Yamaha YSP 1100 Owner's Manual
Yamaha YSP 1100 - Digital Sound Projector Five CH Speaker Manual
 |
UPC - 027108926490
View all Yamaha YSP 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Yamaha YSP 1100 manual content summary:
- Yamaha YSP 1100 | Owner's Manual - Page 1
UAB YSP-1100 Digital Sound Projector OWNER'S MANUAL - Yamaha YSP 1100 | Owner's Manual - Page 2
servicing) instructions in the literature accompanying the appliance. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions obsolete outlet. 10 Protect the power supply cable from being walked the cart, stand, tripod, bracket, or table specified by the - Yamaha YSP 1100 | Owner's Manual - Page 3
product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by YAMAHA may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product - Yamaha YSP 1100 | Owner's Manual - Page 4
qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons. 15 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet. 16 Be sure to read the "TROUBLESHOOTING" section - Yamaha YSP 1100 | Owner's Manual - Page 5
TV tuner 19 Connecting a digital airwave tuner 20 Connecting other external components 21 Connecting a subwoofer 22 Connecting the power supply cable 23 About the RS-232C/REMOTE IN/IR-OUT terminals 23 SETUP GETTING STARTED 24 Installing batteries in the remote control 24 Operation range - Yamaha YSP 1100 | Owner's Manual - Page 6
in the hope that your listening room will give you the same kind of surround sound experience as your local movie theater. YAMAHA YSP-1100 Digital Sound Projector challenges this preconception that complicated speaker setup and troublesome wiring go hand-in-hand with the enjoyment of multi-channel - Yamaha YSP 1100 | Owner's Manual - Page 7
remote control codes to be used to control the DVD player, VCR, cable TV tuner and digital satellite tuner connected to this unit. In addition, the remote control is equipped with the macro capability so that you can perform a series of operations with the press of a single button. AUTO SETUP - Yamaha YSP 1100 | Owner's Manual - Page 8
6 Change the beam modes and/or CINEMA DSP settings. See "ENJOYING SURROUND SOUND" on page 42. If you want to make additional settings and adjustments 7 Run MANUAL SETUP to fine-tune settings and/or set remote control codes. See "MANUAL SETUP" on page 60 and "REMOTE CONTROL FEATURES" on page 81. 4 En - Yamaha YSP 1100 | Owner's Manual - Page 9
all of the following parts. Remote control (×1) Batteries (×2) (AA, R6, UM-3) Optical cable (×1) STANDBY/ON POWER POWER AV TV STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM 1 ST+3BEAM 2 3BEAM 3 STEREO 4 MY BEAM SURROUND 5 6 MUSIC 7 MOVIE 8 SPORTS - Yamaha YSP 1100 | Owner's Manual - Page 10
mode (see page 25). Notes • When you turn on the power of this unit, you will hear a click and there will be a 4 to 5-second delay before it can reproduce sound. • In the standby mode, this unit consumes a small amount of power in order to receive infrared-signals from the remote control. 6 En - Yamaha YSP 1100 | Owner's Manual - Page 11
INTRODUCTION Front panel display 12 3 CONTROLS AND FUNCTIONS 4 NIGHT SLEEP PCM DIGITAL PL VOL m ft mS dB 5 1 NIGHT indicator Lights up when one of the night adjust the brightness of the front panel display using the DISPLAY MENU parameters in MANUAL SETUP (see page 70). English 7 En - Yamaha YSP 1100 | Owner's Manual - Page 12
AUX STB RS-232C REMOTE IN DIGITAL IN AUDIO IN SUBWOOFER VIDEO IN VIDEO OUT 1 RS-232C/REMOTE IN terminals These are control expansion terminals for factory use only (see page 23). 2 DVD COAXIAL DIGITAL IN jack Use to connect a DVD player/recorder via a coaxial digital connection (see page 17 - Yamaha YSP 1100 | Owner's Manual - Page 13
the remote control once you set the appropriate remote control codes. See "Controlling other components" on page 82 for details. STANDBY/ON POWER POWER AV TV STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM ST+3BEAM 3BEAM 1 2 3 STEREO MY BEAM SURROUND - Yamaha YSP 1100 | Owner's Manual - Page 14
