Yamaha RX-V590 Owner's Manual

Yamaha RX-V590 - AV Receiver - Dark Manual

Yamaha RX-V590 manual content summary:

  • Yamaha RX-V590 | Owner's Manual - Page 1
    RX-V590 Natural Sound Stereo Receiver Récepteur stéréo "Son Naturel" Receptor estéreo de Sonido Natural OWNER'S MANUAL MODE D'EMPLOI MANUAL DE INSTRUCCIONES
  • Yamaha RX-V590 | Owner's Manual - Page 2
    parts are included. q Après le déballage, vérifier que les pièces suivantes sont incluses. q Desembale el aparato y verificar que los siguientes accesorios están en la caja. q Remote Control General model) (Modèle général) (Modelo general) q User Program Sheets (U.S.A., Canada and Australia models
  • Yamaha RX-V590 | Owner's Manual - Page 3
    of This Unit 5 Speaker Setup for This Unit 6 Connections 7 Speaker Balance Adjustment 12 Basic Operations 15 Tuning Operations 18 Preset Tuning 19 Using Digital Sound Field Processor (DSP 22 Setting the SLEEP Timer 26 Remote Control Transmitter 27 Troubleshooting 33 Specifications 34 3
  • Yamaha RX-V590 | Owner's Manual - Page 4
    Do not use force on switches, controls or connection wires. When moving the 8. Be sure to read the "TROUBLESHOOTING" section regarding common operating errors before located on the rear of the unit. Retain this Owner's Manual in a safe place is turned off. FREQUENCY STEP switch (General Model only)
  • Yamaha RX-V590 | Owner's Manual - Page 5
    sound stability at each channel and minimizes crosstalk between channels compared to conventional analog Dolby signal processing. In addition, this unit features a built-in automatic input balance control. This circuit always presents you the best surround conditions without performing manual
  • Yamaha RX-V590 | Owner's Manual - Page 6
    . q Be sure to set the center channel mode to the "PHANTOM" position. (For details, refer to page 13.) Front L Center Front R Front L Front R Dialogue Dialogue Surround sound Rear L Rear R Surround sound Rear L Rear R SPEAKER PLACEMENT The recommended speaker configuration, the
  • Yamaha RX-V590 | Owner's Manual - Page 7
    ) to R, "+" to "+" and "-" to "-". Also, refer to the owner's manual for each component to be connected to this unit. Turntable Monitor TV LD player SIGNAL IN OUT VCR 1 IN OUT VCR 2 FRONT (U.S.A. model) OUTPUT FRONT CENTER REAR LOW PASS fc:200Hz AC OUTLETS SWITCHED I20W MAX. TOTAL l20W
  • Yamaha RX-V590 | Owner's Manual - Page 8
    and place them on both sides of the TV to orient the center sound at the center position. For connecting two center speakers, follow the method shown below. REAR CENTER C D DUAL SINGLE IMPEDANCE SELECTOR switch (Canada model only) Be sure to switch this only when the power of this unit
  • Yamaha RX-V590 | Owner's Manual - Page 9
    possible. If the connections are faulty, no sound will be heard from the speakers. Make sure parts of this unit as this could damage this unit and/or speakers. Note Use speakers with the specified impedance shown on the rear wire.  Banana Plug connections
  • Yamaha RX-V590 | Owner's Manual - Page 10
    INPUT terminal of the subwoofer amplifier, and connect the speaker terminals of the subwoofer amplifier to the subwoofer. With some subwoofers, including the Yamaha Active Servo Processing Subwoofer System, the amplifier and subwoofer are in the same unit. OUTPUT FRONT CENTER REAR LOW PASS fc:200Hz
  • Yamaha RX-V590 | Owner's Manual - Page 11
    firmly. q If you need an outdoor FM antenna to improve FM reception quality, either 300-ohm feeder or coaxial cable may be used. In locations troubled by electrical interference, coaxial cable is preferable. 11
  • Yamaha RX-V590 | Owner's Manual - Page 12
    sound field processor. The adjustment of each speaker output level should be done at your listening position with the remote control transmitter. Otherwise, the result may not be satisfactory. < > For U.S.A., Canada and Australia models only Use the remote control transmitter with the YPC-USER
