Yamaha YSP-4000BL Owner's Manual

Yamaha YSP-4000BL Manual

Get Yamaha YSP-4000BL PDF manuals and user guides View all Yamaha YSP-4000BL manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha YSP-4000BL manual content summary:

  • Yamaha YSP-4000BL | Owner's Manual - Page 1
    UA YSP-4000 Digital Sound ProjectorTM OWNER'S MANUAL
  • Yamaha YSP-4000BL | Owner's Manual - Page 2
    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ■ Explanation of Graphical Symbols
  • Yamaha YSP-4000BL | Owner's Manual - Page 3
    1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting
  • Yamaha YSP-4000BL | Owner's Manual - Page 4
    Yamaha service personnel when any service is needed. The cabinet should never be opened for any reasons. 15 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the power supply cable from the wall outlet. 16 Be sure to read the "Troubleshooting Owner's Manual in
  • Yamaha YSP-4000BL | Owner's Manual - Page 5
    63 Using manual-adjust function 64 Using sound field programs 65 CINEMA DSP programs 67 Using the music enhancer 70 Using the volume mode (Night listening enhancer/ TV volume equal mode 71 Using the sleep timer 72 Displaying the input source information 74 Using the HDMI control feature 75
  • Yamaha YSP-4000BL | Owner's Manual - Page 6
    in the hope that your listening room will give you the same kind of surround sound experience as your local movie theater. Yamaha YSP-4000 Digital Sound Projector challenges this preconception that complicated speaker setup and troublesome wiring go hand-in-hand with the enjoyment of multi-channel
  • Yamaha YSP-4000BL | Owner's Manual - Page 7
    beam angle manually or automatically using the supplied remote control to the maximum of 45°, rightward and leftward. Cinema DSP This unit employs the Cinema DSP technology developed by Yamaha Electronics Corp. that lets you experience movies at home with all the original dramatic sound impact. HDMI
  • Yamaha YSP-4000BL | Owner's Manual - Page 8
    YAMAHA CORPORATION. The " " logo and "Cinema DSP" are registered trademarks of YAMAHA CORPORATION. Manufactured under license from 1 Ltd. Worldwide patents applied for. The " " logo and "Digital Sound Projector Co., Ltd. "HDMI", the "HDMI" logo and "High-Definition Multimedia Interface" are
  • Yamaha YSP-4000BL | Owner's Manual - Page 9
    Change the beam modes and/or CINEMA DSP settings. See "Enjoying surround sound" on page 56. If you want to make additional settings and adjustments 7 Run MANUAL SETUP to fine-tune settings and/or set remote control codes. See "MANUAL SETUP" on page 76 and "Remote control features" on page 103. 5 En
  • Yamaha YSP-4000BL | Owner's Manual - Page 10
    the following parts. Remote control (×1) STANDBY Digital audio pin cable (×1) (Orange) Audio pin cable (×1) MUTE TV INPUT TV MUTE CODE SET CH LEVEL TEST Cardboard microphone stand (×1) (White/Red) (U.S.A. and Canada models) Batteries (×2) (AA, R6, UM-3) Indoor FM antenna (×1) REFERENCE GUIDE
  • Yamaha YSP-4000BL | Owner's Manual - Page 11
    • When you turn on this unit, you will hear a click sound followed by the 4 to 5-second interval before sound reproducing. • In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control or to search for HDMI signals. English 7 En
  • Yamaha YSP-4000BL | Owner's Manual - Page 12
    flashes during the XM preset operation (U.S.A. and Canada models only). 3 CINEMA DSP indicator Lights up when a sound field program is selected (see page 67). 4 PCM indicator Lights up when this unit is reproducing PCM (Pulse Code Modulation) digital audio signals. 5 Decoder indicators Light up when
  • Yamaha YSP-4000BL | Owner's Manual - Page 13
    below shows the rear panel of the U.S.A. and Canada models. (U.S.A. and Canada models) AUX 1 1 2 DVD IN 3 OUT HDMI Controls and functions 4 5 IR-OUT IR-OUT 6 78 9 0 A BC D E COMPONENT FM75 UNBAL. ANTENNA COMPONENT COMPONENT SUBWOOFER SYSTEM CONNECTOR VIDEO OUT STB DVD/AUX 2 VIDEO
  • Yamaha YSP-4000BL | Owner's Manual - Page 14
    Reference Guide). D IR IN terminal This is a control expansion terminal for commercial use only (see page 30). E RS-232C terminal This is a control expansion terminal for commercial use only (see page 30). F SYSTEM CONNECTOR terminal (U.S.A. and Canada models only) Use to connect a Yamaha subwoofer
  • Yamaha YSP-4000BL | Owner's Manual - Page 15
    the remote control used to control this unit. Some buttons marked with an asterisk (*) share the common functions between the YSP and TV/AV operation modes (S). y You can also control other components using the remote control once you set the appropriate remote control codes. See "Controlling other
  • Yamaha YSP-4000BL | Owner's Manual - Page 16
    mode selector Selects the operation mode of this unit. Select YSP when operating this unit and select TV/AV when operating your digital satellite tuner, cable TV tuner, or VCR (see pages 104 and 106). W TV MUTE, CODE SET Mutes the audio output of your TV (see page 104). Sets up remote control
  • Yamaha YSP-4000BL | Owner's Manual - Page 17
    this unit is receiving the Radio Data System (see page 54). 6 SEARCH FM: Switches between automatic and manual tuning (see page 51). 7 Operation mode selector Selects the operation mode of this unit. Select YSP when operating this unit and select TV/AV when operating your TV or other AV components
  • Yamaha YSP-4000BL | Owner's Manual - Page 18
    and functions Remote control (U.S.A. and Canada models) This section describes the functions of the remote control used to control this unit. Some buttons marked with an asterisk (*) share the common functions between the YSP and TV/AV operation modes (S). y You can also control other components
