Yamaha RX-V10 Owner's Manual
Yamaha RX-V10 Manual
 |
View all Yamaha RX-V10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Yamaha RX-V10 manual content summary:
- Yamaha RX-V10 | Owner's Manual - Page 1
RX-V10 Natural Sound Stereo Receiver Récepteur stéréo "Son Naturel" OWNER'S MANUAL Thank you for selecting this YAMAHA stereo receiver. MODE D'EMPLOI Nous vous remercions pour avoir porté votre choix sur ce récepteur stéréo YAMAHA. CONTENTS Safety Instructions Inside the Front Cover Caution 2 - Yamaha RX-V10 | Owner's Manual - Page 2
The unit has been dropped, or the cabinet damaged. 16 Servicing - The user should not attempt to service the unit beyond those means described in the operating instructions. All other servicing should be referred to qualified service personnel. 17 Power Lines - An outdoor antenna should be located - Yamaha RX-V10 | Owner's Manual - Page 3
supporting SERVICE GROUNDING ELECTRODE SYSTEM instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE : This product has been tested instructions found in the users manual to eliminate the problem by using one too late, YAMAHA and the - Yamaha RX-V10 | Owner's Manual - Page 4
. Use a clean, dry cloth. 8. Be sure to read the "TROUBLESHOOTING" section regarding common operating errors before concluding that the unit is faulty. serial number is located on the rear of the unit. Retain this Owner's Manual in a safe place for future reference. WARNING TO REDUCE THE RISK OF - Yamaha RX-V10 | Owner's Manual - Page 5
ACCESSORIES After unpacking, check that the following parts are included. AM Loop Antenna Remote Control Transmitter - LEVEL + DELAY/REAR /CENTER TEST EFFECT PROGRAM PROLOGIC ENHANCED ON/OFF VCR DVD/LD 2CH/5CH DIR A DIR B REC/PAUSE PLAY A/B TAPE - PRESET + A/B/C/D/E TUNER DISC - Yamaha RX-V10 | Owner's Manual - Page 6
ENHANCED) q Automatic Input Balance Control for Dolby Pro Logic Surround q Test Tone Generator for Easier Speaker Balance Adjustment q 3 Center Channel Modes Capability (Preset Editing) q IF Count Direct PLL Synthesizer Tuning System q Video Signal Input/Output Capability q 5-Channel Discrete Input - Yamaha RX-V10 | Owner's Manual - Page 7
Sound Field Processor (DSP) built into this unit takes advantage of Yamaha's undisputed leadership in the field of digital audio processing to bring you a whole new world of listening experiences. Follow the instructions in this manual carefully when setting up your system, and this unit will - Yamaha RX-V10 | Owner's Manual - Page 8
below.) The front speakers are used for the main source sound plus the effect sounds. They will probably be the speakers from your present stereo system. The rear speakers are used for the effect and surround sounds, and the center speaker is for the center sounds (dialog etc.) within programs - Yamaha RX-V10 | Owner's Manual - Page 9
made correctly, that is to say L (left) to L, R (right) to R, "+" to "+" and "-" to "-". Also, refer to the owner's manual for each component to be connected to this unit. * If you have YAMAHA components numbered as 1, 2, 3, etc. on the rear panel, connections can be made easily by making sure to - Yamaha RX-V10 | Owner's Manual - Page 10
Connecting with a Dolby Digital (AC-3) Decoder If you have a Dolby Digital (AC-3) Decoder unit or an LD player etc. which incorporates a Dolby Digital (AC-3) Decoder, its discrete outputs can be connected to this unit. OUTPUT MAIN CENTER SURROUND SUBWOOFER Dolby Digital (AC-3) Decoder unit AC-3 RF - Yamaha RX-V10 | Owner's Manual - Page 11
of the subwoofer amplifier, and connect the speaker terminals of the subwoofer amplifier to the subwoofer. With some subwoofers, including the Yamaha Active Servo Processing Subwoofer System, the amplifier and subwoofer are in the same unit. * The SUBWOOFER OUT terminal is for output to a monaural - Yamaha RX-V10 | Owner's Manual - Page 12
How to Connect: Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is the + and - markings are observed. If - Yamaha RX-V10 | Owner's Manual - Page 13
firmly. q If you need an outdoor FM antenna to improve FM reception quality, either 300-ohm feeder or coaxial cable may be used. In locations troubled by electrical interference, coaxial cable is preferable. 11 - Yamaha RX-V10 | Owner's Manual - Page 14
23 4 NATURAL SOUND STEREO RECEIVER RX-V10 POWER 5 INPUT DVD-LD off the digital sound field processor (so that no DSP program name is illuminated on the display) by pressing the speaker system (connected to this unit) you will use to the ON position. Set the switch for the front speaker system you - Yamaha RX-V10 | Owner's Manual - Page 15
received, pressing this button changes the display mode into the PS mode, PTY mode and/or RT mode (if the station employs those RDS data services tuning mode to automatic or manual. To select the automatic tuning mode, press on and the currently selected DSP program changes sequentially and then - Yamaha RX-V10 | Owner's Manual - Page 16
