Yamaha RX-V473 Owners Manual - Page 12
Placing speakers, Speaker placement - model
View all Yamaha RX-V473 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
1 Speaker placement 2 3 4 5 6 7 8 9 10 1 Placing speakers Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the representative speaker layout examples. Caution • (U.S.A. and Canada models only) Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit's speaker impedance to "6 Ω MIN". In this case, you can also use 4-ohm speakers as the front speakers. For details, see "Setting the speaker impedance" (p.14). • (Except for U.S.A. and Canada models) Use speakers with an impedance of at least 6 Ω. Speaker type Front (L) Front (R) Center Surround (L) Surround (R) Surround back (L)* Surround back (R)* Surround back* Subwoofer * RX-V573 only Abbr. Function 1 Produce front right/left channel sounds (stereo sounds). 2 3 Produces center channel sounds (such as movie dialogue and vocals). 4 Produce surround right/left channel sounds. 5 6 Produce surround back left/right channel sounds. 7 8 Produces sounds mixed from surround back left/right channel sounds. 9 Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels. This channel is counted as "0.1". Speaker system (the number of channels) 7.1* 6.1* 5.1 4.1 3.1 2.1 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● • RX-V573 supports 2- to 7.1-channel system, and RX-V473 supports 2- to 5.1-channel speaker system. PREPARATIONS ➤ Placing speakers En 12