Yamaha QY700 Reference Listings - Page 37
Transmit/receive Data - styles
View all Yamaha QY700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
MIDI Data Format SW4 [] MIDI Sync Select whether timing will be determined by the internal clock, or by MIDI Clock messages or MTC received at MIDI IN. (3) TRANSMIT/RECEIVE DATA (3-1) CHANNEL VOICE MESSAGE Transmitted only during recording and playback. Transmission channel can be turned on/off and the transmit channel set for each track. Received only during recording. All channels are always received. During multi track record, data of MIDI channels 0-15 received on either MIDI IN A or B will be recorded separately onto tracks 1-16. * In Record mode, recording is normally Omni ON. However during multi track record, this will be Omni OFF, and data of MIDI channels 0-15 received on either MIDI IN A or B will be recorded separately onto tracks 1-16. (3-1-1) NOTE OFF STATUS NOTE NUMBER VELOCITY 1000nnnn(8nH) 0kkkkkkk 0vvvvvvv n = 0 ' 15 TRACK CHANNEL NUMBER k = 0 (C-2) ' 127 (G8) v is ignored Only recorded. During recording, converted into 9nH kkH 00H. (3-1-2) NOTE ON/OFF STATUS NOTE NUMBER VELOCITY 1001nnnn(9nH) 0kkkkkkk 0vvvvvvv 00000000 n = 0 ' 15 TRACK CHANNEL NUMBER k = 0 (C-2) ' 127 (G8) (v 0) NOTE ON (v 0) NOTE OFF During recording, step recording and edit input of velocity can be turned on/off. (3-1-3) POLYPHONIC KEY PRESSURE STATUS NOTE NUMBER VALUE 1010nnnn(AnH) 0kkkkkkk 0vvvvvvv n = 0 ' 15 TRACK CHANNEL NUMBER k = 0 (C-2) ' 127 (G8) v = 0 - 127 (3-1-4) CONTROL CHANGE STATUS 1011nnnn(BnH) CONTROL NUMBER 0ccccccc CONTROL VALUE 0vvvvvvv n = 0 ' 15 TRACK CHANNEL NUMBER All control change messages are recorded and played back. (3-1-5) PROGRAM CHANGE STATUS 1100nnnn(CnH) PROGRAM NUMBER 0ppppppp (3-1-6) CHANNEL PRESSURE STATUS VALUE 1101nnnn(DnH) 0vvvvvvv (3-1-7) PITCH BEND CHANGE STATUS LSB MSB 1110nnnn(EnH) 0vvvvvvv 0vvvvvvv n = 0 ' 15 TRACK CHANNEL NUMBER p = 0 ' 127 n = 0 ' 15 TRACK CHANNEL NUMBER v = 0 ' 127 n = 0 ' 15 TRACK CHANNEL NUMBER PITCH BEND LSB 0 ' 127 PITCH BEND MSB 0 ' 127 (3-2) CHANNEL MODE MESSAGE The following messages are recorded and played back. RESET ALL CONTROLLERS LOCAL CONTROL OMNI MODE OFF OMNI MODE ON MONO MODE ON POLY MODE ON BnH 78H BnH 7AH BnH 7CH BnH 7DH BnH 7EH BnH 7FH (3-3) SYSTEM COMMON MESSAGE These are transmitted and received as control messages for QY700 functions. They are not recorded as sequence data. (3-3-1) SONG POSITION POINTER STATUS LSB MSB 11110010(F2H) 0vvvvvvv 0vvvvvvv SONG POSITION LSB SONG POSITION MSB Transmitted when you move to a different measure in Song Play mode. Received when in Song Play standby. (3-4) SYSTEM REAL TIME MESSAGE Not recorded as sequence data. (3-4-1) TIMING CLOCK STATUS 11111000(F8H) You can select whether the internal clock will be used as the timing clock, or whether Timing Clock messages from MIDI IN will be used. Transmission and reception can be turned on/off independently. (3-4-2) START STATUS 11111010(FAH) Transmission/reception can be turned on/off. (3-4-3) CONTINUE STATUS 11111011(FBH) Transmission/reception can be turned on/off. (3-4-4) STOP STATUS 11111100(FCH) Transmission/reception can be turned on/off. (3-5) SYSTEM EXCLUSIVE MESSAGE All system exclusive messages are recorded and played back. Even if time intervals existed within the actual data that was received, the entire message between F0 and F7 will be recorded into one timing location. For playback, an interval time can be specified for each 1K bytes. (3-6) SECTION CONTROL 11110000 F0 01000011 43 01111110 7E 00000000 00 0sssssss ss 0ddddddd dd 11110111 F7 Exclusive status YAMAHA ID Style Section Control Section On/Off End of Exclusive gSystem Software h = 08H-0FH, dd=ON is received, and the Pattern will be converted into QY700 sections A-H respectively. (3-7) MIDI TIME CODE(QUARTER FRAME MESSAGE) STATUS 11110001(F1H) 0nnnxxxx If MTC is selected as the Timing Clock, MTC Quarter Frame messages will be received. (3-8) MIDI MACHINE CONTROL These will be received if MTC is selected as the Timing Clock. (3-8-1) STOP(MCS) 11110000 01111111 01111111 00000110 00000001 11110111 F0 Exclusive status 7F RealTime Header 7F device ID 06 MMC Command Message 01 STOP(MCS) F7 End of Exclusive Transmitted when the STOP key is pressed. (3-8-2) DEFERRED PLAY(MCS) 11110000 F0 01111111 7F 01111111 7F 00000110 06 00000001 01 11110111 F7 Exclusive status RealTime Header device ID MMC Command Message DEFERRED PLAY(MCS) End of Exclusive Transmitted when the RUN key is pressed. (3-8-3) LOCATE(MCP) 11110000 F0 01111111 7F 01111111 7F 00000110 06 00000001 01 00000110 06 00000001 01 0tthhhhh hr 0cmmmmmm mn 0kssssss sc 0gifffff fr 0bbbbbbb ff 11110111 F7 Exclusive status RealTime Header device ID MMC Command Message LOCATE(MCP) Byte Count "TERGET" Sub Command standard time specification with sub-frames End of Exclusive Transmitted when you move between measures in Song Play mode. 37