  • Yamaha YSP-4000BL | Owner's Manual - Page 19
    unit. Select YSP when operating this unit and select TV/AV when operating your TV or other AV components. Controls and functions T digital satellite tuner, cable TV tuner, or VCR (see pages 104 and 106). W TV MUTE, CODE SET Mutes the audio output of your TV (see page 104). Sets up remote control
  • Yamaha YSP-4000BL | Owner's Manual - Page 20
    functions of the remote control used to control FM, XM manual tuning (see page 51). XM: Switches between search modes (All Channel Search, Category Search, and Preset Search) (see pages 7 and 8 in the Reference Guide). 7 Operation mode selector Selects the operation mode of this unit. Select YSP
  • Yamaha YSP-4000BL | Owner's Manual - Page 21
    you make a connection over HDMI, we recommend that you make a connection first before installation (see page 22). Before installing this unit This unit creates surround sound by reflecting projected sound beams off the walls of your listening room. The surround sound effects produced by this unit
  • Yamaha YSP-4000BL | Owner's Manual - Page 22
    Installation ■ Installation examples Example 1 Install this unit as close to the exact center of the wall as possible. Example 2 Install this unit so that the sound beams can be reflected off the walls. Example 3 Install this unit as close to the exact front of your normal listening position as
  • Yamaha YSP-4000BL | Owner's Manual - Page 23
    YSP-4000 150 355 24- 7x22 TV 355 150 92 112 730 SPM-K30 (Option) 4- 7 (mm) y Refer to the instructions supplied with the metal bracket for details on how to attach the metal bracket to the wall or how to attach this unit to the metal bracket. ■ Using a stand You can mount to support the
  • Yamaha YSP-4000BL | Owner's Manual - Page 24
    /terminal: For audio input • 2 optical digital input jacks • 2 coaxial digital input jacks • 2 sets of analog input jacks • 1 universal dock terminal (U.S.A., Canada, and Australia models only) For audio/video input • 2 HDMI input jacks For audio output • 1 subwoofer output jack For audio/video
  • Yamaha YSP-4000BL | Owner's Manual - Page 25
    this unit ■ Information on HDMI™ Audio signals Input source Audio signal type DVD video Dolby Digital, DTS, PCM DVD audio 2-channel stereo (up to 96 kHz/24 bit) Blu-ray Disc HD DVD Dolby Digital, DTS, PCM (Orange) (Orange) 3.5 mm stereo mini plug cable 5 Subwoofer pin cable Video OSD
  • Yamaha YSP-4000BL | Owner's Manual - Page 26
    ) is not necessary if your TV has a built-in digital satellite tuner, cable TV tuner, or digital airwave tuner. * A A A HDMI input TV Audio/Video A HDMI cable HDMI output HDMI output DVD player/recorder Digital satellite tuner, cable TV tuner, digital airwave tuner, or game console 22 En
  • Yamaha YSP-4000BL | Owner's Manual - Page 27
    your TV to the TV/STB AUDIO IN jacks on this unit. If your TV has an optical digital output jack, connect the optical digital output jack on your TV to the TV/STB OPTICAL DIGITAL IN jack on this unit. For video connection, connect the video input jack on your TV to
  • Yamaha YSP-4000BL | Owner's Manual - Page 28
    details, refer to the operation manual supplied with your DVD player/recorder. • If your DVD player/recorder does not have a coaxial digital output jack, make an optical digital audio connection instead (see page 28). FM75 UNBAL. ANTENNA COMPONENT COMPONENT SUBWOOFER STB DVD/AUX 2 VIDEO IN
  • Yamaha YSP-4000BL | Owner's Manual - Page 29
    the supplied cable clamp (see page 21). FM75 UNBAL. ANTENNA COMPONENT COMPONENT SUBWOOFER STB DVD/AUX 2 VIDEO IN AUX 1 TV/STB AUX 1 AUDIO built-in digital satellite tuner, cable TV tuner, or digital airwave tuner. Video Video pin cable Component video pin cable Digital satellite tuner or
  • Yamaha YSP-4000BL | Owner's Manual - Page 30
    in the supplied cable clamp (see page 21). FM75 UNBAL. COMPONENT ANTENNA COMPONENT SUBWOOFER STB DVD/AUX 2 VIDEO IN AUX 1 TV/STB AUX 1 AUDIO IN Rear panel of this unit DVD AUX 2 COAXIAL OPTICAL TV/STB AUX 1 DIGITAL IN * * * You can only make either a composite or a component
  • Yamaha YSP-4000BL | Owner's Manual - Page 31
    PREPARATION Connections Connecting a portable audio player Connect the analog audio output jack on your portable audio player to the AUX 3 input jack on the front panel of this unit. Front panel of this unit AUX 3 INTELLIBEAM MIC AUX 3 INPUT VOLUME + STANDBY/ON Analog audio output Portable
  • Yamaha YSP-4000BL | Owner's Manual - Page 32
    IN jack on this unit. If your component does not support optical digital connections, connect the coaxial digital output jack on your component to the AUX 2 COAXIAL DIGITAL IN jack on this unit. If your component does not support any digital connections, connect the analog audio output jacks on your
  • Yamaha YSP-4000BL | Owner's Manual - Page 33
    page 82). When connecting a Yamaha subwoofer equipped with a SYSTEM CONNECTOR terminal, connect it to the SYSTEM CONNECTOR terminal on this unit (U.S.A. and Canada models). If the subwoofer is connected using a system type connection, changing the power mode of this unit controls the power mode of
  • Yamaha YSP-4000BL | Owner's Manual - Page 34
    . FM indoor antenna (supplied) FM75 UNBAL. ANTENNA COMPONENT COMPONENT SUBWOOFER Rear panel of this unit STB DVD/AUX 2 VIDEO IN not support normal external component connections. They are control expansion terminals for commercial use only. Rear panel of this unit (U.S.A. and Canada models)
  • Yamaha YSP-4000BL | Owner's Manual - Page 35