unit. If the CD player and tape deck connected to this unit are YAMAHA components designed for remote control compatibility, then this remote control transmitter will also on/off the digital sound field processor (DSP). 9 TEST key Used for speaker balance adjustment. (For details, refer to page 17, - Yamaha RX-V10 | Owner's Manual - Page 17
's keys. If these keys are identical, their functions will be the same. On each key function, refer to the corresponding instruction on your component's manual. 1 Tape deck keys Controls tape deck. * DIR A, B and A/B are applicable only to double cassette tape deck. * For a single cassette deck - Yamaha RX-V10 | Owner's Manual - Page 18
ST FM PRO LOGIC CONCERT MONO ROCK CONCERT NORMAL WIDE TEST ENHANCED VIDEO MOVIE CONCERT HALL PHANTOM MHz 0 l00 SLEEP service is received. 0 Program type name indicators The name selected in the EON mode lights up. A DSP program indicators The name of a selected DSP - Yamaha RX-V10 | Owner's Manual - Page 19
the front, center, and rear speakers using the built-in test tone generator. When this adjustment is performed, the sound output the front speakers to be used. SPEAKERS B ON OFF A * If you use two front speaker systems, press both the A and B switches. 3 BASS 0 TREBLE 0 BALANCE - + - + Set - Yamaha RX-V10 | Owner's Manual - Page 20
right front speakers. 8 Turn up the volume. VOLUME You will hear a test tone (like pink noise) from the left front speaker, then the center speaker two seconds each. The display changes as shown below. (L and R) * The test tone from the left rear speaker and the right rear speaker will be heard - Yamaha RX-V10 | Owner's Manual - Page 21
Adjustable q When the test tone is output from the rear speakers, pressing the LEVEL key changes the output level of the rear speakers. Notes q Once you have completed these adjustments, you can adjust whole sound level on your audio system by using the VOLUME control (or the VOLUME keys on the - Yamaha RX-V10 | Owner's Manual - Page 22
input source mode. PTY SELECTOR DVD/LD 2CH/5CH 4 Select the front speakers to be used. SPEAKERS B ON OFF A * If you use two front speaker systems, press both the A and B switches. Note When you switch to this "DVD 5cH" mode, the built-in Digital Sound Field processor will not work and - Yamaha RX-V10 | Owner's Manual - Page 23
TUNER/PHONO 5CH / 2CH Selecting the SPEAKER system Because one or two speaker systems (as front speakers) can be connected to this unit, on the tape deck or VCR connected to this unit. Notes q The settings of DSP and the VOLUME, BASS, TREBLE and BALANCE control settings have no effect on the - Yamaha RX-V10 | Owner's Manual - Page 24
an FM station manually, it is received in monaural mode automatically to increase the signal quality. • When tuned in to a station, the frequency of the received station is shown on the display. If an RDS station that employs PS data service is received, the frequency - Yamaha RX-V10 | Owner's Manual - Page 25
English PRESET TUNING MANUAL PRESET TUNING This unit can store station frequencies selected by tuning operation. With this function, you can recall any desired station by only selecting the - Yamaha RX-V10 | Owner's Manual - Page 26
the display. Notes • You can replace a preset station by another FM or AM station manually by simply following the procedure of the section "To store stations" on page 23. • If the number of received stations is not enough to be stored up to E8, the search will be - Yamaha RX-V10 | Owner's Manual - Page 27
English EXCHANGING PRESET STATIONS You can exchange the places of two preset stations with each other as shown below. 2, 4 Example) If you want to shift the preset station on E1 to A5, and vice versa. 1 Recall the preset station on E1 (by following the method of "To recall a preset station" on - Yamaha RX-V10 | Owner's Manual - Page 28
RECEIVING RDS STATIONS Europe and U.K. models only RDS (Radio Data System) is a data transmission system gradually being introduced by FM stations in many countries. Stations using this system . PS (Program Service name) mode: Displays the name of the RDS station now being received instead of the - Yamaha RX-V10 | Owner's Manual - Page 29
Varied: Used for mainly speech-based programs usually of light-entertainment nature, not covered by above categories. Examples are: quizzes, panel games, personality interviews, comedy and satire. POP M Pop: Commercial music, which would generally be considered to be of current popular appeal - Yamaha RX-V10 | Owner's Manual - Page 30
, this mode will not be selected. PTY mode The type of the program on the station being received is displayed. If the station does not employ the PTY data service, this mode will not be selected. (You can make this unit search for a station which is broadcasting a program of your desired program - Yamaha RX-V10 | Owner's Manual - Page 31
