Yamaha YV-1600A Owner's Manual

Yamaha YV-1600A Manual

Get Yamaha YV-1600A PDF manuals and user guides View all Yamaha YV-1600A manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha YV-1600A manual content summary:

  • Yamaha YV-1600A | Owner's Manual - Page 1
    CONCERT V IBES YV-3910/3710/3700/2700/2700G/1600A/520 Owner's Manual Make sure to read the PRECAUTIONS on page 1.
  • Yamaha YV-1600A | Owner's Manual - Page 2
    Yamaha. If a cart, etc., is used, please observe all safety markings and instructions that accompany the accessory product. SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual this manual carefully and consult your dealer before requesting service. ENVIRONMENTAL ISSUES: Yamaha
  • Yamaha YV-1600A | Owner's Manual - Page 3
    in this manual. Assembly in the wrong order may impair the performance and functionality of the instrument or cause noise. • Make sure to adjust the wire clip positions after assembly. (YV-3910/3710/3700: P. 17) • Height adjustment of the striking surface (YV3910/3710/3700: P. 18, YV-2700/2700G
  • Yamaha YV-1600A | Owner's Manual - Page 4
    : YV-3910/3710/3700/2700/2700G/1600A/520 Frame End (Large) Natural Tone Bars Accidental Tone Bars Controller Fan Belt Frame End (Small) Rail No. 1 Resonators (Natural Tone Side) Leg (Large) Pedal Stay Resonators (Accidental Tone Side) Pedal * The illustration shows model YV-3710
  • Yamaha YV-1600A | Owner's Manual - Page 5
    CONFIRMATION OF PACKING CONTENTS : YV-3700 The shipping carton of your YV-3700 should contain the parts shown below. Audience Side Rail Clamp Posts e Resonators (Natural Tone Side) !1 Rail (4) : Audience Side YAMAHA Logo Posts !2 Leg (Large) !3 Leg (Small) r Resonators (Accidental Tone Side)
  • Yamaha YV-1600A | Owner's Manual - Page 6
    /3710 The shipping carton of your YV-3910/3710 should contain the parts shown below. Before (3) : Audience Side Rail Clamp Posts e Resonators (Natural Tone Side) !0 Rail (4) : Audience Side YAMAHA Logo Posts !1 Leg (Large) !2 Leg (Small) r Resonators (Accidental Tone Side) t Sustain Damper
  • Yamaha YV-1600A | Owner's Manual - Page 7
    -3910/3710 s Dividable Parts and Collapsible Parts (YV-3910/3710 only) The YV-3910's/YV-3710's large parts are designed to either divide or collapse. When the instrument is broken down, its compact size makes it easy to transport and
  • Yamaha YV-1600A | Owner's Manual - Page 8
    ASSEMBLY : YV-3910/3710/3700 For safety, assembly should be performed by at least 2 persons in a location with sufficient space. We recommend to you to assemble the instrument on a soft rug or carpet. z Connect the large and the small leg using the reinforcement stay and pedal stay. * Before
  • Yamaha YV-1600A | Owner's Manual - Page 9
    ASSEMBLY: YV-3910/3710/3700 1-2 q YV-3910/3710 : Insert the pedal stay with its notch facing bolt securely. * The hole next to the notch serves as a reference for the correct insertion position. 1-3 q YV-3910/3710 : Connect the other ends of the pedal stay with the small leg in the same way. Leg (
  • Yamaha YV-1600A | Owner's Manual - Page 10
    Side Align flat surfaces. Flat surface should face player side. 1-2 q YV-3700 : Insert the pedal stay with its notch facing up into the lower joint the upper joint of the large leg and tighten the fixing bolt. 1-4 q YV-3700 : Connect the other ends of both stays with the small leg in the same
  • Yamaha YV-1600A | Owner's Manual - Page 11
    ASSEMBLY: YV-3910/3710/3700 x Insert the rails (1) through (4) into the legs. 2-1 First, insert rail (2). rail clamp and less posts than rail (2). The clamp side facing the audience. Rail (4): With YAMAHA logo. Logo side facing the audience. Post Low Sound Side Name Plate Rail Clamp Audience Side
  • Yamaha YV-1600A | Owner's Manual - Page 12
    ASSEMBLY: YV-3910/3710/3700 c Attach the sustain damper. 3-1 z Turn the fixing bolt (damper arm axle) of the damper arm attachment counterclockwise until the axle has fully disappeared in the
  • Yamaha YV-1600A | Owner's Manual - Page 13
    of the fittings on the bottom surfaces of rails (2) and (3) and insert. q YV-3910/3710 Bottom View OK Damper Spring Stopper Protrusion Rail (2) Protrusion Damper Spring Stopper q YV-3700 Rail (2) Protrusion Damper Spring Stopper Bottom View OK Damper Spring Stopper Protrusion 11
  • Yamaha YV-1600A | Owner's Manual - Page 14
    ASSEMBLY: YV-3910/3710/3700 3-3 z Loosen the center rod fixing bolts to extend the center rod. x Connect the center rod with the fitting of the rod connector by firmly holding
  • Yamaha YV-1600A | Owner's Manual - Page 15
    ASSEMBLY: YV-3910/3710/3700 b Set the tone bars. 5-1 (Refer to the illustration of step 3-3 ) Raise the pedal until the knurled part is fully retracted, and fix the center rod
