Yamaha TSS-10 Owner's Manual - Page 4

CHECKING THE ACCESSORIES Check your package to make sure it contains the following items. Remote control INPUT MODE REAR S.WOOFER VOLUME MUTE TEST Batteries (AAA, R03, UM-4) Power cable Fastener (1 set) Non-skid pads (for the center speaker) (3 sets: 24 pieces) AC adaptor (LSE9802B1540) 3.5 mm stereo mini/ RCA stereo pin cable Stand (for the amplifier unit) Screws (2 pieces) Optical cable Audio pin cable INSTALLING BATTERIES IN THE REMOTE CONTROL Insert the batteries in the correct direction by aligning the + and - marks on the batteries with the polarity markings (+ and -) inside the battery compartment. 2 1 3 I Notes on batteries • Change all of the batteries if you notice a decrease in the operating range of the remote control. • Do not use old batteries together with new ones. • Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color. • If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. 1 Press the part and slide off the battery compartment cover. 2 Insert the two batteries (AAA, R03, UM-4 type) with + and - oriented properly. The batteries can be set only from the direction shown in the figure. 3 Slide the cover back on so that it snaps into place. 2