SEEK mode. 3 Begin searching all preset RDS stations. PTY SEEK MODE START PTY SEEK MODE START Flashes. * The program type of the station now being received or "NEWS" flashes on the display. 2 Select the desired program type. INPUT DVD-LD/VCR/TAPE/CD/TUNER/PHONO 5CH / 2CH PTY SELECTOR AUTO - Yamaha RX-V10 | Owner's Manual - Page 32
a program when its broadcast starts in place of the program now being received. * This function can be used only when an RDS station that employs the EON data service is received. (When such a station is received, "EON" lights up on the display.) 2 1 Make sure that "EON" is illuminated on the - Yamaha RX-V10 | Owner's Manual - Page 33
can be controlled by selecting a corresponding DSP program including a combined operation of the Yamaha DSP and the Dolby Pro Logic Surround. Brief Dolby Surround. The application of a sophisticated digital signal processing system reduces crosstalk and directs or steers the sound source more - Yamaha RX-V10 | Owner's Manual - Page 34
or PROGRAM 3 - LEVEL + DELAY/REAR /CENTER TEST EFFECT PROGRAM PROLOGIC ENHANCED ON/OFF VCR DVD/LD 2CH and 34.) Notes q If you prefer to cancel the DSP, press the EFFECT key. The sound will be the q When this unit's Dolby Pro Logic Surround system is used, if the main-source sound is - Yamaha RX-V10 | Owner's Manual - Page 35
is already set in "SPEAKER BALANCE ADJUSTMENT" on page 19. 1 Press once or more so that "REAR" appears on the display. DELAY/REAR /CENTER WIDE TEST Notes q This adjustment can be made only when the built-in digital sound field processor is on, or the "DVD 5cH" input source mode is - Yamaha RX-V10 | Owner's Manual - Page 36
Adjustment of DELAY TIME You can adjust the time difference between the beginning of the source sound and the beginning of the effect sound. This adjustment can be made to all programs individually. By applying more or less delay, sound effects, background noise, and ambient noise coming at you - Yamaha RX-V10 | Owner's Manual - Page 37
TROUBLESHOOTING the power cord and contact your authorized YAMAHA dealer or service center for help. Amplifier SYMPTOM The . Connect the cords properly. If the problem persists, the cords may be defective. Select rotate it for best reception. Use the manual tuning method. Use an outdoor antenna and - Yamaha RX-V10 | Owner's Manual - Page 38
SPECIFICATIONS AUDIO SECTION Minimum RMS Output Power per Channel Front L, R 8 ohms, 20 Hz to 20 kHz, 0.04% THD 45W+45W Center 8 ohms, 1 kHz, 0.1% THD 45W Rear 8 ohms, 1 kHz, 0.7% THD 15W Dynamic Power per Channel (by IHF Dynamic Headroom measuring method) [U.S.A. model] 8/6/4/2 ohms 65/80/95/ - Yamaha RX-V10 | Owner's Manual - Page 39
ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
 |
 |
Natural Sound Stereo Receiver
Récepteur stéréo “Son Naturel”
RX-V10
CONTENTS
Safety Instructions
...............
Inside the Front Cover
Caution
............................................................
2
Supplied Accessories
......................................
3
Features
..........................................................
4
Profile of This Unit
...........................................
5
Speaker Setup
................................................
6
Connections
....................................................
7
Controls and Their Functions
........................
12
Speaker Balance Adjustment
........................
17
Basic Operations
...........................................
20
Tuning Operations
.........................................
22
Preset Tuning
................................................
23
Receiving RDS Stations
<
Europe and U.K. models only
>
..................
26
Using Digital Sound Field Processor (DSP)
......................................................................
31
Troubleshooting
.............................................
35
Specifications
................................................
36
TABLES DES MATIERES
Caractéristiques
............................................
37
Accessoires fournis
.......................................
37
Attention
........................................................
38
Aperçu de cet appareil
..................................
39
Installation des enceintes acoustiques
..........
40
Raccordements
.............................................
41
Les commandes et leurs fonctions
.................
46
Réglage de la balance des enceintes
............
51
Fonctionnement de base
...............................
54
Syntonisation
.................................................
56
Syntonisation préréglée
................................
57
Réception des station RDS
<
Modèles pour I’Europe et le Royaume-Uni
seulement
>
...................................................
60
Utilisation du processeur de champ sonore
numérique (DSP)
........................................
65
En cas de difficulté
........................................
69
Caractéristiques techniques
..........................
70
OWNER’S MANUAL
Thank you for selecting this YAMAHA stereo
receiver.
MODE D’EMPLOI
Nous vous remercions pour avoir porté votre
choix sur ce récepteur stéréo YAMAHA.