    one end of the AC power supply cable into the AC IN terminal of this unit and then plug the other end into the AC wall outlet. Rear panel of this unit (U.S.A. and Canada models) To the AC wall outlet IR-OUT AC IN PREPARATION English 31 En
  • Yamaha YSP-4000BL | Owner's Manual - Page 36
    (20 ft) 45 INPUT VOLUME + STANDBY/ON 45 Notes • Change all of the batteries if you notice the following conditions: the operation range of the remote control decreases or the transmission indicator does not light up or becomes dim. • Do not use old batteries together with new ones. • Do not use
  • Yamaha YSP-4000BL | Owner's Manual - Page 37
    MEMORY FM/XM CAT (U.S.A. and Canada models) 1 Press STANDBY/ON to turn on the power of this unit. The volume level appears in the front panel display, and the current input source and beam mode are displayed. STANDBY/ON or STANDBY/ON Front panel Remote control VOLUME 30 Current volume level
  • Yamaha YSP-4000BL | Owner's Manual - Page 38
    listening room. Once this is complete, you can enjoy real surround sound while watching TV in the comfort of your own home. 1 STANDBY/ON or STANDBY/ON Front panel Remote control 3 Turn on the power of your TV. 4 Set the operation mode selector to YSP. TV/AV YSP 5 Press MENU. The SET MENU
  • Yamaha YSP-4000BL | Owner's Manual - Page 39
    the settings for the beam mode and the CINEMA DSP. See "Playback" on page 47, "Enjoying surround sound" on page 56, and "Using sound field programs" on page 65. If you want to make additional settings and adjustments Run MANUAL SETUP. See "MANUAL SETUP" on page 76. y • If you cannot clearly hear
  • Yamaha YSP-4000BL | Owner's Manual - Page 40
    that appears in SET MENU of this unit. 1 Set the operation mode selector to YSP. TV/AV YSP 2 Press MENU. The SET MENU screen appears on your TV. MENU p p SET MENU . ;MEMORY ;AUTO SETUP ;MANUAL SETUP ;LANGUAGE SETUP [ ]/[ ]:Up/Down [ENTER]:Enter 4 Press / to select the desired language, and
  • Yamaha YSP-4000BL | Owner's Manual - Page 41
    sound field by reflecting sound beams on the walls of your listening room and by broadening the cohesion of all the channels. Just as you would arrange the speaker or part of SOUND OPTIMZ only is selected. *2 The sound optimization procedure is skipped if BEAM OPTIMZ only is selected. *3 The subwoofer
  • Yamaha YSP-4000BL | Owner's Manual - Page 42
    is not possible, you can manually fine-tune the sound beam angle and balance the sound beam output levels using MANUAL SETUP (see page 76) once the AUTO SETUP procedure is completed. • If a subwoofer with adjustable volume and crossover/high-cut frequency controls is connected to this unit, set
  • Yamaha YSP-4000BL | Owner's Manual - Page 43
    sound optimization procedures. ■ Assembling the supplied cardboard microphone stand You will find three separate parts (one circular part and two longitudinal parts +10 ENHANCER ENTRY MENU CAT/ A-E DISPLAY ENTER TV/AV YSP RETURN VOLUME CH TV VOL (U.S.A. and Canada models) English 39 En
  • Yamaha YSP-4000BL | Owner's Manual - Page 44
    so that you may not obstruct the path of sound beams. • Be advised that it is normal subwoofer. STANDBY/ON or STANDBY/ON Front panel Remote control 2 Set the operation mode selector to YSP. 3 Press MENU. The SET MENU screen appears on your TV. MENU p p SET MENU . ;MEMORY ;AUTO SETUP ;MANUAL
  • Yamaha YSP-4000BL | Owner's Manual - Page 45
    the IntelliBeam microphone and the walls in your listening room? least 1.8m/6ft away from the YSP unit. The MIC should be set one minute. SOUND OPTIMZ only (Sound optimization only) unit. • If you have manually set the beam angle. This proper remedies. Follow the instructions and perform the AUTO
  • Yamaha YSP-4000BL | Owner's Manual - Page 46
    2 SHOW RESULT MEASUREMENT COMPLETE ← Flashes ENVIRONMENT CHECK[FAILED] BEAM MODE :5 BEAM SUBWOOFER :YES [ENTER]:Save set-up. [RETURN]:Do not save set-up. y and then run the procedure again from step 3. AUTO SETUP COMPLETE Your YSP unit may not be set up correctly. We recommend you try again.
  • Yamaha YSP-4000BL | Owner's Manual - Page 47
    Run MANUAL SETUP if the problem is Unexpected control is in front of YSP. The IntelliBeam sound output level is too low. Make sure that the IntelliBeam microphone is firmly connected to this unit and placed in a proper location. If the problem persists, contact the nearest authorized Yamaha service
  • Yamaha YSP-4000BL | Owner's Manual - Page 48
    there are curtains in the path of sound beams, the effectiveness of the sound beams will vary depending on whether the the operation mode selector to YSP. TV/AV YSP 2 Press MENU. The SET MENU screen appears on your TV. MENU SET MENU . ;MEMORY ;AUTO SETUP ;MANUAL SETUP ;LANGUAGE SETUP [ ]/[
  • Yamaha YSP-4000BL | Owner's Manual - Page 49
    of your listening environment. 1 Set the operation mode selector to YSP. TV/AV YSP 2)MEMORY SAVE MEMORY1 Save Now ? Push [ENTER] to Save MENU p SET MENU . ;MEMORY ;AUTO SETUP ;MANUAL SETUP ;LANGUAGE SETUP [ ]/[ ]:Up/Down [ENTER]:Enter y • The control buttons used for SET MENU are displayed at the
  • Yamaha YSP-4000BL | Owner's Manual - Page 50
    to select MEMORY1, MEMORY2, or MEMORY3 and press ENTER. The following screen appears on your TV. ENTER ENTER p p p p SET MENU . ;MEMORY ;AUTO SETUP ;MANUAL SETUP ;LANGUAGE SETUP [ ]/[ ]:Up/Down [ENTER]:Enter 7 Press MENU to exit. The SET MENU screen disappears from your TV. MENU 1)MEMORY LOAD
  • Yamaha YSP-4000BL | Owner's Manual - Page 51
