Zanussi ZWT71201WA Product Manaul

Zanussi ZWT71201WA Manual

Get Zanussi ZWT71201WA PDF manuals and user guides View all Zanussi ZWT71201WA manuals
Add to My Manuals
Save this manual to your list of manuals

Zanussi ZWT71201WA manual content summary:

  • Zanussi ZWT71201WA | Product Manaul - Page 1
    EN User manual Washer Dryer ZWT 71201 WA
  • Zanussi ZWT71201WA | Product Manaul - Page 2
    Contents Safety information 2 Safety instructions 3 Product description 5 Control panel 6 Washing programmes 9 Drying Programmes 11 Helpful hints and tips 11 First use 13 Personalisation 13 Daily Use 14 Safety information Use - Drying 16 Care and cleaning 18 What to do if 20 Technical
  • Zanussi ZWT71201WA | Product Manaul - Page 3
    instruction supplied with the appliance. • Make sure that the floor where you install the appliance is flat, stable, heat resistant and clean. • Do not install the appliance where the appliance door the appliance power supply cable need to be replaced, this must be carried out by our Service Centre.
  • Zanussi ZWT71201WA | Product Manaul - Page 4
    have been used for cleaning. • Make sure that no gas lighters or matches have been left in the pockets of the clothing. • Only dry fabrics which are applicable to dry in the tumble dryer. Follow the instructions on the fabric label. • Do not dry not washed items in the appliance. • If you have
  • Zanussi ZWT71201WA | Product Manaul - Page 5
    in the appliance. 1 Detergent dispenser drawer 2 Control panel 3 Door opening handle 4 Rating plate 5 Drain pump 6 Adjustable feet 1 2 3 4 5 6 Child safety Make sure that children or pets do not climb into the drum. To prevent children and pets becoming trapped inside the drum this machine
  • Zanussi ZWT71201WA | Product Manaul - Page 6
    by relevant numbers on the following pages. 1 23 456 7 8 1 Programme selector dial 2 SPIN reduction button 3 OPTION button 4 EXTRA RINSE button 5 DRYING TIME button 6 10 9 6 EASY IRON button 7 START/PAUSE button 8 DELAY START button 9 DOOR LOCKED pilot light 10 Display www.zanussi.com
  • Zanussi ZWT71201WA | Product Manaul - Page 7
    light The pilot light 9 illuminates when the programme starts and indicates if the door can be opened: • light on: the door cannot be opened. The machine is working or has stopped with water left in the tub. • light off: the door can be opened. The programme is finished or the water has been emptied
  • Zanussi ZWT71201WA | Product Manaul - Page 8
    the event of operating problems, some alarm codes can be displayed, for example (see paragraph «What to do if...»). • Incorrect option selection If an option which is not compatible with the set wash programme is selected, the message Err is displayed at the bottom of the display for a few seconds
  • Zanussi ZWT71201WA | Product Manaul - Page 9
    SPIN RINSE HOLD ECO SUPER QUICK EXTRA RINSE EASY IRON Synthetics Cottons with prewash 9-10-11-12 60°- Cold Main wash - Rinses Short spin at 900 rpm Max. load 3 kg - Reduced load 1,5 kg 1) Synthetic or mixed RINSE SPIN RINSE HOLD EASY IRON Delicates Detergent Compartment 3) www.zanussi.com 9
  • Zanussi ZWT71201WA | Product Manaul - Page 10
    Drying programme for synthetic items 22-Rinses Rinses Long spin at maximum speed Max. load 7 kg With this programme it is possible to rinse and spin cotton garments which have been washed by hand. The machine performs 3 rinses, followed by a final long spin. The spin speed can be reduced. 23-Drain
  • Zanussi ZWT71201WA | Product Manaul - Page 11
    washing load by two equal parts and drying with DRYING TIME each of them. Helpful hints and tips Sorting out the laundry Follow the wash code symbols on each garment label and the manufacturer's washing instructions any belts or long tapes. Remove persistent stains before washing. zanussi.com 11
  • Zanussi ZWT71201WA | Product Manaul - Page 12
    always the manufacturer's instructions. When the degree of hardness is soft, readjust the quantity of the detergent. Preparing the drying cycle As a dryer, the appliance works on the condensation principle. Therefore, the water tap must be open and the drain hose must drain water into a sink
  • Zanussi ZWT71201WA | Product Manaul - Page 13
    is completed, use either a fabric softener when you are washing the laundry or a fabric conditioner specifically for tumble dryers. • Garments padded with foam-rubber or materials similar to foam-rubber must not be machine dried; they represent a fire hazard. • Also, fabrics containing residue of
  • Zanussi ZWT71201WA | Product Manaul - Page 14
    appliance. This function remains enabled also when the washing machine is not working. There are two different ways to set this option: 1. Before pressing button 7: it will be impossible to start the machine . Close the door. Make sure that no laundry stays between the seal and the door. There is
  • Zanussi ZWT71201WA | Product Manaul - Page 15
    the draining programme. Altering an option or a running programme It is possible to change some options before the programme carries them out. Before you make any change, you must pause the washing machine by pressing button 7. Changing a running programme is possible only by resetting it. Turn the
  • Zanussi ZWT71201WA | Product Manaul - Page 16
