Yamaha YV-520 Owner's Manual

Yamaha YV-520 Manual

Get Yamaha YV-520 PDF manuals and user guides View all Yamaha YV-520 manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha YV-520 manual content summary:

  • Yamaha YV-520 | Owner's Manual - Page 1
    CONCERT V IBES YV-3910/3710/3700/2700/2700G/1600A/520 Owner's Manual Make sure to read the PRECAUTIONS on page 1.
  • Yamaha YV-520 | Owner's Manual - Page 2
    (when the unit is operating as designed) are not covered by the manufacturer's warranty; and are therefore the owners responsibility. Please study this manual carefully and consult your dealer before requesting service. ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe
  • Yamaha YV-520 | Owner's Manual - Page 3
    covered manual YV-2700/2700G/ 1600A/520: P 25) should be performed by AT LEAST 2 PERSONS. • After final adjustment of the legs the fixing screws must be tightened securely to prevent loosening. Looseness may cause the instrument to shift during performance and can also cause noise and other problems
  • Yamaha YV-520 | Owner's Manual - Page 4
    /3710/3700/2700/2700G/1600A/520 Frame End (Large) Natural Tone Bars Accidental Tone Bars Controller Fan Belt Frame End (Small) Rail No. 1 Resonators (Natural Tone Side) Leg (Large) Pedal Stay Resonators (Accidental Tone Side) Pedal * The illustration shows model YV-3710 Slant Shaft Caster
  • Yamaha YV-520 | Owner's Manual - Page 5
    CONFIRMATION OF PACKING CONTENTS : YV-3700 The shipping carton of your YV-3700 should contain the parts shown Audience Side Rail Clamp Posts e Resonators (Natural Tone Side) !1 Rail (4) : Audience Side YAMAHA Logo Posts !2 Leg (Large) !3 Leg (Small) r Resonators (Accidental Tone Side) t
  • Yamaha YV-520 | Owner's Manual - Page 6
    /3710 The shipping carton of your YV-3910/3710 should contain the parts shown below. Before (3) : Audience Side Rail Clamp Posts e Resonators (Natural Tone Side) !0 Rail (4) : Audience Side YAMAHA Logo Posts !1 Leg (Large) !2 Leg (Small) r Resonators (Accidental Tone Side) t Sustain Damper
  • Yamaha YV-520 | Owner's Manual - Page 7
    -3910/3710 s Dividable Parts and Collapsible Parts (YV-3910/3710 only) The YV-3910's/YV-3710's large parts are designed to either divide or collapse. When the instrument is broken down, its compact size makes it easy to transport and
  • Yamaha YV-520 | Owner's Manual - Page 8
    Slide Leg Fixing Bolt Leg (Small) Slide Leg Fixing Bolt Slide Leg Fixing Bolt Slide Leg Fixing Bolt 1-1 q YV-3910/3710 : Place the large leg, small leg, pedal stay (and reinforcement stay : YV-3700) so that after assembly each part will be positioned as illustrated. Low Sound Side Leg (Large
  • Yamaha YV-520 | Owner's Manual - Page 9
    notch with the fixing bolt) and tighten the fixing bolt securely. * The hole next to the notch serves as a reference for the correct insertion position. 1-3 q YV-3910/3710 : Connect the other ends of the pedal stay with the small leg in the same way. Leg (Large) Tighten Pedal Stay Notch Fixing
  • Yamaha YV-520 | Owner's Manual - Page 10
    to the notch serves as a reference for the correct insertion position. 1-3 q YV-3700 : In the same way, insert the reinforcement stay with its notch facing the upper joint of the large leg and tighten the fixing bolt. 1-4 q YV-3700 : Connect the other ends of both stays with the small leg in the
  • Yamaha YV-520 | Owner's Manual - Page 11
    ASSEMBLY: YV-3910/3710/3700 x Insert the rails (1) through (4) into the legs. 2-1 First, insert With rail clamp and less posts than rail (2). The clamp side facing the audience. Rail (4): With YAMAHA logo. Logo side facing the audience. Post Low Sound Side Name Plate Rail Clamp Audience Side High
  • Yamaha YV-520 | Owner's Manual - Page 12
    ASSEMBLY: YV-3910/3710/3700 c Attach the sustain damper. 3-1 z Turn the fixing bolt (damper arm axle) of the damper arm attachment counterclockwise until the axle has fully
  • Yamaha YV-520 | Owner's Manual - Page 13
    of the fittings on the bottom surfaces of rails (2) and (3) and insert. q YV-3910/3710 Bottom View OK Damper Spring Stopper Protrusion Rail (2) Protrusion Damper Spring Stopper q YV-3700 Rail (2) Protrusion Damper Spring Stopper Bottom View OK Damper Spring Stopper Protrusion 11
  • Yamaha YV-520 | Owner's Manual - Page 14
    ASSEMBLY: YV-3910/3710/3700 3-3 z Loosen the center rod fixing bolts to extend the center rod. x Connect the center rod with the fitting of the rod connector
  • Yamaha YV-520 | Owner's Manual - Page 15
