Yamaha RX-V670 Owner's Manual - Page 17

PRESET TUNING This unit can store station frequencies (selected by tuning operation) by using preset station buttons. With this function, you can select any desired station simply by pressing the corresponding preset station button. Up to 40 stations (8 stations per page) can be programmed. 4, 2 (Preset station buttons) 2, 1 To program stations 1 Tune to the desired station. (Refer to the previous page for tuning procedures.) 2 Select the desired page (A - E) of preset station buttons while watching the display. A/B/C/D/E PRESET FM MHz 3 MEMORY PRESET FM MEMORY MHz 4 Press a preset station button before "MEMORY" goes off from the display. 3 To recall a preset station 1 Select the page of preset station buttons. A/B/C/D/E PRESET FM MHz 2 Select the desired preset station button. Notes q A new setting can be programmed in place of the former one. q For presets, the setting of the reception mode (stereo or monaural) is stored along with the station frequency. PRESET FM MHz AUTO TUNING 0 40 60 80 100 STEREO Shows the displayed station has been programmed to A1. * In the same way, program other stations to A2, A3 ... A8. * You can program more stations to the preset station buttons on other pages in the same way by selecting other pages in step 2. Memory back-up The memory back-up circuit prevents the programmed data from being lost even if the POWER switch is turned off or the power plug is disconnected from the AC outlet or the power is cut due to temporary power failure. If, however, the power is cut for more than two weeks, the memory may be erased. If so, it can be re-programmed simply by following the PRESET TUNING steps. 17