the setup menu on your TV monitor (see pages 31 and 61). Display the DVD menu. (S:TV/AV) S Operation mode selector Selects the operation mode of this unit. Select YSP when operating this unit and select TV/AV when operating the TV or other AV components set up the appropriate remote control codes - Yamaha YSP 1100 | Owner's Manual - Page 15
location to install the unit using a metal wall bracket, a rack or a stand. Before installing this unit Installing this unit This unit creates surround sound by reflecting projected sound beams off the walls of your listening room. The surround sound effects produced by this unit may not be - Yamaha YSP 1100 | Owner's Manual - Page 16
INSTALLATION ■ Installation examples Example 1 Install this unit as close to the exact center of the wall as possible. Example 2 Install this unit so that the sound beams can be reflected off the walls. Example 3 Install this unit as close to the exact front of your normal listening position. 12 En - Yamaha YSP 1100 | Owner's Manual - Page 17
refer to the installation manual supplied with the optional TV stand. TV This unit TV y Refer to the instructions supplied with the metal bracket for details on how to attach the metal bracket to the wall or how to attach this unit to the metal bracket. ■ Using a stand You can mount your TV on the - Yamaha YSP 1100 | Owner's Manual - Page 18
sure you wipe the surface of the rack, etc. before securing the fasteners. Applying the tape to a dirty or wet surface will weaken the sticking power of the tape, and this unit may fall as a result. 14 En - Yamaha YSP 1100 | Owner's Manual - Page 19
external components such as your TV, DVD player, VCR, digital satellite tuner, cable TV tuner and game console. Further, by connecting a subwoofer to this unit, you can enjoy reinforced low bass sounds. For details on how to connect various types of external components to this unit, see pages - Yamaha YSP 1100 | Owner's Manual - Page 20
adjust the system parameters in SET MENU. ■ Audio connections ■ Video connections Connect the analog audio output jacks of your TV to the Connect the video /AUX STB RS-232C REMOTE IN DIGITAL IN AUDIO IN SUBWOOFER VIDEO IN VIDEO OUT Cables used for audio connections (White) Audio pin - Yamaha YSP 1100 | Owner's Manual - Page 21
DVD COAXIAL AUX TV/STB OPTICAL TV/STB VCR VCR DVD/AUX STB RS-232C REMOTE IN DIGITAL IN AUDIO IN SUBWOOFER VIDEO IN VIDEO OUT Cables used for audio connections (White) Audio pin cable (White) (Red) (Red) Digital audio pin cable (supplied) (Orange) (Orange) Cables used for video - Yamaha YSP 1100 | Owner's Manual - Page 22
Rear panel of this unit COMPONENT COMPONENT DVD COAXIAL AUX TV/STB OPTICAL TV/STB VCR VCR DVD/AUX STB RS-232C REMOTE IN DIGITAL IN AUDIO IN SUBWOOFER VIDEO IN VIDEO OUT Cables used for audio connections (White) Audio pin cable (White) (Red) (Red) Cables used for video - Yamaha YSP 1100 | Owner's Manual - Page 23
TV/STB VCR VCR DVD/AUX STB RS-232C REMOTE IN DIGITAL IN AUDIO IN SUBWOOFER VIDEO IN VIDEO OUT Cables used for audio connections (White) Audio pin cable (White) (Red) Optical cable (Red) Cables used for video connections (Yellow) Video pin cable (Yellow) (Green) (Blue) (Red - Yamaha YSP 1100 | Owner's Manual - Page 24
TV/STB VCR VCR DVD/AUX STB RS-232C REMOTE IN DIGITAL IN AUDIO IN SUBWOOFER VIDEO IN VIDEO OUT Cables used for audio connections (White) Audio pin cable (White) (Red) Optical cable (Red) Cables used for video connections (Yellow) Video pin cable (Yellow) (Green) (Blue) (Red - Yamaha YSP 1100 | Owner's Manual - Page 25
CD player, etc. Optical digital output PREPARATION COMPONENT Rear panel of this unit COMPONENT COMPONENT RS-232C DVD COAXIAL AUX TV/STB OPTICAL REMOTE IN DIGITAL IN TV/STB VCR AUDIO IN VCR SUBWOOFER DVD/AUX STB VIDEO IN VIDEO OUT Cables used for connections Optical cable 21 En - Yamaha YSP 1100 | Owner's Manual - Page 26
is connected to this unit, turn on the power of your subwoofer and then run AUTO SETUP (see page 29) or select SWFR for BASS OUT in SUBWOOFER SET (see page 67). Subwoofer Monaural input Rear panel of this unit COMPONENT COMPONENT COMPONENT RS-232C DVD COAXIAL AUX TV/STB OPTICAL REMOTE IN - Yamaha YSP 1100 | Owner's Manual - Page 27
