Yamaha S03 Data List - Page 21

Yamaha S03 Manual

Page 21 highlights

2.1.1 Universal realtime messages 2.1.1.1 Master Volume 11110000 01111111 01111111 00000100 00000001 * 0sssssss 0ttttttt 11110111 F0H 7FH 7FH 04H 01H SSH TTH F7H Exclusive status Universal Real Time ID of target device Sub-ID #1=Device Control Message Sub-ID #2=Master Volume Volume LSB Volume MSB End of Exclusive 2.1.3.1 XG System On 11110000 01000011 0001nnnn 01001100 00000000 00000000 01111110 00000000 11110111 F0H 43H 1NH 4CH 00H 00H 7EH 00H F7H Exclusive status YAMAHA ID N:device Number Model ID Address High Address Mid Address Low Data End of Exclusive or, 11110000 01111111 0xxxnnnn 00000100 00000001 0sssssss 0ttttttt 11110111 F0H 7FH XNH 04H 01H SSH TTH F7H Exclusive status Universal Real Time n:Device Number, x=don't care Sub-ID #1=Device Control Message Sub-ID #2=Master Volume Volume LSB Volume MSB End of Exclusive When On is received, the SOUND MODULE MODE will be set to XG. Since approximately 50[ms] are required in order to execute this message, please allow an appropriate interval before transmitting the next message. 2.1.3.2 XG System parameter change This message sets the XG SYSTEM block (refer to tables , ). 2.1.3.3 Multi Effect1 parameter change This message sets the MULTI EFFECT1 block (refer to tables , ). The S03 responds to this message only when it is set to the Multi mode. 2.1.3.4 Multi Part parameter change This message sets the MULTI PART block (refer to tables , ). The S03 responds to this message only when it is set to the Multi mode. 2.1.3.5 Drums Setup parameter change This message sets the DRUMS SETUP block (refer to tables , ). The S03 responds to this message only when it is set to the Multi mode. When this is received, the Volume MSB will be reflected by the System parameter MASTER VOLUME. *The binary expression 0sssssss is expressed in hexadecimal as SSH. The same applies elsewhere. 2.1.2 Universal non-realtime messages 2.1.2.1 General MIDI System On 11110000 01111110 01111111 00001001 00000001 11110111 F0H 7EH 7FH 09H 01H F7H Exclusive status Universal Non-Real Time ID of target device Sub-ID #1=General MIDI Message Sub-ID #2=General MIDI On End of Exclusive 2.1.4 S03 native parameter change This message sets parameters unique to the S03. Each message sets a single parameter. Each message modifies a single parameter. The message format is as follows. 11110000 01000011 0001nnnn 01101100 0ggggggg 0mmmmmmm 0lllllll 0sssssss : 11110111 F0H 43H 1NH 6CH GGH MMH LLH SSH : F7H Exclusive status YAMAHA ID N:device Number Model ID Address High Address Mid Address Low Data End of Exclusive or, 11110000 01111110 0xxxnnnn 00001001 00000001 11110111 F0H 7EH XNH 09H 01H F7H Exclusive status Universal Non-Real Time n:Device Number, x:don't care Sub-ID #1=General MIDI Message Sub-ID #2=General MIDI On End of Exclusive When this message is received, the SOUND MODULE MODE is set to XG, and all MIDI messages defined by GM will be received. All data except for MIDI Master Tuning will be restored to the default value. Since approximately 50[ms] is required in order to process this message, be sure to allow an appropriate interval before sending the next message. 2.1.2.2 Identity Request 11110000 01111110 0mmmmmmm 00000110 00000001 11110111 F0H 7EH MMH 06H 01H F7H Exclusive status Universal Non-Real Time Device Number Sub-ID #1=General Information Sub-ID #2=Identity Request End of Exclusive For parameters whose Data Size is 2 or 4, the number of data bytes indicated by Size are transmitted. 2.1.4.1 Native System parameter change This message sets the NATIVE SYSTEM block (refer to tables , ). 2.1.4.2 Remote Switch parameter change This message sets the REMOTE SWITCH block(refer to tables , ). 2.1.4.3 Normal Voice parameter change This message sets the NORMAL VOICE (Edit Buffer) block (refer to tables , , ). The S03 responds to this message only when it is set to the Voice mode. 2.1.4.4 Drum Voice parameter change This message sets the Drum VOICE (Edit Buffer) block (refer to tables , , ). The S03 responds to this message only when it is set to the Voice mode. 2.1.5 Other parameter changes 2.1.5.1 Master tuning This message simultaneously modifies the tuning of all channels. When this message is received, this device will transmit an Identity Reply message as described in the following section2.1.2.3. 2.1.2.3 Identity Reply 11110000 01111110 0mmmmmmm 00000110 00000010 01000011 00000000 01000001 01110111 00000100 00000000 00000000 00000000 00000001 11110111 F0H 7EH MMH 06H 02H 43H 00H 41H 77H 04H 00H 00H 00H 01H F7H Exclusive status Universal Non-Real Time Device Number Sub-ID #1=General Information Sub-ID #2=Identity Reply YAMAHA ID Device Family Code LSB S03 ID Device Family Code MSB S03 ID Device Number Code LSB S03 ID Device Number Code MSB S03 ID #1 #2 #3 #4 = Tone Generator Code=XG = End of Exclusive This device will transmit this message when it receives the Identity Request message of 2.1.2.2. 2.1.3 XG parameter change This message sets XG-related parameters. Each message can set a single parameter. The message format is as follows. 11110000 01000011 0001nnnn 01001100 0ggggggg 0mmmmmmm 0lllllll 0sssssss : 11110111 F0H 43H 1NH 4CH GGH MMH LLH SSH : F7H Exclusive status YAMAHA ID N:device Number Model ID Address High Address Mid Address Low Data End of Exclusive 11110000 01000011 0001nnnn 00100111 00110000 00000000 00000000 0000mmmm 0000llll 0xxxxxxx 11110111 F0H 43H 1NH 27H 30H 00H 00H 0MH 0LH XXH F7H Exclusive status YAMAHA ID N:device Number Model ID Address High Address Mid Address Low Master Tune MSB Master Tune LSB don't care End of Exclusive Normally, the XG SYSTEM message MASTER TUNE should be used (refer to table ). For parameters whose Data Size is 2 or 4, the appropriate amount of data will be transmitted as indicated by Size 21




Type your new search above

The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.

Yamaha S03 Manual