Zanussi ZUNN18FS1 User Manual
Zanussi ZUNN18FS1 Manual
 |
View all Zanussi ZUNN18FS1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Zanussi ZUNN18FS1 manual content summary:
- Zanussi ZUNN18FS1 | User Manual - Page 1
User Manual GETTING STARTED? EASY. ZUNN18FS1 EN User Manual Freezer - Zanussi ZUNN18FS1 | User Manual - Page 2
VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage - Zanussi ZUNN18FS1 | User Manual - Page 3
. • If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. SAFETY INSTRUCTIONS INSTALLATION WARNING! Only a qualified person must install this appliance. • Remove all the packaging. • Do not - Zanussi ZUNN18FS1 | User Manual - Page 4
components (e.g. mains plug, mains cable, compressor). Contact the Authorised Service Centre or an electrician to change the electrical components. • The Do not freeze again food that has been thawed. • Follow the storage instructions on the packaging of frozen food. • Wrap the food in any food - Zanussi ZUNN18FS1 | User Manual - Page 5
not cause damage to the part of the cooling unit that is near the heat exchanger. WARNING! Refer to Safety chapters. WARNING! Refer to installation instruction document to install your appliance. WARNING! Fix the appliance in accordance with installation - Zanussi ZUNN18FS1 | User Manual - Page 6
D1 D2 D3 DIMENSIONS W1 90° W3 W2 A H1 B Overall dimensions ¹ H1 mm 1772 W1 mm 548 D1 mm 549 ¹ the height, width and depth of the appliance without the handle and feet Space required in use ² H2 (A+B) mm W2 mm D2 mm A mm 1816 548 551 1780 Space required in use ² B mm 36 - Zanussi ZUNN18FS1 | User Manual - Page 7
range. If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Authorised Service Centre. It must be possible to disconnect the appliance from the mains power supply. The plug must therefore be easily accessible - Zanussi ZUNN18FS1 | User Manual - Page 8
cm2 CONTROL PANEL CAUTION! Refer to the installation instructions for the installation. DOOR REVERSIBILITY Please refer to the separate document with instructions on installation and door reversal. CAUTION! At regulation". If "dEMo" appears on the display, refer to "Troubleshooting" . 8 - Zanussi ZUNN18FS1 | User Manual - Page 9
SWITCHING OFF 1. Press the appliance ON/OFF for 3 seconds. The display switches off. 2. Disconnect the mains plug from the power socket. TEMPERATURE REGULATION Set the temperature of the appliance by pressing the temperature regulators. Default recommended set temperature is: • -18°C for the freezer - Zanussi ZUNN18FS1 | User Manual - Page 10
The alarm stops after closing the door. During the alarm, the sound can be muted by pressing any button. DAILY USE If you do not press any button, the sound switches off automatically after around one hour to avoid disturbing. FREEZING FRESH FOOD The freezer compartment is suitable for freezing - Zanussi ZUNN18FS1 | User Manual - Page 11
• The colder the temperature setting, the higher the energy consumption. • Ensure a good ventilation. Do not cover the ventilation grilles or holes. • Make sure that food products inside the appliance allow air circulation through dedicated holes in the rear interior of the appliance. HINTS FOR - Zanussi ZUNN18FS1 | User Manual - Page 12
appliance are not suitable for washing in a dishwasher. PERIODIC CLEANING The equipment has to be cleaned regularly: TROUBLESHOOTING WARNING! Refer to Safety chapters. Shelf life (months) 2 - 3 4 - 6 12 3 - 4 1 - 2 9 - 12 6 - 12 4 - 6 6 - 9 1 - 2 1 - 2 2 - 3 1. Clean the inside and accessories with - Zanussi ZUNN18FS1 | User Manual - Page 13
IF... Problem Possible is no voltage in the mains socket. The appliance is not supported properly. The cabinet has been recently switched on. The temperature in the is normal, no error has occurred. Refer to installation instructions. Wait a few seconds between closing and re-opening of the door. - Zanussi ZUNN18FS1 | User Manual - Page 14
Problem Possible cause Solution Water flows on the floor. Temperature cannot be set chapter. Attach the melting water outlet to the evaporative tray. Switch off "FastFreeze function" manually, or wait until the function deactivates automatically to set the temperature. Refer to "FastFreeze - Zanussi ZUNN18FS1 | User Manual - Page 15
numbers on the temperature display. Temperature sensor problem. Contact the nearest Authorized Service Centre (the cooling system will continue to Authorized Service Centre. CLOSING THE DOOR 1. Clean the door gaskets. NOISES 2. If necessary, adjust the door. Refer to installation instructions. 3. - Zanussi ZUNN18FS1 | User Manual - Page 16
to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance. It is also possible to find the same information in EPREL using the link https://eprel.ec - Zanussi ZUNN18FS1 | User Manual - Page 17
- Zanussi ZUNN18FS1 | User Manual - Page 18
- Zanussi ZUNN18FS1 | User Manual - Page 19
- Zanussi ZUNN18FS1 | User Manual - Page 20
222377518-B-132020 WWW.ZANUSSI.COM/SHOP
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
GETTING
STARTED?
EASY.
User Manual
ZUNN18FS1
EN
User Manual
Freezer