end of the power supply cable into the AC IN terminal of this unit and then plug the other end into the AC wall outlet. To the AC outlet About the RS-232C/REMOTE IN/IR-OUT terminals The RS-232C, REMOTE IN and IR-OUT terminals do not support normal external component connections. These are - Yamaha YSP 1100 | Owner's Manual - Page 28
• If the memory stored in the remote control is unwantedly erased, insert new batteries and reset the remote control codes again. Notes • Do not spill water or other liquids on the remote control. • Do not drop the remote control. • Do not leave or store the remote control in the following types of - Yamaha YSP 1100 | Owner's Manual - Page 29
on the specific functions of the available remote control buttons for each input source. Operational buttons only when YSP is selected 1 2 3 STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM ST+3BEAM 3BEAM 1 2 3 STEREO MY BEAM SURROUND 4 5 6 MUSIC - Yamaha YSP 1100 | Owner's Manual - Page 30
the OSD. STANDBY/ON POWER POWER AV TV STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM ST+3BEAM 3BEAM 1 2 3 STEREO MY BEAM SURROUND 4 5 6 MUSIC 7 MOVIE 8 SPORTS 9 OFF 0 +10 CH LEVEL MENU 5 Press TV on the remote control to display the OSD of - Yamaha YSP 1100 | Owner's Manual - Page 31
the setup procedure. Run LANGUAGE SETUP. See "CHANGING OSD LANGUAGE" on page 28. USING SET MENU Run AUTO SETUP (IntelliBeam). See "AUTO SETUP ( and adjustments Run MANUAL SETUP. See "MANUAL SETUP" on page 60. y • If you cannot clearly hear a sound beam from a specific channel, adjust settings - Yamaha YSP 1100 | Owner's Manual - Page 32
YSP 2 Press MENU on the remote control. The SET MENU screen appears on your TV. MENU SET MENU . ;MEMORY ;AUTO SETUP ;MANUAL SETUP ;LANGUAGE SETUP SETUP and then press ENTER. The following screen appears on your TV. ENTER ENTER p p p p LANGUAGE SETUP . ENGLISH DEUTSCH Francais ESPANOL - Yamaha YSP 1100 | Owner's Manual - Page 33
only is selected. *2 The sound optimization procedure is skipped if BEAM OPTIMZ only is selected. *3 The subwoofer checking procedure is skipped if BEAM OPTIMZ only is selected. *2 *3 Checking the subwoofer Optimizing the beam delay, frequency and volume Sound optimization SETUP English 29 En - Yamaha YSP 1100 | Owner's Manual - Page 34
is not possible, you can manually fine-tune the sound beam angle and balance the sound beam output levels using MANUAL SETUP (see page 60) once the AUTO SETUP procedure is completed. • If a subwoofer with adjustable volume and crossover/high cut frequency controls is connected to this unit, set the - Yamaha YSP 1100 | Owner's Manual - Page 35
and holding AUTO SETUP on the remote control more than 2 seconds. In this case, this unit performs both of the beam optimization and sound optimization procedures. ■ Assembling the supplied cardboard microphone stand You will find three separate parts (one circular-shaped part and two longitudinal - Yamaha YSP 1100 | Owner's Manual - Page 36
STANDBY/ON on the front panel or on the remote control to turn on the power of this unit. If a subwoofer is connected to this unit, turn on the power of the subwoofer. STANDBY/ON or Front panel Remote control 2 Set the operation mode selector to YSP to switch to the operation mode of this unit - Yamaha YSP 1100 | Owner's Manual - Page 37
and the walls in your listening room? AUTO SETUP PREPARATION & CHECK Please connect the MIC. Please place the MIC at least 1.8m/6ft away from the YSP unit. The This menu takes about 1 minute. SOUND OPTIMZ only (Sound optimization only) Use to optimize the beam delay, volume and quality so that the - Yamaha YSP 1100 | Owner's Manual - Page 38
NOT APPLICABLE'' is displayed even though a subwoofer is connected to this unit, increase the volume level of the subwoofer and run the AUTO SETUP procedure again. • Depending on the environment of your listening room, the beam angle of front left and right, and surround left and right may be set to - Yamaha YSP 1100 | Owner's Manual - Page 39
