Yamaha RXV465 Owner's Manual - Page 43

INTRODUCTION PREPARATION BASIC OPERATION Operating various settings for this unit (Setup menu) Basic operation of the setup menu 1 Press lSETUP on the remote control. The setup menu screen appears. 2 Select a menu using nCursor k / n, and press nENTER. Items of the selected menu are displayed. For example, the following screen appears when you select "Function Setup." 1 HDMI y • You can return to the previous screen by pressing nRETURN. 3 To display submenus, select a menu that you want to set using nCursor k / n, and press nENTER. For example, the following screen appears when you select "2 Display." Dimmer;;;;;;;0 4 Select an item using nCursor k / n, and change the setting of the item using nCursor l / h. y • You can change other items by repeating step 4. 5 To finish the setting, press lSETUP. y • When nCursor or other keys do not work after completing the menu, select the input source again using gInput selection keys. Speaker Setup You can set various items for speakers. Two kinds of adjustments are available. One is "Auto Setup (YPAO)" for automatic adjustment and another is "Manual Setup" for manual adjustment. y • The default settings are marked with "*." 1 Auto Setup Automatically adjusts output characteristics of speakers to obtain optimum balance for the output sound based on positions and performances of the speakers and acoustic characteristics or the room, which are automatically measured. For details on operations, see page 18. 2 Manual Setup Adjusts output characteristics of speakers based on manually set parameters. After Auto Setup (YPAO) is performed, you can check automatically adjusted parameters in the Manual Setup menu. Fine adjust the parameters for your preference if necessary. ■ A)Config Sets speaker configurations, such as connection status of speaker and a size of the connected speaker (sound reproduction capacity), suitable for the listening environment. y • The speaker configuration includes items for defining a speaker size: Large or Small. Large and Small refer to speakers with woofer diameters 16 cm or larger and smaller than 16 cm, respectively. Bass Out Choices: SWFR/Front/Both* Selects speaker(s) for outputting low-frequency components of the LFE (low-frequency effect sound) channel or other channels. The output status is as follows. LFE channel signals Parameter Subwoofer Front speakers Both Output Not output SWFR Output Not output Front Not output Output Other speakers Not output Not output Not output ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX English 39 En