    sound from the components connected to this unit simply by pressing INPUT on the front panel repeatedly or pressing one of the input selector buttons (TV, STB, DVD, AUX1, AUX2, or AUX3) on the remote control CAT/ A-E DISPLAY ENTER TV/AV YSP RETURN (U.S.A. and Canada models) TV/STB AUTO Name of
  • Yamaha YSP-4000BL | Owner's Manual - Page 52
    of the playback source. y For details on your TV and DVD player, refer to the respective owner's manual. 1 Turn on the power of your DVD player. 4 Play back DVD on your DVD player using the supplied remote control. Audio signals from your DVD player are output from this unit. y • You can use the
  • Yamaha YSP-4000BL | Owner's Manual - Page 53
    range: MIN (minimum), 01 to 99, MAX (maximum) VOLUME or VOLUME + Front panel Remote control AUDIO MUTE ON Flashes DVD 5BEAM 2 Press MUTE again (or press VOLUME +/-) to resume the sound output. "AUDIO MUTE OFF" appears temporarily in the front panel display (or the numeric value of the current
  • Yamaha YSP-4000BL | Owner's Manual - Page 54
    YSP, you can only operate the functions described in "Selecting a preset station" (see page 54). Note Orient the connected FM antenna for the best reception. FM controls and functions ■ Remote control FM station. y U.S.A. and Canada models use FM/XM. 2 turned on) and manual tuning (the AUTO
  • Yamaha YSP-4000BL | Owner's Manual - Page 55
    is no interference. 1 Set the operation mode selector to TV/AV. TV/AV YSP 2 Press FM to select FM as the input source. "FM" appears in "FM" (U.S.A. and Canada models only). 3 Press SEARCH repeatedly until the AUTO indicator lights up in the front panel display. SEARCH Manual tuning If the desired
  • Yamaha YSP-4000BL | Owner's Manual - Page 56
    4 Press ENTRY ( / ) to tune into the desired station manually. y • You can also press INPUT on the front panel press FM/XM again to display "FM" (U.S.A. and Canada models only). 3 Press and hold MEMORY for more operation mode selector to TV/AV. TV/AV YSP A1:FM 88.9 MHz Flashes When automatic preset
  • Yamaha YSP-4000BL | Owner's Manual - Page 57
    each) manually. 1 Set the operation mode selector to TV/AV. TV/AV YSP 2 Tune into the desired FM station. See page 51 for tuning instructions. to display the colon. • U.S.A. and Canada models use CAT/A-E . • Even when the operation mode selector is set to YSP, you can select the desired preset group
  • Yamaha YSP-4000BL | Owner's Manual - Page 58
    Canada models use CAT/A-E . • Even when the operation mode selector is set to YSP, you can select the desired preset group by pressing A-E (CAT for U.S.A. and Canada In case of poor reception conditions, tune into the desired station manually (see page 51). • In case the signal strength is weakened
  • Yamaha YSP-4000BL | Owner's Manual - Page 59
    1 Tune into the desired Radio Data System broadcasting station. We recommend automatic preset tuning to tune into the Radio Data System broadcasting stations (see page 52). Note The AUTO PS feature of this unit changes the frequency display to the "PS" mode if the Radio Data System station
  • Yamaha YSP-4000BL | Owner's Manual - Page 60
    sound by changing the beam mode using the beam mode buttons on the remote control. Select 5 Beam, Stereo plus 3 Beam, 3 Beam, or My Surround for multi-channel playback. Notes • When ANGLE TO WALL OR CORNER is set in MANUAL TV/AV YSP RETURN (U.S.A. and Canada models) 5 Beam Outputs sound beams from
  • Yamaha YSP-4000BL | Owner's Manual - Page 61
    sources, surround left and right signals are mixed down and output from the front left and right channels. • The front left and right sound beams are output toward the walls in your listening room. • "SP Pos. Corner!" appears in the front panel display if INSTALLED POSITION is set to ANGLE TO
  • Yamaha YSP-4000BL | Owner's Manual - Page 62
    of the current digital input signal, the input channel indicators in the front panel display light up as follows: Status Indicator ■ Surround modes and recommended sources Surround mode Dolby Pro Logic Dolby Pro Logic II DTS Neo:6 Neural Surround (U.S.A. and Canada models only) - Movie
  • Yamaha YSP-4000BL | Owner's Manual - Page 63
    Set the operation mode selector to YSP. TV/AV YSP SUR. DECODE ENTER Neo:6 Cinema Neo:6 Music neural surround (U.S.A. and Canada models only) PRO LOGIC PLII Movie PLII Music PLII Game Example of the surround mode display in the front panel display when the CINEMA DSP program and the Music Enhancer
  • Yamaha YSP-4000BL | Owner's Manual - Page 64
    ENTRY MENU CAT/ A-E DISPLAY ENTER TV/AV YSP RETURN VOLUME CH TV VOL 4 If you hear sound from your TV speakers, reduce the volume level of your TV until you can no longer hear any audio being output. To reduce the TV volume level, use the remote control supplied with your TV. 5 Press VOLUME
  • Yamaha YSP-4000BL | Owner's Manual - Page 65
    effect. MUSIC 7 OFF 0 MOVIE 8 SPORTS 9 SUR. DECODE +10 ENHANCER ENTRY MENU CAT/ A-E DISPLAY ENTER TV/AV YSP RETURN (U.S.A. and Canada models) 1 Repeat steps 1 and 2 in "Enjoying 2-channel sources in surround sound" on page 59 and select PL II Music or Neo:6 Music. 2 Press / to select the
  • Yamaha YSP-4000BL | Owner's Manual - Page 66
    SOUND Enjoying stereo sound You can enjoy 2-channel and 5-channel stereo playback as the beam modes by pressing STEREO on the remote control. Notes • When you play back Dolby Digital speakers. 1 Set the operation mode selector to YSP. TV/AV YSP 1 Set the operation mode selector to YSP. TV/AV YSP
  • Yamaha YSP-4000BL | Owner's Manual - Page 67
    do not want the sound beams to be reflected on the walls in your listening room DSP programs (see page 65), and TruBass (see page 84) become ineffective. In addition, no audio is output from the subwoofer connected to this unit. Using auto-adjust function The My Beam microphone on the remote control