microphone is firmly connected to this unit and placed in a proper location. If the problem persists, contact the nearest YAMAHA service center for assistance. ERROR E-7 Unexpected error happened. Please re-try. An internal system error occurred. Repeat the AUTO SETUP procedure. See page - 30 - Yamaha YSP 1100 | Owner's Manual - Page 40
SET MENU in the system memory of this unit YSP 4 Press / to select SAVE and then press ENTER. The following screen appears on your TV. ENTER ENTER 2 Press MENU on the remote control. The SET MENU screen appears on your TV. MENU p p SET MENU . ;MEMORY ;AUTO SETUP ;MANUAL SETUP ;LANGUAGE SETUP - Yamaha YSP 1100 | Owner's Manual - Page 41
screen. ENTER 2)MEMORY SAVE MEMORY1 Saving 2 Press MENU on the remote control. The SET MENU screen appears on your TV. MENU p SET MENU . ;MEMORY ;AUTO SETUP ;MANUAL SETUP ;LANGUAGE SETUP [ ]/[ ]:Up/Down [ENTER]:Enter y • The control buttons used for SET MENU are displayed on the bottom of the - Yamaha YSP 1100 | Owner's Manual - Page 42
USING THE SYSTEM MEMORY 4 Press / to select LOAD and then press ENTER. The following The following screen appears on your TV. ENTER ENTER p p p p SET MENU . ;MEMORY ;AUTO SETUP ;MANUAL SETUP ;LANGUAGE SETUP [ ]/[ ]:Up/Down [ENTER]:Enter 7 Press MENU to exit. The SET MENU screen disappears from - Yamaha YSP 1100 | Owner's Manual - Page 43
and then press TV on the remote control to play back a TV program. TV/AV TV YSP INPUT VOLUME + STANDBY/ON STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM ST+3BEAM 3BEAM 1 2 3 STEREO MY BEAM SURROUND 4 5 6 MUSIC 7 MOVIE 8 SPORTS 9 OFF 0 +10 CH - Yamaha YSP 1100 | Owner's Manual - Page 44
DVD player you are using, refer to the owner's manual supplied with the TV and the DVD player. Set the operation mode selector to YSP to switch to the operation mode of this unit and then press AUX on the remote control to play back a component connected to the AUX jack on the rear panel of - Yamaha YSP 1100 | Owner's Manual - Page 45
VOLUME CH TV VOL PLAYBACK INPUT VOLUME + STANDBY/ON VOLUME CH TV VOL MUTE TV INPUT TV MUTE CODE SET 1 Press MUTE on the remote control to mute the sound. AUDIO MUTE ON appears in the front panel display, and the volume level indicator flashes. MUTE BASIC OPERATION MUTE TV INPUT TV MUTE - Yamaha YSP 1100 | Owner's Manual - Page 46
SURROUND SOUND ENJOYING SURROUND SOUND You can enjoy multi channel surround sound by changing the beam mode using the beam mode buttons on the remote control. Select 3 beam, 5 beam and stereo plus 3 beam for multi channel playback. Note When ANGLE TO WALL OR CORNER is set in MANUAL SETUP - Yamaha YSP 1100 | Owner's Manual - Page 47
when the listening position is close to the backside of the wall and the surround left and right beams cannot reflect. Press 3BEAM on the remote control to select the 3 beam. ST+3BEAM 2 3BEAM 3 Note The front left and right sound beams are output directly to the listening position. y You can - Yamaha YSP 1100 | Owner's Manual - Page 48
input mode (AUTO, DTS or ANALOG) by pressing INPUTMODE on the remote control repeatedly (see page 75). • Discs encoded in DTS-ES or Dolby Digital 5.1 EX will be played back in DTS or Dolby Digital. ■ Surround modes and recommended sources Surround mode Dolby Pro Logic Dolby Pro Logic II DTS Neo - Yamaha YSP 1100 | Owner's Manual - Page 49
that you can enjoy a variety of surround sound effects by switching the surround mode. y The surround modes are available only when the CINEMA YSP RETURN 2 Press SURROUND on the remote control repeatedly (or press SURROUND and then press / ) to switch between surround modes. SURROUND 6 or SURROUND - Yamaha YSP 1100 | Owner's Manual - Page 50
throughout the entire surround sound field to give you an expansive feeling. Choices: ON/OFF Default setting: OFF DIMENSION Adjusts the difference in volume between front and surround channels to the volume balance you desire. Control range: -3 (toward the surround direction) to +3 (toward - Yamaha YSP 1100 | Owner's Manual - Page 51