    ASSEMBLY: YV-3910/3710/3700 b Set the tone bars. 5-1 (Refer to the illustration of step 3-3 ) Raise the pedal until the knurled part is fully retracted, and fix
  • Yamaha YV-520 | Owner's Manual - Page 16
    ASSEMBLY: YV-3910/3710/3700 n Attach the driver. 6-1 Loosen the fixing bolts at the bottom of rails (2) and (3) on the high sound side, and slide both fittings in the direction of the low sound side. 6-2 Fully insert the driver mount into the support fitting. 6-1 Bottom View 6-2 Support Fitting
  • Yamaha YV-520 | Owner's Manual - Page 17
    out the controller hanger and hang the controller on the hanger. Return the controller hanger to its proper position and tighten the fixing bolt. q YV-3700 : There are two controller mounting pins on the high sound side of rail (1). Align the two holes in the controller mounts with these pins
  • Yamaha YV-520 | Owner's Manual - Page 18
    ASSEMBLY: YV-3910/3710/3700 . Set the synchro belts (fan belts)*. 9-1 First, wrap the synchro belt around the driver pulley and then carefully slide it over the fan side pulley. * Note For Service Personnel If the belt cannot be mounted because the distance between pulleys is too wide, or the belt
  • Yamaha YV-520 | Owner's Manual - Page 19
    ASSEMBLY: YV-3910/3710/3700 ⁄0 ADJUSTMENTS 10-1 Pedal Stroke Adjustment Loosen the center rod fixing bolts to adjust the protruding length of the center rod to the
  • Yamaha YV-520 | Owner's Manual - Page 20
    ASSEMBLY: YV-3910/3710/3700 10-4 Tone Bar Height Adjustment This adjustment the center rod fixing bolts. Loosen the slide leg fixing bolts on the high and low sound sides, while supporting the frame ends by hand. Lift the frame ends to the desired height and then securely tighten each fixing bolt
  • Yamaha YV-520 | Owner's Manual - Page 21
    BEFORE PLAYING : YV-3910/3710/3700/2700/2700G/1600A/520 s Power Supply Prepare the supplied AC adapter. * Make sure to use the supplied AC adapter. Use of different adapters may cause damage not covered by the warranty. z Connect the small plug of the AC adapter to the DC 12V IN jack on the
  • Yamaha YV-520 | Owner's Manual - Page 22
    the shop where the instrument was purchased. q Vibes Main Unit y Reinforcement Stay (YV-2700/2700G only) u Pedal Stay (YV-2700/2700G) w Leg (Large) Slide Legs e Leg (Small) Slide Legs (YV-1600A/520) r Resonators (Natural Tone Side) t Resonators (Accidental Tone Side) 20 i AC Adapter o Round
  • Yamaha YV-520 | Owner's Manual - Page 23
    ASSEMBLY : YV-2700/2700G/1600A/520 For safety, assembly should be performed by at least 2 persons in Leg Fixing Bolt Slide Leg Fixing Bolt Slide Leg Fixing Bolt Leg (Large) * The illustrations show model YV-2700/2700G Leg (Small) 2 Place the main unit bottom side up on the floor. 3 Screw each
  • Yamaha YV-520 | Owner's Manual - Page 24
    Place the large leg, small leg, pedal stay and reinforcement stay* so that after assembly each part will be positioned as illustrated. (* YV-1600A/520 is not equipped with a reinforcement stay) Low Sound Side Leg (Large) Reinforcement Stay* Audience Side Pedal Pedal Stay Leg (Small) High Sound
  • Yamaha YV-520 | Owner's Manual - Page 25
    ASSEMBLY : YV-2700/2700G/1600A/520 8 Connect the slide legs with the legs. Align the legs slide legs are held securely. 9 After fixing the legs, connect the pedal with the sustain damper. q For YV-2700/2700G: z Loosen the center rod fixing bolts to extend the center rod. x Connect the center rod
  • Yamaha YV-520 | Owner's Manual - Page 26
    and then pull it over the flange of the driver pulley. * Note For Service Personnel If the belt cannot be mounted because the distance between the pulleys is too following spare part may be ordered: Model YV-2700/2700G YV-1600A/520 Part No. W5 128041 W5 128070 Part Name Fan Belt Fan Belt
  • Yamaha YV-520 | Owner's Manual - Page 27
    ASSEMBLY : YV-2700/2700G/1600A/520 13 Adjust the pedal stroke. (Refer to YV-3910/3710/3700 assembly step 10-1 on disengage the springs on the low sound side, and then unhook the string from the post.) Support both frame ends by hand (do not touch the metal parts shown in the illustration), and
  • Yamaha YV-520 | Owner's Manual - Page 28
    442 Hz YVM-200 (Pause Controller), 25-150 rpm 124 x 74 cm (48-7/8" x 29-1/8") 80-88 cm (31-1/2" x 34-5/8") 38 kg (83.8 lbs) q YV-520 Range Bars Pitch Drive Unit Dimensions (Length x Width) Height Adjustment Weight f-f3, 3 Octaves Aluminum Alloy A = 442 Hz YVM-100 (Pause Controller), 25-150 rpm 106
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
CONCERT
VIBES
YV-3910/3710/3700/2700/2700G/1600A/520
Owner’s Manual
Make sure to read the PRECAUTIONS on page 1.