginning, you may find that some of the song's PATTERNtrack and CHORD-track data drops out. You can solve the problem by moving the start point to a measure at which a full pattern change occurs. 1. SONG PLAY 1. Song number and name 2 • You use the song number to select a song for playback or recording. • The screen displays the song name (if any) directly to the right of the song number. • To set or change the song name, you use the SONG NAME job (→ p.165). 0101 1101 Song no.: 01,...,20 1. Move the cursor onto the song number on the screen. 2. Select a song number using the data dial, n/y, or the numeric keypad. 2. Pattern setup • This parameter determines whether the QY700 uses the pattern effects (the effects set up within each pattern) during song replay. • If you set this to OFF, the QY700 will not use the pattern effects. Instead, it uses the effects that you have selected under the EFFECT mode. • If you set this to ON, the QY700 uses the effects set up within the current pattern. In this case, the pattern's effect settings overwrite the EFFECT-mode settings. The EFFECTmode settings therefore changes each time the pattern changes. Chapter 2. SONG MODE 73