remote control. The normal sounds are output from the front and left channels in the 2-channel stereo. This is ideal for playing back hi-fi sources, such as CDs, and can be used to replace your TV speakers. AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM ST+3BEAM 3BEAM 1 2 3 STEREO MY BEAM SURROUND - Yamaha YSP 1100 | Owner's Manual - Page 52
beam mode, the surround modes (see page 44), the CINEMA DSP programs (see page 50) and the TruBass (see page 57) become ineffective. In addition, no audio is output from the subwoofer connected to this unit. Using auto-adjust function The my beam microphone on the remote control collects the test - Yamaha YSP 1100 | Owner's Manual - Page 53
to YSP to switch to the operation mode of this unit. TV/AV YSP 2 Press MY BEAM on the remote control. MY Control range: L90° to R90° • Press repeatedly to increase the horizontal angle on the left side. • Press repeatedly to increase the horizontal angle on the right side. ENTER PLAYING BACK SOUND - Yamaha YSP 1100 | Owner's Manual - Page 54
y The YAMAHA CINEMA DSP modes are compatible with all Dolby Digital, DTS and Dolby Surround sources. Note Choose a sound field program a live instrument are the multiple reflections from the walls of the room. In addition to making the sound live, these reflections enable the listener to tell where - Yamaha YSP 1100 | Owner's Manual - Page 55
you feel as if you are at an actual jazz or rock concert. This program creates a rich surround effect of a large round concert hall with a great deal of presence, emphasizing the extension of sounds, and lets you feel as if you are seated close to the center of the stage. This program - Yamaha YSP 1100 | Owner's Manual - Page 56
in Dolby Digital, DTS or Dolby Surround. This program clearly reproduces dialog and sound effects, thus creating a broad and expansive cinematic space amid silence. 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 2 Press MOVIE on the remote control to - Yamaha YSP 1100 | Owner's Manual - Page 57
listening room. 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 2 Press SPORTS on the remote control to select the sports sound field program. SPORTS 9 VOL y • There is only one sports sound field program available. • For detailed descriptions of each - Yamaha YSP 1100 | Owner's Manual - Page 58
environment and your preference even more accurately. TV/AV 1 Set the operation mode selector to YSP to YSP switch to the operation mode of this unit. 2 Press OFF on the remote control to turn off the sound field programs. CINEMA DSP OFF is shown in the front panel display. OFF 0 VOL TV - Yamaha YSP 1100 | Owner's Manual - Page 59
SURROUND 4 5 6 MUSIC 7 MOVIE 8 SPORTS 9 OFF 0 +10 CH LEVEL MENU TEST ENTER TV/AV YSP RETURN 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 2 Press VOL MODE on the remote control of-listening for all sounds. • Select TV EQUAL VOL when - Yamaha YSP 1100 | Owner's Manual - Page 60
MODE (Night listening mode/TV volume equal mode) 3 Press / on the remote control to adjust the effect level of compression while NIGHT:CINEMA, NIGHT:MUSIC or TV you press STANDBY/ON on the front panel or on the remote control or if you disconnect the power supply cable from the AC wall outlet. 56 En - Yamaha YSP 1100 | Owner's Manual - Page 61
the presence of a subwoofer. Note The TruBass is not available when the my beam is selected as the beam mode (see page 48). 5BEAM ST+3BEAM 3BEAM 1 2 3 STEREO MY BEAM SURROUND 4 5 6 MUSIC 7 MOVIE 8 SPORTS 9 OFF 0 +10 CH LEVEL MENU 3 Press on the remote control repeatedly to select - Yamaha YSP 1100 | Owner's Manual - Page 62
. Setting the sleep timer Each time you press SLEEP on the remote control, the front panel display changes as shown below. AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM ST+3BEAM 3BEAM 1 2 3 STEREO MY BEAM SURROUND 4 5 6 MUSIC 7 MOVIE 8 SPORTS 9 OFF 0 +10 CH LEVEL MENU TEST ENTER TV - Yamaha YSP 1100 | Owner's Manual - Page 63