  • Yamaha YSP-4000BL | Owner's Manual - Page 68
    back sound clearly (My Beam) Using manual-adjust function You can adjust the beam angle manually while playing back an input source. This function is also ideal if the listening position is out of the operation guarantee range of the auto-adjust function. 1 Set the operation mode selector to YSP. TV
  • Yamaha YSP-4000BL | Owner's Manual - Page 69
    channel sources. This unit is also equipped with a Yamaha CINEMA DSP (digital sound field processing) chip containing several sound field programs used to enhance your playback experience. Most of the CINEMA DSP programs are precise digital recreations of actual acoustic environments found in famous
  • Yamaha YSP-4000BL | Owner's Manual - Page 70
    in New York and lets you feel as if you are seated right in front of the stage. This program clearly reproduces dialogs and special sound effects of the latest science fiction films and lets you feel a broad and expansive cinematic space amid silence. This program reproduces the wide and grand
  • Yamaha YSP-4000BL | Owner's Manual - Page 71
    one of the CINEMA DSP program buttons on the remote control. 5BEAM 1 ST+3BEAM 2 3BEAM 3 STEREO 4 MY BEAM 5 MY SUR. 6 MUSIC 7 MOVIE 8 SPORTS 9 OFF SUR. DECODE 0 +10 ENHANCER ENTRY MENU CAT/ A-E DISPLAY ENTER TV/AV YSP RETURN (U.S.A. and Canada models) Using sound field programs
  • Yamaha YSP-4000BL | Owner's Manual - Page 72
    . MOVIE 8 TV/AV YSP 2 Press SPORTS to select the sports CINEMA DSP program. SPORTS 9 3 Check that MOVIE is displayed in the front panel display and then press MOVIE on the remote control repeatedly (or press / on the remote control) to switch between the music sound field programs. MOVIE SPORTS
  • Yamaha YSP-4000BL | Owner's Manual - Page 73
    level of the direct sound so that each CINEMA DSP program can reflect your listening environment and your preference even more accurately. 1 Set the operation mode selector to YSP. DSP LEVEL 0dB 4 Press / to adjust the effect level of the selected CINEMA DSP program. ENTER Control range: -6 dB to
  • Yamaha YSP-4000BL | Owner's Manual - Page 74
    Enhancer of this unit to improve the sound nearest to the original depth and width YSP RETURN VOLUME CH TV VOL (U.S.A. and Canada models) 1 Set the operation mode selector to YSP. TV/AV YSP is not compatible with the CINEMA DSP programs. If a CINEMA DSP program is selected while the Music
  • Yamaha YSP-4000BL | Owner's Manual - Page 75
    CAT/ A-E DISPLAY ENTER TV/AV YSP RETURN (U.S.A. and Canada models) Lights up • Select sounds. • Select TV EQUAL VOLUME when watching TV programs. • Select OFF to turn off the volume mode. 1 Set the operation mode selector to YSP. TV/AV YSP cable from the AC wall outlet. • The volume mode settings
  • Yamaha YSP-4000BL | Owner's Manual - Page 76
    changes as shown below. SLEEP SLEEP 120min SLEEP 90min CAT/ A-E DISPLAY ENTER TV/AV YSP RETURN SLEEP 60min (U.S.A. and Canada models) SLEEP 30min 1 Set the operation mode selector to YSP. TV/AV YSP 2 Press SLEEP repeatedly to set the interval for the sleep timer. Choices: 120min, 90min
  • Yamaha YSP-4000BL | Owner's Manual - Page 77
    ■ Canceling the sleep timer 1 Set the operation mode selector to YSP. TV/AV YSP 2 Press SLEEP repeatedly until "SLEEP OFF" appears in the front panel display. SLEEP SLEEP OFF 3 Wait for a few seconds without operating this unit to confirm
  • Yamaha YSP-4000BL | Owner's Manual - Page 78
    DECODE +10 ENTRY MENU CAT/ A-E DISPLAY ENTER TV/AV YSP RETURN VOLUME CH TV VOL 2 Press DISPLAY. The information on Canada models) D.DGTL:48kHz or 1 Set the operation mode selector to YSP. TV/AV YSP INPUT SIGNAL DOLBY DGTL:48kHz Input signal Indicator Sampling frequency Dolby digital
  • Yamaha YSP-4000BL | Owner's Manual - Page 79
    the HDMI control-compatible component is a Panasonic EZ Sync (for U.S.A. and Canada) or HDMI control feature is activated for your TV (see the owner's manual supplied with your TV). • While you are playing back audio from a non-HDMI component, turning off the power of your TV with the remote control
  • Yamaha YSP-4000BL | Owner's Manual - Page 80
    the parameters in BEAM MENU first before making settings for the parameters in SOUND MENU, INPUT MENU, and DISPLAY MENU. SOUND MENU Use to manually adjust the various parameters related to the sound output. Item TONE CONTROL SUBWOOFER SET MUTE LEVEL AUDIO DELAY ROOM EQ DD/DTS Dynamic Range TruBass
  • Yamaha YSP-4000BL | Owner's Manual - Page 81
    Using MANUAL SETUP Use the remote control to access and adjust each parameter. MUSIC 7 OFF 0 MOVIE 8 SPORTS 9 SUR. DECODE +10 ENHANCER ENTRY MENU CAT/ A-E DISPLAY ENTER TV/AV YSP RETURN VOLUME CH TV VOL (U.S.A. and Canada models) y You can adjust the SET MENU parameters while the unit
  • Yamaha YSP-4000BL | Owner's Manual - Page 82
    SETUP BEAM MENU Use to manually adjust the various parameters related to the sound beam output. SET MENU → MANUAL SETUP → BEAM MENU FLAT TO WALL ANGLE TO WALL OR CORNER p p p p 2)BEAM MENU . A)SETTING PARAMETERS B)BEAM ADJUSTMENT C)IMAGE LOCATION [ ]/[ ]:Up/Down [ENTER]:Enter y You can adjust
  • Yamaha YSP-4000BL | Owner's Manual - Page 83
    WALL OR CORNER if this unit is installed in the corner of your listening room. Adjust the width and length of your listening room as well as the distance of the listening position from this unit. Listening position from the unit MANUAL ) Use to manually adjust the various sound beam settings.
