Yamaha YM-410D Owner's Manual

Yamaha YM-410D Manual

Get Yamaha YM-410D PDF manuals and user guides View all Yamaha YM-410D manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha YM-410D manual content summary:

  • Yamaha YM-410D | Owner's Manual - Page 1
    CONCERT MARIMBAS YM-460/460F/410D/410/410F YM-46/41 OWNER'S MANUAL Make sure to read "PRECAUTIONS FOR HANDLING GAS SPRING" and "PRECAUTIONS".
  • Yamaha YM-410D | Owner's Manual - Page 2
    you use the concert marimba, carefully read the instructions listed below and the owner's manual. Cautions when setting the instrument. Never place by the frame end and push forward slowly. YM-41 41 kg (90 lbs 6 oz) YM-46 44 kg (97 lbs) YM-410 YM-410F YM-410D 49 kg (108 lbs) 55 kg (121
  • Yamaha YM-410D | Owner's Manual - Page 3
    persons and follow the instructions outlined in this manual. Assembly in the wrong order can cause the pipes to drop which may result in an injury, impair the performance functionality of the instrument or cause noise. • Adjusting the playing height (see page 32) on the YM-410/410F/460/460F should
  • Yamaha YM-410D | Owner's Manual - Page 4
    as well as rich volume to your content. This manual describes proper use of YAMAHA's concert marimbas. Please read it thoroughly to ensure that 410D, and 46 utilize folding designs with two-section frames and pipes to provide the utmost in compact convenience. 4. Height Adjustment (YM-460, 460F, 410
  • Yamaha YM-410D | Owner's Manual - Page 5
    NOMENCLATURE ■ YM-460/460F/410/410F/46/41 * The illustration shows model YM-460. Accidental tone bars Rail Natural tone bars Suspension cord Frame end Leg (Small end) Slant shaft Resonators (Accidental tone side) ■ YM-410D Rail Reinforcement stay (Small end) Reinforcement stay (Large end)
  • Yamaha YM-410D | Owner's Manual - Page 6
    Clamp on both sides o Rail (4) YM-460/460F, 46: Two-section folding type YM-410/410F, 41: One-piece type YAMAHA logo !0 Leg (Large end) YM-460/460F, 410/410F: With height adjustment YM-46/41: Without height adjustment t Reinforcement stay YM-460/460F, 46: 2 sections YM-410/410F, 41: One-piece type
  • Yamaha YM-410D | Owner's Manual - Page 7
    recommend to you to assemble the instrument on a soft rug or carpet. z Connect the large and the small end legs using the reinforcement stays. * YM-460/460F/410/410F: Before proceeding to the next step, make sure that the slide leg fixing bolts of the large and small end legs are securely
  • Yamaha YM-410D | Owner's Manual - Page 8
    /460F/410/410F/46/41 ASSEMBLY 1-2. YM-460/460F/46: Connect the reinforcement stays at the center. Align the end of the fixing bolt and the holes in the reinforcement stays and tighten the fixing bolt securely. * Insert the support using the reference hole close to the hole for the screw as a guide
  • Yamaha YM-410D | Owner's Manual - Page 9
    be adjusted at this point. (Refer to n on page 32.) Rail (4): With YAMAHA logo. Logo side facing the audience. (3): Both sides have clamps attached. The side the stay in the long frame (2) and firmly tighten the screw. * The YM-410 and 410F have two (2) holes. When leg height is set low, use the
  • Yamaha YM-410D | Owner's Manual - Page 10
    /46/41 ASSEMBLY c Attach the resonators. 3-1. Assemble the resonator pipes of the YM-460, 460F, 410, 410F, and 46. Make sure that the natural tone and accidental tone sides are properly assembled. All pipes on the natural tone side have bottoms
  • Yamaha YM-410D | Owner's Manual - Page 11
    YM-460/460F/410/410F/46/41 ASSEMBLY v Insert the rails (1) and (4) into the frame ends of the legs. 4-1. Insert the outer rails (1) and (4) in the same way as
  • Yamaha YM-410D | Owner's Manual - Page 12
    /410F/46/41 ASSEMBLY YM-460/460F/410/410F Only n Adjust the height of the tone bars. Make sure that the channels on the slide legs firmly fixing the legs in place. Use the next channel above as a guide to make sure the tone bars are parallel with the floor. Upon completion of assembly, check to make
  • Yamaha YM-410D | Owner's Manual - Page 13
    YM-410D CONFIRMATION OF PACKING CONTENTS The shipping carton of your marimba should (Accidental tone side) u Rail (2) Rail clamp i Rail (3) Threaded hole Clamp on both sides o Rail (4) YAMAHA logo !0 Leg (Large end) t Reinforcement stay For low sound side !1 Leg (Small end) For high sound
  • Yamaha YM-410D | Owner's Manual - Page 14
    YM-410D ASSEMBLY For safety, the instrument should be assembled by at reinforcement stays and tighten the fixing bolt securely. * Insert the support using the reference hole close to the hole for the screw as a guide. Screw hole Tighten Reinforcement stay (Small end) Reference hole Reinforcement
  • Yamaha YM-410D | Owner's Manual - Page 15
    of the large end leg as far as it will go (aligning the notch with the fixing bolt) and tighten the fixing bolt securely. YM-410D ASSEMBLY Fixing bolt Leg E E Reinforcement stay Notch Fixing bolt Leg (Large end) Tighten Notch Reinforcement stay 1-4. In the same way, install the reinforcement
  • Yamaha YM-410D | Owner's Manual - Page 16
    YM-410D ASSEMBLY x Insert the rails (2), (3) and (4) into the frame ends of the sides into grooves alternately little by little until both sides are inserted fully and stop. Rail (4): With YAMAHA logo. Logo side facing the audience. (3): Both sides have clamps attached. The side with the shorter
  • Yamaha YM-410D | Owner's Manual - Page 17
    YM-410D ASSEMBLY c Attach the resonators. 3-1. Assemble the resonator pipes. Make sure that the natural tone and accidental tone sides are properly assembled. All pipes on the
  • Yamaha YM-410D | Owner's Manual - Page 18
    YM-410D ASSEMBLY v Insert the rail (1) into the frame ends of the legs. 4-1. Insert the outer rail (1) in the same way as the inner rails (2), (3) and (4). A mark "A"
  • Yamaha YM-410D | Owner's Manual - Page 19
    : 100mm Diameter Casters ● SCALE RANGE ■ YM-410D/410/410F ● Range: C28 - C76 (4 octave) ● Bars: YM-410D: Honduras Rosewood, Open Pore Finish YM-410: Honduras Rosewood, Open Pore Finish YM-410F: Acoustalon (FRP), Brown Urethane Finish ● Bar sizes: YM-410D/410: 58 - 38 mm (2.2 - 1.5") wide 25
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
CONCERT
MARIMBAS
YM-460/460F/410D/410/410F
YM-46/41
OWNER’S MANUAL
Make sure to read “PRECAUTIONS FOR HANDLING
GAS SPRING” and “PRECAUTIONS”.