is stored in the system memory and automatically restored when you make a new setting next time. y The sleep timer setting can also be deactivated if you press STANDBY/ON on the front panel or on the remote control to set this unit to the standby mode or unplug the power supply cable from the - Yamaha YSP 1100 | Owner's Manual - Page 64
MANUAL SETUP MANUAL SETUP To achieve the best quality surround sound, you can use MANUAL SETUP to fine-tune the listening environment parameters, as well as to make advanced settings for sound signals, sound beams, digital input and the OSD. Change the initial settings (indicated in bold under - Yamaha YSP 1100 | Owner's Manual - Page 65
sound. 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 2 Press MENU on the remote control. The SET MENU screen appears on your TV. MENU p SET MENU . ;MEMORY ;AUTO SETUP ;MANUAL SETUP ;LANGUAGE SETUP [ ]/[ ]:Up/Down [ENTER]:Enter p p MANUAL SETUP - Yamaha YSP 1100 | Owner's Manual - Page 66
various parameters related to the sound beam output. SET MENU → MANUAL SETUP → BEAM MENU 2)BEAM MENU . A)SETTING PARAMETERS B)BEAM ADJUSTMENT C)IMAGE LOCATION [ ]/[ ]:Up/Down [ENTER]:Enter • Select FLAT TO WALL if this unit is installed in parallel with the wall in your listening room. Adjust - Yamaha YSP 1100 | Owner's Manual - Page 67
from the unit MANUAL SETUP INSTALLED HEIGHT (Installed height of this unit) Use to adjust the installed height of this unit. Control range: 0.0 . When using the stereo plus 3 beam as the beam mode, set the surround left and right signals to be output from the front left and right channels. - Yamaha YSP 1100 | Owner's Manual - Page 68
at the listening position at the same time. This menu sets the distance that sound beams travel after being output and reflected off the wall until they arrive at the listening position and adjust the delay applied to the respective channel. The lines in the illustration below indicate the distance - Yamaha YSP 1100 | Owner's Manual - Page 69
points on the walls. The shorter the distance, more the expansion. focal length focal point MANUAL SETUP TREBLE GAIN (Treble gain) Use to adjust the high frequency output level of each channel. y If the reflection point of the front left and right or surround left and right sound beams is a curtain - Yamaha YSP 1100 | Owner's Manual - Page 70
Without adjustment With the front left channel adjusted SOUND MENU Use to manually adjust various parameters related to the sound output. SET MENU → MANUAL SETUP → SOUND MENU 1)SOUND MENU . A)TONE CONTROL B)SUBWOOFER SET C)MUTE LEVEL D)AUDIO DELAY E)ROOM EQ F)DD/DTS Dynamic Range [ ]/[ ]:Up/Down - Yamaha YSP 1100 | Owner's Manual - Page 71
is effective only when this unit decodes Dolby Digital or DTS signals. Choices: -20 to 0 dB DISTANCE (Distance) Select to adjust the distance of the subwoofer from the listening position. Choices: 0.3 to 15.0 m Initial setting: 3.0 m p p p p p MANUAL SETUP ■ MUTE LEVEL (Muting level) Use to adjust - Yamaha YSP 1100 | Owner's Manual - Page 72
p p MANUAL SETUP ■ DD/DTS Dynamic Range (Dynamic range of Dolby Digital and DTS signals) Use to select the amount of dynamic range compression. This setting is effective only when the unit is decoding Dolby Digital and DTS signals. Dynamic range is the difference between the smallest sound that can - Yamaha YSP 1100 | Owner's Manual - Page 73
connected to the DIGITAL INPUT jacks when you turn on the power of this unit. For information on the types of audio signals that can be output by this unit, see "Surround video signals input at the AUX OPTICAL IN jack of this unit. Control range: -6.0 dB to 0.0 dB Initial setting: -3.0 dB • Select - Yamaha YSP 1100 | Owner's Manual - Page 74
procedure. D)INPUT RENAME DVD -> DVD p [ ]/[ ]:Position [ ]/[ ]:Character [ENTER]:Return DISPLAY MENU Use to manually adjust various parameters related to the display. SET MENU → MANUAL SETUP this unit by using the control buttons on the front panel or on the remote control. Choices: -2, -1, OFF - Yamaha YSP 1100 | Owner's Manual - Page 75