  • Yamaha YSP-4000BL | Owner's Manual - Page 84
    This menu sets the distance that sound beams travel after being output and reflected off the wall until they arrive at the (Vertical angle) Use to adjust the vertical angle of sound beams for each speaker. By altering the beam path, you can optimize sound beam angles. p p Choices: 0.3 m to 24
  • Yamaha YSP-4000BL | Owner's Manual - Page 85
    set near the reflection points on the walls. The shorter the distance, the larger the expansion. MANUAL SETUP TREBLE GAIN (Treble gain) Use surfaces, you can achieve more effective surround sound by increasing the treble level for those sound beams. focal length focal point sweet spot Front
  • Yamaha YSP-4000BL | Owner's Manual - Page 86
    center. Without adjustment With the front right channel adjusted p p p SOUND MENU Use to manually adjust the various parameters related to the sound output. SET MENU → MANUAL SETUP → SOUND MENU 1)SOUND MENU . A)TONE CONTROL B)SUBWOOFER SET C)MUTE LEVEL D)AUDIO DELAY E)ROOM EQ F)DD/DTS Dynamic
  • Yamaha YSP-4000BL | Owner's Manual - Page 87
    signals found in Dolby Digital or DTS sources. Choices: SWFR (Subwoofer), FRONT • Select SWFR if you connect a subwoofer. LFE and low- MOUNTING (Mounting type) Use to enhance medium to low range sounds. Choices: WALL (Wall mount), SHELF (Shelf mount) • Select WALL if this unit is mounted on the wall
  • Yamaha YSP-4000BL | Owner's Manual - Page 88
    MANUAL SETUP ■ DD/DTS Dynamic Range (Dynamic range of Dolby Digital and DTS signals) Use to select the amount of dynamic range compression. This setting is effective only when the unit is decoding Dolby Digital and DTS signals. Dynamic range is the difference between the smallest sound that can be
  • Yamaha YSP-4000BL | Owner's Manual - Page 89
    ASSIGNMENT 1/3 HDMI . HDMI1;;;; AUX1 ( AUX1 ) HDMI2;;;; DVD ( DVD ) p [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return p p MANUAL SETUP ■ INPUT TRIM (Input trim) Use to adjust the input level of the input source. C)INPUT TRIM 1/2 . TV/STB ANALOG;;;-3.0dB DIGITAL;;-3.0dB DVD DIGITAL;;-3.0dB p [ ]/[ ]:Up
  • Yamaha YSP-4000BL | Owner's Manual - Page 90
    p p p p p p p MANUAL SETUP ■ INPUT RENAME (Input rename) Use to HDMI CONTROL [ ]/[ ]:Up/Down [ENTER]:Enter SUPPORT AUDIO (Support audio) Use to select whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack of this unit. Choices: YSP-4000
  • Yamaha YSP-4000BL | Owner's Manual - Page 91
    . MANUAL SETUP HDMI OUT jack. HDMI CONTROL (HDMI control) Use this function to link this unit and an HDMI controlcompatible TV via HDMI. You can turn on or off the power, select the input mode, and adjust the volume level of this unit using the remote control supplied with your HDMI control
  • Yamaha YSP-4000BL | Owner's Manual - Page 92
    is in the standby mode. • Select OFF to disable the HDMI control. The signals input at the HDMI IN jacks are not output at the HDMI OUT jack when this unit is in the standby mode. ■ XM ANTENNA LEVEL (XM antenna level) (U.S.A. and Canada models only) Use to display the current reception level of the
  • Yamaha YSP-4000BL | Owner's Manual - Page 93
    models), FEET (U.S.A. and Canada models) C)UNIT SET METERS FEET p [ ]/[ ]:Select [ENTER]:Return • Select METERS to enter distances in meters. • Select FEET to enter distances in feet. Note If you change this setting, the adjusted sound beam settings may change. MANUAL SETUP 89 En English
  • Yamaha YSP-4000BL | Owner's Manual - Page 94
    TV MUTE CODE SET CH LEVEL TEST (U.S.A. and Canada models) 1 Set the operation mode selector to YSP. TV/AV YSP TEST SUBWOOFER Note "TEST SUBWOOFER" is only available when a subwoofer is connected to this unit and SWFR is selected for BASS OUT in SOUND MENU (see page 83). 4 Press / to adjust the
  • Yamaha YSP-4000BL | Owner's Manual - Page 95
    mode selector to YSP. TV/AV YSP Notes • All also manually adjust the channel levels Canada models) FRONT L +1.0dB CENTER -2.5dB FRONT R +1.0dB SUR.R +2.0dB SUR.L +2.0dB SWFR --dB Note "SWFR" is available only when a subwoofer is connected to this unit and SWFR is selected for BASS OUT in SOUND
  • Yamaha YSP-4000BL | Owner's Manual - Page 96
    Adjusting the audio balance 3 Press / to adjust the channel volume. ENTER Control range: -10.0 dB to +10.0 dB 4 Wait for a few seconds without operating this unit when you have completed your adjustment. Notes • All channel levels cannot
  • Yamaha YSP-4000BL | Owner's Manual - Page 97
    / A-E DISPLAY ENTER TV/AV YSP RETURN (U.S.A. and Canada models) 1 Set the operation mode selector to YSP. TV/AV YSP 3 Press INPUTMODE repeatedly to toggle priority order: 1) HDMI 2) Digital 3) Analog y Use this input mode in most cases. • DTS Selects only digital signals encoded in DTS
  • Yamaha YSP-4000BL | Owner's Manual - Page 98
    MACRO STB TV PRESET/TUNE SEARCH MEMORY FM/XM CAT ENHANCER ENTRY MENU CAT/ A-E DISPLAY ENTER TV/AV YSP RETURN (U.S.A. and Canada models) MEMORY PROTECT 3 Release INPUT on the front panel. INPUT 1 Press STANDBY/ON on the remote control to turn off the power of this unit. STANDBY/ON 94 En
  • Yamaha YSP-4000BL | Owner's Manual - Page 99
    parameters" on page 94. 2 Set the operation mode selector to YSP. TV/AV YSP 3 Confirm that "MEMORY PROTECT" is displayed in the front panel PROTECT: OFF to deactivate the protection feature. 5 Press STANDBY/ON on the remote control to set this unit to the standby mode. STANDBY/ON The new setting
  • Yamaha YSP-4000BL | Owner's Manual - Page 100
    maximum volume level so that this unit will not output sound beyond the limited volume level. 1 Repeat steps 1 to YSP. " TV/AV YSP 3 Press / so that "MAX VOLUME SET" is displayed in the front panel display. Control range: MAX, 99 to 01, MIN Control step: 1 6 Press STANDBY/ON on the remote control
  • Yamaha YSP-4000BL | Owner's Manual - Page 101