    . Turn the programme selector dial to to switch the machine off. Remove the laundry from the drum and carefully check that the drum is empty. If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells. Drying
  • Zanussi ZWT71201WA | Product Manaul - Page 17
    when they are washed the first time. • To clean the filter. • Perform one or more rinse cycles to wash the drum between the washing and drying of fabrics with different colors. • After the drying phase, thoroughly clean the empty drum, the gasket and the door with a wet rag. www.zanussi.com 17
  • Zanussi ZWT71201WA | Product Manaul - Page 18
    machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits. External cleaning Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly. Cleaning
  • Zanussi ZWT71201WA | Product Manaul - Page 19
    the pump by inserting it correctly into the special guides. Screw the pump cover firmly by turning it clockwise. tightened so as to stop leaks and young children being able to remove it. Cleaning the water inlet filters Important! If the appliance doesn't fill, takes long to fill with water, the
  • Zanussi ZWT71201WA | Product Manaul - Page 20
    blinks, one of the following alarm codes appears on the display and some acoustic signals sound every 20 seconds to indicate that the machine is not working: • : problem with the water supply. • : problem with the water draining. • : door open. Once the problem has been eliminated, press the
  • Zanussi ZWT71201WA | Product Manaul - Page 21
    filter are blocked. • Clean the water inlet filters. (See "Cleaning the water inlet filters" for more details). The door is not properly closed. • Close the door firmly. The drain hose is squashed or kinked. • Check the drain hose connection. The drain filter is clogged. • Clean the drain filter
  • Zanussi ZWT71201WA | Product Manaul - Page 22
    washing cycle. The door lock has not been released. • Wait until the pilot light 9 goes off. There is water in the drum. • Select drain or spin programme to empty out the water. The transit bolts and packing have not been removed. • Check the correct installation of the appliance. The support feet
  • Zanussi ZWT71201WA | Product Manaul - Page 23
    time has not been selected. • Select the drying time. The water tap is not turned on. • Open the water tap. The drain filter is clogged. • Clean the drain filter. The machine is overloaded. • Reduce the laundry load. The selected drying time or the drying programme was not suitable for the laundry
  • Zanussi ZWT71201WA | Product Manaul - Page 24
    power - Fuse Water Supply Pressure Maximum Load Maximum Dry Load Spin Speed Information on the electrical connection is given on the rating plate, on the inner edge of the appliance door of 49 the programmes, please refer to the display on the control 67 panel. Synthetics 40° 0.55 42
  • Zanussi ZWT71201WA | Product Manaul - Page 25
    the power supply cable and the hose from the hose holders on the rear of the appliance. Level the washing machine instruction booklet. Positioning Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine
  • Zanussi ZWT71201WA | Product Manaul - Page 26
    machine drum. 35° 45° Warning! Installation should comply with local water authority and building regulations' requirements. The appliance must be connected to a cold water supply. A minimum water pressure of 0.05 MPa (0.5 bar) is required for safe operation of the appliance the appliance. drain
  • Zanussi ZWT71201WA | Product Manaul - Page 27
    to a sewage works for treatment before being discharged safely into a river. It is essential that these appliances are not connected WASHING MACHINE DISHWASHER SURFACE WATER DRAINS & SEWERS UNTREATED DISCHARGE RIVER FOUL DRAIN FOUL SEWERS SEWAGE TREATMENT WORKS TREATED DISCHARGE RIVER www.zanussi
  • Zanussi ZWT71201WA | Product Manaul - Page 28
    in This appliance has been designed to be built into the kitchen furniture. The recess should have the dimensions shown in picture A. 600 min. 560 596 555 min. 820 75 60 170 100 A 176,5 416 818 Caution! Do not remove the screw 8! Preparation and assembly of the door The machine is
  • Zanussi ZWT71201WA | Product Manaul - Page 29
    the hole depends on the adjacent furniture's dimensions. The required dimensions are given in the picture C. The hinges will be fixed to the door by means of screws for wood (2-Fig. B) supplied with the appliance. • c) Mounting the door Fix the hinges (1) to the machine by means of the M 5x15 screws
  • Zanussi ZWT71201WA | Product Manaul - Page 30
    front of the machine's feet, this will provide additional security. If required an additional door magnet, part number 1242394-00/3 and disc, part number 1242393-00/5 are available from spare parts. Drill four fixing strip of beading to be fitted in front of the appliance feet. 30 www.zanussi.com
  • Zanussi ZWT71201WA | Product Manaul - Page 31
    appliance power supply cable need to be replaced, this MUST be carried out by a Service Centre. The power supply cable must be easily accessible after installing the machine washed without prewashing in order to save detergent, water and time (the environment is protected too!). • The machine works
  • Zanussi ZWT71201WA | Product Manaul - Page 32
    132927931-A-462012 www.zanussi.com/shop
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
EN
User manual
Washer Dryer
ZWT 71201 WA