METERS to input distances in meters. • Select FEET to input distances in feet. Note If you change this setting, the adjusted beam settings may change. MANUAL SETUP ADVANCED OPERATION English 71 En - Yamaha YSP 1100 | Owner's Manual - Page 76
switch to the operation mode of this unit. TV/AV YSP TEST SWFR Note TEST SWFR is only available when a subwoofer is connected to this unit and SWFR is selected for BASS OUT in SOUND MENU (see page 67). 2 Press TEST on the remote control. TEST FRONT L appears in the front panel display and a test - Yamaha YSP 1100 | Owner's Manual - Page 77
TEST Using the audio output being player back You can also manually adjust the channel levels while playing back an input source such MENU TEST ENTER TV/AV YSP RETURN 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 2 Press CH LEVEL repeatedly - Yamaha YSP 1100 | Owner's Manual - Page 78
ADJUSTING THE AUDIO BALANCE Note SWFR is only available when a subwoofer is connected to this unit and SWFR is selected for BASS OUT in SOUND MENU (see page 66). 3 Press / to adjust channel volumes. ENTER Control range: -10 dB to +10 dB 4 Wait for a few seconds without operating this unit when you - Yamaha YSP 1100 | Owner's Manual - Page 79
most cases. STANDBY/ON POWER POWER AV TV STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 2 Press one of the input selector buttons on the remote control to select the - Yamaha YSP 1100 | Owner's Manual - Page 80
3 Release INPUT on the front panel. Follow the procedure below to enter the system parameters. INPUT INPUT VOLUME + STANDBY/ON CH LEVEL MENU TEST ENTER TV/AV YSP RETURN 1 Press STANDBY/ON on the front panel to turn off the power of this unit. STANDBY/ON Setting the MEMORY PROTECT - Yamaha YSP 1100 | Owner's Manual - Page 81
maximum volume level so that this unit will not output sound beyond the limited volume level. 1 Repeat steps 1 to 3 in "Using the system parameters" on page 76. 2 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP ENTER Control range: MAX, 99 to 01, MIN - Yamaha YSP 1100 | Owner's Manual - Page 82
unit to the standby mode. STANDBY/ON 1 Repeat steps 1 to 3 in "Using the system parameters" on page 76. 2 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 3 Press / on the remote control so that TURN ON VOLUME is shown in the front panel display. The - Yamaha YSP 1100 | Owner's Manual - Page 83
completely resets ALL the parameters in SET MENU. Note After performing the following procedure you must run the AUTO SETUP again to match your surround sound environment. 1 Repeat steps 1 to 3 in "Using the system parameters" on page 76. 2 Set the operation mode selector to YSP to switch to - Yamaha YSP 1100 | Owner's Manual - Page 84
ADJUSTING SYSTEM PARAMETERS 5 Press / to switch between PRESET: RESET and PRESET: CANCEL. ENTER VOL PRESET: RESET VOL PRESET: CANCEL • Select PRESET: RESET to reset all of the current settings. • Select PRESET: CANCEL to cancel the resetting procedure. 6 Press STANDBY/ON on the front panel to set - Yamaha YSP 1100 | Owner's Manual - Page 85
OF REMOTE CONTROL CODES" at the end of this manual. STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP 2 Press the numeric buttons to enter the remote control code while holding down CODE SET. Setting example: YAMAHA DVD input area TV MUTE CODE SET SURROUND 6 While - Yamaha YSP 1100 | Owner's Manual - Page 86
. The control area of the remote control changes to the DVD operation mode. TV/AV TV YSP TV/AV YSP DVD STANDBY/ON POWER POWER AV TV 3 4 6 STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM ST+3BEAM 3BEAM 1 2 3 STEREO MY BEAM SURROUND 4 5 6 MUSIC - Yamaha YSP 1100 | Owner's Manual - Page 87
. The control area of the remote control changes to the STB operation mode. TV/AV YSP VCR TV/AV YSP STB STANDBY/ON POWER POWER AV TV 2 3 STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM ST+3BEAM 3BEAM 1 2 3 STEREO MY BEAM SURROUND 4 5 6 MUSIC - Yamaha YSP 1100 | Owner's Manual - Page 88
