Zanussi ZWC1301 Product Manaul

Zanussi ZWC1301 Manual

Zanussi ZWC1301 manual content summary:

  • Zanussi ZWC1301 | Product Manaul - Page 1
    EN User manual ZWC 1301
  • Zanussi ZWC1301 | Product Manaul - Page 2
    . • Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum. • Do not use your washing machine to wash articles with whalebones, material without hems or torn material. www.zanussi.com
  • Zanussi ZWC1301 | Product Manaul - Page 3
    Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced people may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts. Installation • This appliance is heavy. Care should be taken when
  • Zanussi ZWC1301 | Product Manaul - Page 4
    front Machine rear 2 1 1 2 3 3 4 1 Detergent dispenser drawer 2 Control panel 3 Door opening handle 4 Adjustable feet (front) Detergent dispenser drawer 4 1 Transit locking devices 2 Drain hose 3 Electrical lead 4 Inlet hose Compartment for powder or liquid detergent used for main wash. If
  • Zanussi ZWC1301 | Product Manaul - Page 5
    Pause 8h Delay Start 4h 2h Washing End Door 1300 Spin Drain 900 Rinses Mini 30 700 Wool spun at a speed different from the one proposed by the appliance or select "Rinse Hold" or "No spin" position. 3 , cancel the programme, switch the machine on/off. • Programme selector dial zanussi.com 5
  • Zanussi ZWC1301 | Product Manaul - Page 6
    appliance has started, the remaining time is shown by the corresponding indicator light. The light Washing illuminates when the machine is performing the washing is only drained. Time Saving 9 Daily Short programme for lightly soiled white-/coloured and synthetic laundry. The washing time will be
  • Zanussi ZWC1301 | Product Manaul - Page 7
    electrical and water connections comply with the installation instructions. Important! Remove any material from the drum. Important! We recommend you to run a wash programme without any load, to clear any Daily On position the programme is reset and the machine is switched OFF. www.zanussi.com 7
  • Zanussi ZWC1301 | Product Manaul - Page 8
    washing machine DRAIN or SPIN programme. Start the programme by pressing button 6 To start the selected programme, press this button; the corresponding pilot light stops flashing and remains lit. On programme progress display the pilot lights Washing and Door illuminate to indicate that the appliance
  • Zanussi ZWC1301 | Product Manaul - Page 9
    Leave the door open to prevent the formation of mildew and unpleasant smells. Sorting out the laundry Follow the wash code symbols on each garment label and the manufacturer's washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. www.zanussi.com 9
  • Zanussi ZWC1301 | Product Manaul - Page 10
    bearing the label «pure new wool, machine washable, non-shrink» Before loading the laundry Never wash whites and coloureds together. Whites may lose their «whiteness» in the wash. New coloured items may run in the first wash; they should therefore be washed separately the first time. Make sure
  • Zanussi ZWC1301 | Product Manaul - Page 11
    and additives Good washing results also depend washing temperature and degree of soiling. All commonly available washing machine detergents may be used in this appliance drawer before starting the wash programme. Prewash detergent appliance instructions. When the degree of hardness is soft,
  • Zanussi ZWC1301 | Product Manaul - Page 12
    code symbols Energetic wash Delicate wash Max. wash temperature 95°C Max. wash temperature 60°C Max. wash temperature 40°C Max. wash temperature 30°C Hand wash Do not wash at all Bleaching Bleach in cold water Do not Flat On the line hanger Tumble dry tumble dry 12 www.zanussi.com
  • Zanussi ZWC1301 | Product Manaul - Page 13
    White and coloured cotton (heavily and normally soiled cotton items) SPIN REDUCTION/ RINSE HOLD/NO SPIN QUICK/DAILY PREWASH EXTRA RINSE DELAY START White fabrics with «hand washing» care symbol. SPIN REDUCTION/ RINSE HOLD/NO SPIN DELAY START Washing programme for machine washable wool as well
  • Zanussi ZWC1301 | Product Manaul - Page 14
    with the Rinse Hold option selected. Draining of water Max Load 3 kg SPIN Separate spin for hand washed garments and after programmes with the Rinse powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This 14 will
  • Zanussi ZWC1301 | Product Manaul - Page 15
    the water level in the gully's (drain's) water tap. • Select the programme "Drain" and let it run until it is finished. • Turn the programme selector to position. When you intend to start the machine up again, make sure that the room temperature is above 0 °C. The appliance is only to be used and
  • Zanussi ZWC1301 | Product Manaul - Page 16
    draining. • 4 flashes: door open. Once the problem has been eliminated, press the button START to restart the programme. If after all checks, the problem persists, contact your local Service Centre. Problem The machine does not start: The machine does not fill: The machine to be washed immediately,
  • Zanussi ZWC1301 | Product Manaul - Page 17
    the load manually and then select the spinning programme. Machines based on modern technology operate very economically using very little water without affecting performance. If you are unable to identify or solve the prob- lem, contact our service centre. Before tele- www.zanussi.com 17
  • Zanussi ZWC1301 | Product Manaul - Page 18
    of your machine: the Service Centre will require this information. Mod Prod. No Ser. No Technical data Dimensions Electrical connection 0.45 Synthetics 40 °C 1,5 0.5 Delicates 40 °C 1,5 0.5 Wool/Hand wash 30 °C 1 0.3 Standard cotton programmes Standard 60 °C cotton 3 0.59
  • Zanussi ZWC1301 | Product Manaul - Page 19
    . chine and then lay the machine carefully rear side down on them. Make sure that no hoses are crushed in the process. Return machine to it's upright position and remove the power supply cable and the draining and inlet hose from the hose holders on the rear of the appliance. www.zanussi.com 19
  • Zanussi ZWC1301 | Product Manaul - Page 20
    the instruction booklet, which can be found inside the drum. Positioning Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or furniture. Level the washing machine by
  • Zanussi ZWC1301 | Product Manaul - Page 21
    machine is permanently plumbed in, hook the end of the hose into a standpipe installed for the purpose. The standpipe must have an internal diameter of at least 40 mm (1 1/2") in order that there is an air gap between the drain the inner edge of the appliance door. The appliance is supplied with a 13
  • Zanussi ZWC1301 | Product Manaul - Page 22
    the appliance power supply cable need to be replaced, this must be carried out by our Service Force Centre. Note! When the appliance is laundry may be washed with- out prewashing in order to save detergent, water and time (the environment is protected too!). • The machine works more economically
  • Zanussi ZWC1301 | Product Manaul - Page 23
    www.zanussi.com 23
  • Zanussi ZWC1301 | Product Manaul - Page 24
    192987441-A-142012 www.zanussi.com/shop
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

EN
User manual
ZWC 1301