Zenith SL-5408-WH User Guide
Zenith SL-5408-WH - Heathco, Llc - Motion Scrty Floodlight Manual
 |
UPC - 016963540811
View all Zenith SL-5408-WH manuals
Add to My Manuals
Save this manual to your list of manuals |
Zenith SL-5408-WH manual content summary:
- Zenith SL-5408-WH | User Guide - Page 1
OPERATION Motion Sensor Light Control As an ENERGY STAR® Partner, Heath®/Zenith has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. This product is ENERGY STAR® compliant when used with 120 Watt bulbs. Model SL-5408 Mode: Test Auto Manual On-Time 5 Seconds 1, - Zenith SL-5408-WH | User Guide - Page 2
. For eave mount only: ❒ Rotate the sensor head towards the clamp screw joint. Control Switch Mount the Light Control ❒ Align the light control cover plate and the junction box holes. Secure with the mounting screws. ❒ If not installed on a weatherproof box or if an adaptor plate (not included - Zenith SL-5408-WH | User Guide - Page 3
Secure the sensor head by tightening the clamp screw. Do not overtighten the screw. ❒ Set the amount of TIME you Aim Sensor Higher for Long Coverage want the lights to stay on after motion Hz Operating Modes. . . . . TEST, AUTO and MANUAL MODE Time Delay 1, 5, 10 minutes Range Adjustable 60 ft. - Zenith SL-5408-WH | User Guide - Page 4
conditions). 4. Light may be leaking through the floodlamp reflectors. (Replace the lamps with new high quality PAR 38 lamps). Technical Service Please call 1-800-858-8501 (English speaking only) for assistance before returning product to store. If you experience a problem, follow this guide. You - Zenith SL-5408-WH | User Guide - Page 5
Heath®/Zenith ha determinado que este producto cumple con las pautas de ENERGY STAR® con respecto a eficiencia de energía. Este producto está en conformidad con ENERGY STAR® cuando se usa con focos de 120 vatios. Modalidad: Prueba Autom. Manual 5 1 TEST Modelo SL-5408 Para AUTOMATICO: Caracterí - Zenith SL-5408-WH | User Guide - Page 6
INSTALACION CONECTE EL CONTROL DE LUZ Para una fácil instalación escoja una luz con un interruptor de pared. Para un mejor funcionamiento, instale el aparato a casi 2,4 m del suelo. ❒ Perfore los agujeros que se necesiten para montar la placa de atrás a la caja de empalmes. ❒ Apague la energía en - Zenith SL-5408-WH | User Guide - Page 7
vatios máximo por cada portalámparas]. Requisitos de potencia . . . . . 120 V ca, 60 Hz Modos de operación PRUEBA,AUTOMATICO, y MODO MANUAL Retardo de Tiempo 1, 5 ó 10 minutos Alcance Ajustable HeathCo LLC se reserva el derecho de descontinuar productos y de cambiar especificaciones a cualquier - Zenith SL-5408-WH | User Guide - Page 8
. (Reposicione el detector). 3. El control de luz está en la Modo Manual. (Cámbiela a Automática). La luz se prende 1. El calor o la a: HeathCo LLC, P.O. Box 90004, Bowling Green, KY 42102-9004 ATTN: Technical Service (Servicio Técnico) * Si se llama al Servicio Técnico, por favor tener lista - Zenith SL-5408-WH | User Guide - Page 9
de mouvement En tant que partenaire ENERGY STAR®, Heath®/Zenith a déterminé que ce produit satisfait aux directives d'efficacité énergétique ENERGY STAR®. Ce produit est conforme à ENERGY STAR® lorsqu'il est utilisé avec des ampoules de 120 watts. Modèle SL-5408 Mode: Temps en circuit : En fonction - Zenith SL-5408-WH | User Guide - Page 10
INSTALLATION Pour faciliter l'installation, choisir un appareil d'éclairage devant être remplacé et qui est déjà commandé par un interrupteur. Pour assurer un rendement maximal, monter l'appareil d'éclairage environ 2,4 mètres au-dessus du sol. ❒ Percez les trous nécessaires au montage de la plaque - Zenith SL-5408-WH | User Guide - Page 11
détection Jusqu'à 110° Charge électrique Jusqu'à deux ampoules in- candescentes, pour un maximum de 300 W [maximum de 150 W par support]. Alimentation électrique . . . 120 V CA, 60 Hz Modes de fonctionnement Essai,automatiqueetpriorité manuelle Délais 1, 5 et 10 minutes Portée Réglable HeathCo - Zenith SL-5408-WH | User Guide - Page 12
de l'aide avant de retourner l'article au magasin. En cas de problème, suivez ce guide. Vous pouvez aussi visiter notre site Web à www.hzsupport.com. Si le problème persiste, composez* le 1 800 858-8501 (service en anglais seulement), entre 7 h 30 et 16 h 30, HNC, du lundi au vendredi. Vous pouvez
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
© 2007 HeathCo LLC
595-5292-19
Motion Sensor Light
Control
Model SL-5408
Features
• Turns on lighting when motion is detected.
• Automatically turns lighting off.
•
Photocell keeps the lighting off during daylight hours.
Requirements
• The light control requires 120-volts AC.
• If you want to use Manual Mode, the control must be
wired through a switch.
•
Some codes require installation by a qualified
electrician.
• This product is intended for use with a junction box
marked for use in wet locations.
• The backplate has knockouts so the sensor can be
mounted on most junction boxes.
• In some applications a universal adaptor plate may
be needed. Adaptors are available at home centers
and electrical supply stores.
Cover
Plate
Light Control
Lamp Holders
Sensor
2 Wire
Connectors
Gasket
4 Mounting
Screws (2 sizes)
This package includes:
OPERATION
* resets to Auto Mode at dawn.
Note:
When first turned on wait about 1
1
/
2
minutes for
the circuitry to calibrate.
MANUAL MODE
ON-TIME
10 5 1
TEST
10 5 1
TEST
ON-TIME
TEST
... back on.
AUTO
1 Second OFF
then...
Put the ON-TIME switch in the 1, 5,
or 10 minute position.
Put the ON-TIME switch on the bottom
of the sensor in the TEST position.
Manual mode only works at night
because daylight returns the sensor
to AUTO.
Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.
Manual mode works only with the
ON-TIME switch in the 1, 5, or 10
position.
Move ON-TIME Switch to
1, 5, or 10 minutes
Mode Switching Summary
Flip light switch off
for one second then
back on*
MANUAL MODE
AUTO
TEST
* If you get confused while switching modes, turn the
power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.
As an ENERGY STAR
®
Partner, Heath
®
/Zenith
has determined that this product meets the EN-
ERGY STAR
®
guidelines for energy efficiency.
This product is ENERGY STAR
®
compliant
when used with 120 Watt bulbs.
Mode:
On-Time
Works:
Day Night
Test
5 Seconds
x
x
Auto
1, 5, or 10 Min
x
Manual
Until Dawn*
x