CODE SET TV 2 Press MACRO on the remote control while holding down CODE SET. TV MUTE CODE SET While holding MACRO down, press STANDBY/ON POWER POWER AV TV STB VCR DVD AUX TV INPUT1 INPUT2 MACRO TV AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM ST+3BEAM 3BEAM 1 2 3 STEREO MY BEAM SURROUND - Yamaha YSP 1100 | Owner's Manual - Page 89
YSP 2 Press and hold one of the input selector buttons for approximately 2 seconds to select the input source you want to operate macros for. The TV input changes at the same time the input mode changes. STB VCR DVD AUX TV ■ Canceling the macros 1 Press and hold CODE SET on the remote control - Yamaha YSP 1100 | Owner's Manual - Page 90
contact the nearest authorized YAMAHA dealer or service center. ■ General Problem Cause Remedy This unit fails to turn on when STANDBY/ON is pressed, or enters the standby mode soon after the power has been turned on. The power supply cable is not firmly connected to the AC wall outlet or to - Yamaha YSP 1100 | Owner's Manual - Page 91
. subwoofer. Surround sound effects are insubstantial. The listening room is not a regular shape. Install this unit in a square or rectangular shaped room. There is no wall in the path of the sound Try placing a flat object, such as a board, beam. in the path of the sound beam. Dolby Digital - Yamaha YSP 1100 | Owner's Manual - Page 92
component you want to operate. The remote control code was not correctly set. Set the remote control code correctly or try another code for the same manufacturer using the "LIST OF REMOTE CONTROL CODES" at the end of this manual. Even if the remote control code is correctly set, there are some - Yamaha YSP 1100 | Owner's Manual - Page 93
enjoy the depth of sound and natural spatial representation of DTS digital surround in your home. This system produces practically distortion-free 6-channel sound (technically, a left, right and center channels, 2 surround channels, plus an LFE 0.1 channel as a subwoofer, for a total of 5.1channels - Yamaha YSP 1100 | Owner's Manual - Page 94
Neo: 6 44 Dynamic range 68 F R Remote control 9, 24, 25 Remote control code 81 S SET MENU 26 Sleep timer 58 Sound field program 50 Surround mode 44 T Front panel display 7 L LFE 0.1 channel 89 M Test tone 72 TruBass 57 TV macro 84 V Volume mode 55 MANUAL SETUP 60 MEMORY 36, 37 My - Yamaha YSP 1100 | Owner's Manual - Page 95
120 Hz 1 (Subwoofer) VIDEO (1 Vp-p, 75 1 (Composite) COMPONENT VIDEO (Y: 1 Vp-p, 75 Ω PB/PR: 0.5 Vp-p, 75 1 • System Connector Jacks OPTIMIZER MIC 1 (Microphone input) RS-232C 1 (System control) REMOTE IN 1 (System control) IR-OUT 1 (System control) GENERAL • Power supply [U.S.A. and Canada - Yamaha YSP 1100 | Owner's Manual - Page 96
LIST OF REMOTE CONTROL CODES TV ADMIRAL 292, 293, 216 AIWA 294, 276, 283, 284 AKAI 215 VIDECH 297, 242 WARDS 297, 239, 232, 216 YAMAHA 299, 292, 242, 285, 287, 253, 206 ZENITH 216, 261, 271 DVD PLAYER AIWA 648, 649 APEX DIGITAL 652, 653, 654 BYD:SIGN 678, 679 DAEWOO 655 DENON - Yamaha YSP 1100 | Owner's Manual - Page 97
UNIVERSAL VIEWSTAR 769, 772, 773, 774, 775 764, 766, 776, 777, 778, 779, 782 SATELLITE TUNER ECHOSTAR 822 GE 837, 838, 839 GENERAL INSTRUMENT 823 HITACHI 824 HUGHES 843, 844, 845, 846 JVC 822 MAGNAVOX 825 PANASONIC 826, 829 PHILLIPS 825, 843, 844, 845, 846, 847, 848, 849 PRIMESTAR - Yamaha YSP 1100 | Owner's Manual - Page 98
ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN - Yamaha YSP 1100 | Owner's Manual - Page 99
a subwoofer) 8 Power supply cable (supplied) Subwoofer y If a subwoofer is connected to this unit, turn on the 7 power of your subwoofer and then carry out the AUTO SETUP procedure (see the backside) or Monaural input select "SWFR" for "BASS OUT" in "SUBWOOFER SET" (see page 67 in the Owner - Yamaha YSP 1100 | Owner's Manual - Page 100
in the listening room while the AUTO SETUP procedure is in progress. 1 Press STANDBY/ON on the remote control. The power of this unit turns on. STANDBY/ON POWER POWER AV TV If a subwoofer with adjustable volume and crossover/high cut frequency controls is connected to this unit, set the volume
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
 |
 |
YSP-1100
Digital Sound Projector
OWNER’S MANUAL
UAB