  • Yamaha RX-V590 | Owner's Manual - Page 13
    MODE NORMAL WIDE PHANTOM On the feature of each mode, refer to the "Note" shown below. Flashes continuously. 8 Turn up the volume. MASTER VOLUME VOLUME Note In step 6, when you select the center channel output mode, note the following
  • Yamaha RX-V590 | Owner's Manual - Page 14
    , you can adjust whole sound level on your audio system by using the VOLUME control (or the VOLUME keys on the remote control transmitter). q If you use external power amplifiers, their volume controls may also be adjusted to achieve proper balance. q In step 10, if the center channel mode is in the
  • Yamaha RX-V590 | Owner's Manual - Page 15
    , turn the controls, etc. (refer to page 17) and use the digital sound field processor. (Refer to page 24.) Notes on using the input selector buttons q Note that pressing on each input selector button selects the source which is connected to the corresponding input terminals on the rear panel
  • Yamaha RX-V590 | Owner's Manual - Page 16
    Play the source and then turn the VOLUME control up to confirm the input source. (For detailed information on the tuning operations, refer to page 18.) 3 Set the tape deck or VCR to the recording mode. 4 If the tape deck is used for recording, you can monitor the sounds being recorded by pressing
  • Yamaha RX-V590 | Owner's Manual - Page 17
    increase (or counterclockwise to decrease) the low frequency response. TREBLE : Turn this clockwise to increase (or counterclockwise to decrease) the high frequency response. Note These controls are effective only for the sound from the front speakers. When you listen with headphones Connect the
  • Yamaha RX-V590 | Owner's Manual - Page 18
    AUTO TUNING" goes off. 3 DOWN TUNING UP 3 Tune to a desired station manually. DOWN TUNING manually, it is received in monaural mode automatically to increase the signal quality. Œ Displays the band and frequency of the received station.  Lights up when an FM stereo broadcast is received in stereo
  • Yamaha RX-V590 | Owner's Manual - Page 19
    MANUAL for about 5 seconds. 4 Press a preset station button before "MEMORY" goes off from the display. PRESET STATIONS l 2 3 4 5 6 7 the setting of the reception mode (stereo or monaural) is stored along with the station frequency. PRESET FM AUTO TUNING STEREO MHz 0 20 l00 RE Shows
  • Yamaha RX-V590 | Owner's Manual - Page 20
    station" on page 19. Notes q You can replace a preset station by another FM or AM station manually by simply following the procedure of the section "To store stations" on page 19. q If the number of received stations is not enough to be stored up to E8, the search is finished automatically when
  • Yamaha RX-V590 | Owner's Manual - Page 21
    English EXCHANGING PRESET STATIONS You can exchange the places of two preset stations with each other as shown below. 2, 4 Example) If you want to shift the preset station on E1 to A5, and vice versa. 1 Recall the preset station on E1 (by following the method of "To recall a preset station" on
  • Yamaha RX-V590 | Owner's Manual - Page 22
    VCR 2 VCR 1 LD/TV DIGITAL SOUND FIELD PROCESSOR CONCERT MONO PRO LOGIC ENHANCED VIDEO MOVIE STADIUM ROCK CONCERT DISCO CONCERT HALL EFFECT 23 4 5 6 Remote Control Transmitter Australia models 5 3 4 TRANSMIT /LEARN USER YPC LEARN POWER SLEEP TV
  • Yamaha RX-V590 | Owner's Manual - Page 23
    Dolby Stereo decoders used in movie theaters. By employing a four-channel system, the Dolby Pro Logic Surround system divides the input signals into four levels: the left and right main channels, the center channel (to characterize dialog), and the rear surround-sound channels (to characterize sound
  • Yamaha RX-V590 | Owner's Manual - Page 24