    video monitor connected via HDMI (see page 22). YSP. TV/AV YSP ENTER 3 Press / so that "MONITOR CHECK" is displayed in the front panel display. 5 Press / to adjust the initial volume level. ENTER ENTER Control range: MAX, 99 to 01, OFF Control step: 1 6 Press STANDBY/ON on the remote control
  • Yamaha YSP-4000BL | Owner's Manual - Page 102
    mode selector to YSP. TV/AV YSP 3 Press / so that "DEMO MODE" is displayed in the front panel display. MON CHK: SKIP ENTER • Select MON CHK: YES to activate the monitor check function. • Select MON CHK: SKIP to deactivate the monitor check function. 5 Press STANDBY/ON on the remote control to set
  • Yamaha YSP-4000BL | Owner's Manual - Page 103
    YSP. DEMO: ON TV/AV YSP remote control to set this unit to the standby mode. STANDBY/ON ENTER PANEL INPUT KEY The new setting will be activated when you turn on 4 Press ENTER. the power of this unit next time. Press ENTER while playing back sources to test the sound beam. ENTER The sound
  • Yamaha YSP-4000BL | Owner's Manual - Page 104
    parameters" on page 94. 2 Set the operation mode selector to YSP. P.INPUT: ON TV/AV YSP 3 Press / so that "F.PANEL KEY" is displayed in the front PANEL KEY" is automatically set to "ON". 6 Press STANDBY/ON on the remote control to set this unit to the standby mode. F.PANEL KEY STANDBY/ON 4
  • Yamaha YSP-4000BL | Owner's Manual - Page 105
    TV/AV YSP F.PANEL: OFF • Select F.PANEL: ON to enable the front panel keys. • Select F.PANEL: OFF to disable the front panel keys. "P.INPUT" is automatically set to "ON". 3 Press / so that "FACTORY PRESET" is displayed in the front panel display. ENTER 6 Press STANDBY/ON on the remote control to
  • Yamaha YSP-4000BL | Owner's Manual - Page 106
    PRESET:CANCEL • Select PRESET: RESET to reset all of the current settings. • Select PRESET: CANCEL to cancel the resetting procedure. 6 Press STANDBY/ON on the remote control to set this unit to the standby mode. STANDBY/ON The new setting will be activated when you turn on the power of this unit
  • Yamaha YSP-4000BL | Owner's Manual - Page 107
    can be set up for each input area (DVD, AUX1, AUX2, STB, and TV). For a complete list of available remote control codes, refer to "List of remote control codes" at the end of this manual. Transmission indicator AV TV DOCK DVD AUX1 AUX2 AUX3 TV INPUT1 MACRO STB TV PRESET/TUNE SEARCH MEMORY FM
  • Yamaha YSP-4000BL | Owner's Manual - Page 108
    to select TV as the input source. The control area of the remote control changes to the TV operation mode. TV/AV TV YSP 1 STANDBY/ON POWER POWER AV TV DOCK TV. 2 CAT/ A-E DISPLAY ENTER TV/AV YSP RETURN VOLUME CH TV VOL 6 3 MUTE TV INPUT TV MUTE CODE SET CH LEVEL TEST 7 (U.S.A. and
  • Yamaha YSP-4000BL | Owner's Manual - Page 109
    DVD as the input source. The control area of the remote control changes to the DVD operation mode. TV/AV YSP DVD 1 2 STANDBY/ON POWER POWER ENTER TV/AV YSP RETURN VOLUME CH TV VOL MUTE TV INPUT TV MUTE CODE SET (U.S.A. and Canada models) 1 Numeric buttons Enter numeric digits. 2 CH +/-
  • Yamaha YSP-4000BL | Owner's Manual - Page 110
    and press AUX1 to select VCR as the input source. The control area of the remote control changes to the AUX1 operation mode. y This operation is available YSP RETURN VOLUME CH TV VOL 4 MUTE TV INPUT TV MUTE CODE SET CH LEVEL TEST (U.S.A. and Canada models) 1 Numeric buttons Enter numeric digits
  • Yamaha YSP-4000BL | Owner's Manual - Page 111
    DECODE 0 +10 ENHANCER ENTRY MENU CAT/ A-E DISPLAY ENTER TV/AV YSP RETURN VOLUME CH TV VOL Remote control features ■ Setting macros for the TV with the tuning capability 1 Press and (U.S.A. and Canada models) 5 Press ENTER to confirm the macro setting. ENTER ADVANCED OPERATION English
  • Yamaha YSP-4000BL | Owner's Manual - Page 112
    Remote control features ■ Setting macros for the TV without the tuning capability 1 Press and hold CODE SET and press one of the input selector buttons to select
  • Yamaha YSP-4000BL | Owner's Manual - Page 113
    HDCP copy protection standards. Connect the HDMI components that support the HDCP copy protection standards. SUPPORT AUDIO is set to OTHER and HDMI audio signals are not being played back on this unit. Set SUPPORT AUDIO to YSP-4000 in MANUAL SETUP The sound suddenly goes off. The sleep timer
  • Yamaha YSP-4000BL | Owner's Manual - Page 114
    "SUPPORT AUDIO" is set to "YSP-4000". Set "SUPPORT AUDIO" to "OTHER". There is noise interference from digital or highfrequency equipment. This unit is too close to the digital or high- Move this unit farther away from such frequency equipment. equipment. This unit does not output effect sounds
  • Yamaha YSP-4000BL | Owner's Manual - Page 115
    ■ Remote control Troubleshooting Problem Cause Remedy The remote control does not work and/or function properly. Wrong distance or angle. The remote control functions within a maximum range of 6 m (20 ft) and no more than 45 degrees off-axis from the front panel. Direct sunlight or lighting
  • Yamaha YSP-4000BL | Owner's Manual - Page 116
    Troubleshooting ■ FM tuner Problem Cause Remedy FM stereo reception is noisy. The characteristics of FM stereo broadcasts may cause this problem too weak. Use a high-quality directional FM antenna. Use the manual tuning method. Previously preset stations This unit has been disconnected for
  • Yamaha YSP-4000BL | Owner's Manual - Page 117
    localization so that the listener feels an expanded sound and will not tire, even when listening to music or a movie for long time. ■ HDMI HDMI (High-Definition Multimedia Interface) is the first industry-supported, uncompressed, all-digital audio/video interface. Providing an interface between any
  • Yamaha YSP-4000BL | Owner's Manual - Page 118
    by XM Satellite Radio for digital radio broadcast of surround recordings and live events in surround sound. Neural Surround™ employs psychoacoustic bass up to an octave below the physical capabilities of the speaker's driver. SRS TruBass technology takes advantage of a spontaneous tendency
  • Yamaha YSP-4000BL | Owner's Manual - Page 119
