Yamaha QY700 Owner's Manual - Page 88

• A setting of 100% produces the strongest quantizing, so that all notes are pulled directly onto the nearest line. A setting of 0% effectively switches off all quantizing. Original (recorded) data 1:1 1:2 1:3 1:4 2:1 (Assuming that the quantizing value is set to , and meter is 4/4) If STRENGTH = 100%: 1:1 1:2 1:3 1:4 2:1 If STRENGTH = 50%: 2. Play Effects 0101 1101 000%,...,100%,...,200% 1. Move the cursor to the GROOVE TIMING line for the track you want to set. 2. Set the value using the data dial, n/y, or the numeric keypad. 9. Groove gate time 2 1:1 1:2 1:3 1:4 2:1 0101 1101 000%,...,100% 1. Move the cursor to the STRENGTH line for the track you want to set. 2. Set the value using the data dial, n/y, or the numeric keypad. 8. Groove timing • This value sets the effectiveness of the groove template's CLOCK SHIFT settings. • The formula for the timing adjustment at each interval is as follows: Adjusted timing = original timing + (CLOCK SHIFT × GROOVE TIMING). • A GROOVE TIMING value of 100% will therefore apply the template's clock shift value without change. A value of 200% will double the clock shift, while a setting of 0% will cancel it completely. • This value determines how strongly the groove template's "gate-time multiplier" (see Section 13 below) affects the note gate timing. • The formula for the applied gate-time adjustment at each interval is as follows: Adjusted gate time = original gate time × (100 + (gatetime multiplier -100) × GROOVE GATETIME). • If GROOVE GATETIME is 100%, the QY700 will adjust the note gate times for each interval exactly in accordance with the template's multiplier value for that interval. If GROOVE GATETIME is 0%, the original gate times will be reproduced without change. If GROOVE GATETIME is 200%, the original gate times will be adjusted by double the template's multiplier. • If the adjusted gate time is less than 1, the QY700 automatically uses a value of 1. 0101 1101 000%,...,100%,...,200% 1. Move the cursor to the GROOVE GATETIME line for the track you want to set. 2. Set the value using the data dial, n/y, or the numeric keypad. Chapter 2. SONG MODE 87