  • Yamaha YV-1600A | Owner's Manual - Page 16
    ASSEMBLY: YV-3910/3710/3700 n Attach the driver. 6-1 Loosen the fixing bolts at the bottom of rails (2) and (3) on the high sound side, and slide both fittings in the direction of the low sound side. 6-2 Fully insert the driver mount into the support fitting. 6-1 Bottom View 6-2 Support Fitting
  • Yamaha YV-1600A | Owner's Manual - Page 17
    Fixing bolt High Sound Side q YV-3700 Controller mounting pins High Sound Side Controller hunger Controller Controller , Connect the driver with the controller. 8-1 Connect the MOTOR IN terminal of the driver with the MOTOR OUT terminal of the controller using the supplied 8P DIN cable*. To
  • Yamaha YV-1600A | Owner's Manual - Page 18
    ASSEMBLY: YV-3910/3710/3700 . Set the synchro belts (fan belts)*. 9-1 First, wrap the synchro belt around the driver pulley and then carefully slide it over the fan side pulley. * Note For Service Personnel If the belt cannot be mounted because the distance between pulleys is too wide, or the belt
  • Yamaha YV-1600A | Owner's Manual - Page 19
    ASSEMBLY: YV-3910/3710/3700 ⁄0 ADJUSTMENTS 10-1 Pedal Stroke Adjustment Loosen Clip Adjustment For shipment the wire clip is initially set at a low position for packing reasons. For normal use this clip should be adjusted as follows: With the pedal released loosen the fixing bolt of the wire clip
  • Yamaha YV-1600A | Owner's Manual - Page 20
    ASSEMBLY: YV-3910/3710/3700 10-4 Tone Bar Height Adjustment This adjustment should center rod fixing bolts. Loosen the slide leg fixing bolts on the high and low sound sides, while supporting the frame ends by hand. Lift the frame ends to the desired height and then securely tighten each fixing
  • Yamaha YV-1600A | Owner's Manual - Page 21
    BEFORE PLAYING : YV-3910/3710/3700/2700/2700G/1600A/520 s Power Supply Prepare the supplied AC adapter. * Make sure to use the supplied AC adapter. Use of different adapters may cause damage not covered by the warranty. z Connect the small plug of the AC adapter to the DC 12V IN jack
  • Yamaha YV-1600A | Owner's Manual - Page 22
    contact the shop where the instrument was purchased. q Vibes Main Unit y Reinforcement Stay (YV-2700/2700G only) u Pedal Stay (YV-2700/2700G) w Leg (Large) Slide Legs e Leg (Small) Slide Legs (YV-1600A/520) r Resonators (Natural Tone Side) t Resonators (Accidental Tone Side) 20 i AC Adapter
  • Yamaha YV-1600A | Owner's Manual - Page 23
    ASSEMBLY : YV-2700/2700G/1600A/520 For safety, assembly should be performed by at least Slide Leg Fixing Bolt Slide Leg Fixing Bolt Slide Leg Fixing Bolt Leg (Large) * The illustrations show model YV-2700/2700G Leg (Small) 2 Place the main unit bottom side up on the floor. 3 Screw each slide leg
  • Yamaha YV-1600A | Owner's Manual - Page 24
    ASSEMBLY : YV-2700/2700G/1600A/520 4 Place the large leg, small leg, pedal stay and reinforcement stay* so that after assembly each part will be positioned as illustrated. (* YV-1600A/520 is not equipped with a reinforcement stay) Low Sound Side Leg (Large) Reinforcement Stay* Audience Side
  • Yamaha YV-1600A | Owner's Manual - Page 25
    leg slipping. Always make sure that the slide legs are held securely. 9 After fixing the legs, connect the pedal with the sustain damper. q For YV-2700/2700G: z Loosen the center rod fixing bolts to extend the center rod. x Connect the center rod with the fitting of the rod connector by firmly
  • Yamaha YV-1600A | Owner's Manual - Page 26
    them using the supplied 8P DIN cable. (Refer to YV-3910/3710/3700 assembly steps n through , on pages 14 and 15.) 12 Attach the round belt (fan belt)*. Slip the round belt (fan belt) over the fan side pulley first, and then pull it over the flange of the driver pulley. * Note For Service
  • Yamaha YV-1600A | Owner's Manual - Page 27
    ASSEMBLY : YV-2700/2700G/1600A/520 13 Adjust the pedal stroke. (Refer to YV-3910/3710/3700 assembly step 10-1 on page 17 the springs on the low sound side, and then unhook the string from the post.) Support both frame ends by hand (do not touch the metal parts shown in the illustration), and
  • Yamaha YV-1600A | Owner's Manual - Page 28
    300 (Pause-Memory Controller), 25-150 rpm 143 x 82 cm (56-1/4" x 32-1/4") YV-3710: 86-94 cm (33-7/8" x 37") YV-3700: 81-89 cm (31-7/8" x 35") YV-3710: 60 kg (132.3 lbs) YV-3700: 58 kg (127.8 lbs) 4" high q YV-2700 / YV-2700G Range Bars Pitch Drive Unit Dimensions (Length x Width) Height Adjustment
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
CONCERT
VIBES
YV-3910/3710/3700/2700/2700G/1600A/520
Owner’s Manual
Make sure to read the PRECAUTIONS on page 1.