    Pro Logic Surround system is used, if the main-source sound is considerably altered by overadjustment of the BASS or TREBLE controls, the relationship between the center and rear channels may produce an unnatural effect. * The following adjustments can be done on the remote control transmitter as
  • Yamaha RX-V590 | Owner's Manual - Page 25
    all the digital sound field programs. q If DOLBY PRO LOGIC or a digital sound field program is not used, the REAR LEVEL control will not function. TIME control, the value changes continuously. However, the value stops changing momentarily at the preset point. DELAY TIME Adjustable STEREO DELAY
  • Yamaha RX-V590 | Owner's Manual - Page 26
    controlled only with the remote control transmitter. q The components on which the SLEEP timer is effective are the sources connected to the SWITCHED AC OUTLET(S) on the rear panel Note The SLEEP timer setting can also be canceled by turning off the power with the POWER switch or disconnecting the
  • Yamaha RX-V590 | Owner's Manual - Page 27
    and Australia models Remote control transmitter operation range 2 13 1 Remote control sensor Within approximately 6m (19.7 feet) 30° 30° 3 Notes q There should be no large obstacles between the remote control transmitter and the main unit. 2 q If the remote control sensor
  • Yamaha RX-V590 | Owner's Manual - Page 28
    1 CENTER SUR. LEVEL MONO MOVIE STADIUM DISCO VCR 2 ROCK HALL EFFECT ON/OFF V AUX REAR LEVEL DELAY TIME VOLUME 7 8 * When you operate this unit and/or other YAMAHA components with this remote control transmitter, set the YPC-USER-LEARN switch to the YPC (Yamaha Preset Code) position. 28
  • Yamaha RX-V590 | Owner's Manual - Page 29
    For Other Component Control Identify the remote control transmitter keys with your component's keys. If these keys are identical, their functions will be the same. On each key function, refer to the corresponding instruction on your component's manual. 1 CD player keys Controls compact disc player
  • Yamaha RX-V590 | Owner's Manual - Page 30
    key functions (for controlling this unit and/or YAMAHA components). * "YPC" is the abbreviation of YAMAHA Preset Code. USER: Set to this position when using "learned" key functions. LEARN: Set to this position when learning new key functions from other remote control transmitters. ˜ Blank keys
  • Yamaha RX-V590 | Owner's Manual - Page 31
    5-10 cm (2-4 in.) Notes q When you operate the desired component with this remote control transmitter, TRANSMIT/LEARN indicator will flash steadily. q The originally preset function of a key is still available in the USER position if a new function has not been learned to the key. q Successful
  • Yamaha RX-V590 | Owner's Manual - Page 32
    1 USER YPC Trouble shooting guide SYMPTOM The remote control remote control transmitter are weak. The distance between the two remote control transmitters is too long or too short. The signal coding or modulation of the other remote control transmitter is not compatible with this remote control
  • Yamaha RX-V590 | Owner's Manual - Page 33
    the power cord and contact your authorized YAMAHA dealer or service center for help. Amplifier SYMPTOM The unit fails to turn on when the POWER switch is pressed. No sound or no picture. The sound suddenly goes off. Only one side speaker outputs the sound. Sound "hums". The volume level is low
  • Yamaha RX-V590 | Owner's Manual - Page 34
    /8 ohms 0.02% or less REAR L/R 1 kHz, 10W/8 ohms Channel Selectivity 85 dB Signal-to-Noise Ratio (IHF) Mono/Stereo 80 dB/75 dB Harmonic Distortion (1 kHz) Mono/Stereo 0.1/0.2% Stereo Remote control transmitter Batteries User Program Sheets (U.S.A.,Canada and Australia models only) Specifications
  • Yamaha RX-V590 | Owner's Manual - Page 35
    ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35

OWNER’S MANUAL
MODE D’EMPLOI
MANUAL DE INSTRUCCIONES
Natural Sound Stereo Receiver
Récepteur stéréo “Son Naturel”
Receptor estéreo de Sonido Natural
RX-V590