    114 Power 33 ■R Rear panel 9 Remote control 11 Remote control code 103 Remote control sensor 32 ■S SET MENU 34 Sleep timer 72 Sound field program 65 Stereo plus 3 Beam 57 Surround mode 58 Surround sound 56 SOUND MENU 82 Sports program 68 Stereo sound 62 System parameter 94 ■T Test
  • Yamaha YSP-4000BL | Owner's Manual - Page 120
    Hz 1 (Subwoofer) VIDEO OUT (1 Vp-p, 75 1 (Composite) COMPONENT VIDEO OUT (Y: 1 Vp-p, 75 Ω PB/PR: 0.5 Vp-p, 75 1 (Component) HDMI OUT 1 • System Connector Jack INTELLIBEAM MIC 1 (Microphone input) RS-232C 1 (System control) SYSTEM CONNECTOR (U.S.A. and Canada models 1 (System control) IR IN
  • Yamaha YSP-4000BL | Owner's Manual - Page 121
    List of remote control codes TV ADMIRAL 292, 293, 216 AIWA 294, 276, 283, 284 215 VIDECH 297, 242 WARDS 297, 239, 232, 216 YAMAHA 299, 292, 242, 285, 287, 253, 206 YAMAJI 298 ZENITH 216, 261, 271 DVD PLAYER AIWA 648, 649 APEX DIGITAL 652, 653, 654 BYD:SIGN 678, 679 DAEWOO 655
  • Yamaha YSP-4000BL | Owner's Manual - Page 122
    RCA 744, 792, 793 SCIENTIFIC ATLANTA 752, 753, 754, 789 SONY 756, 757 TOCOM 755 UNIVERSAL 769, 772, 773, 774, 775 VIEWSTAR 764, 766, 776, 777, 778, 779, 782 SATELLITE TUNER ECHOSTAR 822 GE 837, 838, 839 GENERAL INSTRUMENT 823 HITACHI 824 HUGHES 843, 844, 845, 846 JVC 822
  • Yamaha YSP-4000BL | Owner's Manual - Page 123
    , USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY
  • Yamaha YSP-4000BL | Owner's Manual - Page 124
    Radio Overview This is the Reference Guide for Yamaha YSP-4000 Digital Sound Projector. This guide explains the connections and operations of iPod and XM Satellite Radio (U.S.A. and Canada models only). Operations in this guide use keys on the supplied remote control unless otherwise specified. For
  • Yamaha YSP-4000BL | Owner's Manual - Page 125
    Yamaha iPod universal dock, and use the supplied remote control to operate your iPod. Notes • Only iPod (Click and Wheel), iPod nano, and iPod mini are supported SUBWOOFER AUX 1 TV/STB AUX 1 AUDIO IN DOCK DVD AUX 2 COAXIAL OPTICAL TV/STB AUX 1 DIGITAL /DOCK (U.S.A. and Canada models) or AUX3
  • Yamaha YSP-4000BL | Owner's Manual - Page 126
    remote control with the aid of the OSD (see the owner's manual for information on the OSD). In the OSD, you can browse the song list stored on your iPod. Further, you can change or adjust the settings on your iPod as desired. Such advanced operations cannot be performed on your iPod. TV/AV YSP
  • Yamaha YSP-4000BL | Owner's Manual - Page 127
    (Front panel display settings) in the owner's manual (see page 88). • You can manual (see page 89). • You can view the photos or video clips stored on your iPod in the OSD (some models only). Notes • The YAMAHA the album 4 Name of the song 5 Progress bar 6 Elapsed time 7 Shuffle and repeat icons 8
  • Yamaha YSP-4000BL | Owner's Manual - Page 128
    the XM Satellite Radio broadcasts in multi-channels, resulting in a full surround sound experience. See "Surround modes and recommended sources" in the owner's manual (see page 58). Note The XM Satellite Radio service is unavailable in Alaska and Hawaii. Connecting XM™ Mini-Tuner Home Dock Connect
  • Yamaha YSP-4000BL | Owner's Manual - Page 129
    "I", "O", "S", or "F". Activate your XM Satellite Radio service in the U.S. online at http://www.xmradio.com/ done. For more information or to subscribe in Canada, visit XM on the Web at http:// TV/AV YSP RETURN VOLUME CH TV VOL 1 Set the operation mode selector to TV/AV. TV/AV YSP 2 Press FM
  • Yamaha YSP-4000BL | Owner's Manual - Page 130
    (see page 10). ■ All Channel Search mode 1 Press SEARCH repeatedly to select "ALL CH SEARCH". SEARCH XM™ Satellite Radio tuning (U.S.A. and Canada models only) ■ Category Search mode 1 Press SEARCH repeatedly to select "CAT SEARCH". SEARCH CAT SEARCH 2 Press CAT/A-E ( / ) repeatedly to change the
  • Yamaha YSP-4000BL | Owner's Manual - Page 131
    XM™ Satellite Radio tuning (U.S.A. and Canada models only) ■ Preset Search mode Prior to selecting a preset the preset channel number. -12 123 Notes • To enter a one- or two-digit number, press the corresponding number button(s), and press ENTER to confirm the number. If you do not
  • Yamaha YSP-4000BL | Owner's Manual - Page 132
    XM™ Satellite Radio tuning (U.S.A. and Canada models only) Presetting the XM™ Satellite Radio channels You can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8: 5
  • Yamaha YSP-4000BL | Owner's Manual - Page 133
    "XM Satellite Radio (U.S.A. and Canada models only)" in "Troubleshooting" on page 11. ■ Displaying CHAN :XMU CAT :Rock NAME :Coldplay TITLE :Speed of sound .(Coldplay/Spe) [ ]/[ ]:CHANNEL [ ]/[ ]:CATEGORY in "OSD SET" (OSD settings) in the owner's manual (page 89). • To hold the XM Satellite Radio
  • Yamaha YSP-4000BL | Owner's Manual - Page 134
    operations on this unit. If you experience a problem that is not listed below, or if the instruction below does not help, set this unit to the standby mode, disconnect the power supply cable, and contact the nearest authorized Yamaha dealer or service center. ■ iPod Note In case of a transmission
  • Yamaha YSP-4000BL | Owner's Manual - Page 135
    , USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY
  • Yamaha YSP-4000BL | Owner's Manual - Page 136
    cable (Displays the DVD digital video and the YSP-4000 menu screen on the TV) 2 HDMI cable (Inputs DVD digital audio/video signals to this unit) y Hint If you connect this unit to an HDMI control-compatible TV (except some models) via HDMI, you can use the remote control supplied with your TV to
  • Yamaha YSP-4000BL | Owner's Manual - Page 137
    composition of the corresponding input source. If the sound is output from your TV speakers, mute the volume on your TV. For details about digital audio input signals, see page 58 in the Owner's Manual. 5 Press VOLUME +/- on the remote control to adjust the volume level of this unit. VOLUME
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
YSP-4000
Digital Sound Projector
TM
OWNER’S MANUAL
UA