Yamaha RX-V1067 RX-V1067 / RX-A1000 / HTR-8063 Firmware Update_Installation_Ma
Yamaha RX-V1067 Manual
View all Yamaha RX-V1067 manuals
Add to My Manuals
Save this manual to your list of manuals |
Yamaha RX-V1067 manual content summary:
- Yamaha RX-V1067 | RX-V1067 / RX-A1000 / HTR-8063 Firmware Update_Installation_Ma - Page 1
RX-V1067 FIRMWARE UPDATING PROCEDURE IMPORTANT NOTICE Do not attempt to update your Yamaha receiver using any other data file except those provided directly from the Yamaha website or through your network connection. Follow the instructions carefully and do not attempt any other procedures not - Yamaha RX-V1067 | RX-V1067 / RX-A1000 / HTR-8063 Firmware Update_Installation_Ma - Page 2
RX-V1067 Firmware Update Through the Internet Requirement: Internet connection Your receiver is connected to the Internet if you can receive Internet radio stations. (See owner's manual for details) 1 Power off the receiver (Standby mode) 2 Enter the ADVANCED SETUP mode While pressing the - Yamaha RX-V1067 | RX-V1067 / RX-A1000 / HTR-8063 Firmware Update_Installation_Ma - Page 3
RX-V1067 5 Check the updated firmware version a. Power on the AV receiver and press the ON SCREEN button on the remote control. b. Select "Information" > "System". c. Confirm that the firmware version is updated to the latest version. ON SCREEN button Congratulations! You have completed the - Yamaha RX-V1067 | RX-V1067 / RX-A1000 / HTR-8063 Firmware Update_Installation_Ma - Page 4
RX-V1067 Firmware Update by USB Requirement: USB thumb drive, with enough free space to store over 25MB. (File system with FAT16 or FAT32 format) Firmware file provided by YAMAHA,"RXV1067-xxxx.bin". 1 Prepare USB thumb drive for the update Download the firmware, unzip and copy "RXV1067-xxxx.bin" - Yamaha RX-V1067 | RX-V1067 / RX-A1000 / HTR-8063 Firmware Update_Installation_Ma - Page 5
RX-V1067 6 Start firmware update a. Press INFO button to start the update. (Update process may take up to 15 minutes) * If " 6 1 % " 5 & 6 / " 7 " * - " appears, this means your receiver is already up-to-date. In this case, power off to exit from Advanced Setup. Your AV receiver is ready for - Yamaha RX-V1067 | RX-V1067 / RX-A1000 / HTR-8063 Firmware Update_Installation_Ma - Page 6
RX-V1067 Troubleshooting CASE 1 "UPDATE FAIL" appeared during the update Cause: Method: For some reason, the receiver can't read the firmware data. For your solution, check the following [Update through Internet] ❏ Check Internet connection. Your Internet connection is working by playing an
FIRMWARE UPDATING PROCEDURE
IMPORTANT NOTICE
Do not attempt to update your Yamaha receiver using any other data file except those provided directly from the
Yamaha website or through your network connection.
Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by
Yamaha.
Improperly updated products may cause improper operation, and any parts or service required to restore proper
operation will not be covered under the Yamaha Limited Warranty.
Choose from the following 2 methods to update to the latest firmware.
Click here for
Firmware Update Through the Internet
(Connection to the Internet is required)
Click here for
Firmware Update by USB
(A USB thumb drive is required)
In case of error, see the
Troubleshooting
section
1
RX-V1067