ZyXEL GS1910-48 User Guide

ZyXEL GS1910-48 Manual

Get ZyXEL GS1910-48 PDF manuals and user guides View all ZyXEL GS1910-48 manuals
Add to My Manuals
Save this manual to your list of manuals

ZyXEL GS1910-48 manual content summary:

  • ZyXEL GS1910-48 | User Guide - Page 1
    GS1910/XGS1910 Series GbE Smart Managed Switch Version 1.00 Edition 1, 01/2013 Quick Start Guide User's Guide Default Login Details IP Address http://192.168.1.1 User Name admin Passwordwww.zyxel.com 1234 Copyright © 2013 ZyXEL Communications Corporation
  • ZyXEL GS1910-48 | User Guide - Page 2
    operating system. Every effort has been made to ensure that the information in this manual is accurate. Related Documentation • Web Configurator Online Help Click the help icon in any screen for help in configuring that screen and supplementary information. 2 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 3
    Console Port ...20 3.2 Rear Panel ...20 3.2.1 Power Connector ...21 3.3 LEDs ...22 Chapter 4 The Web Configurator ...25 4.1 Introduction ...25 4.2 System Login ...25 4.3 The Web Configurator Layout ...26 4.3.1 Change Your Password ...32 4.4 Switch Lockout ...32 GS1910/XGS1910 Series User's Guide 3
  • ZyXEL GS1910-48 | User Guide - Page 4
    Control List (ACL) for Packets Filtering 63 5.13 How to Reset the Switch via the Console Port 66 Chapter 6 Troubleshooting...69 6.1 Power, Hardware Connections, and LEDs 69 6.2 Switch Access and Login ...70 Appendix A Legal Information...73 Index ...75 4 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 5
    This chapter introduces the main features and applications of the Switch. 1.1 Introduction Your Switch is a Gigabit Ethernet (GbE) switch with 20, 44 or 48 10/100/1000 Mbps Ethernet ports. The GS1910-24, GS1910-24HP, XGS1910-24 or XGS1910-48 also has four GbE dual personality interfaces. A dual
  • ZyXEL GS1910-48 | User Guide - Page 6
    can be used if for example, it is cheaper to use multiple lower-speed links than to under-utilize a high-speed, but more costly, single-port link. Figure 2 High Performance Switching 10 Gbps Branch Trunk HQ 6 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 7
    Tag-based VLAN Example Ports in the same VLAN group share the same frame broadcast domain, thus increasing network performance by reducing broadcast traffic. VLAN groups can be modified at any time by adding, moving or changing ports without any re-cabling. GS1910/XGS1910 Series User's Guide 7
  • ZyXEL GS1910-48 | User Guide - Page 8
    Switch using a (supported) web browser. • SNMP. The device can be monitored and/or managed by an SNMP manager. 1.3 Good Habits for Managing the Switch Do the following things regularly to make the Switch more secure and to manage the Switch more effectively. 8 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 9
    crashes. If you forget your password, you will have to reset the Switch to its factory default settings. If you backed up an earlier configuration file, you would not have to totally re-configure the Switch. You could simply restore your last configuration. GS1910/XGS1910 Series User's Guide 9
  • ZyXEL GS1910-48 | User Guide - Page 10
    Chapter 1 Getting to Know Your Switch 10 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 11
    the adhesive backing from the rubber feet. 5 Attach the rubber feet to each corner on the bottom of the Switch. These rubber feet help protect the Switch from shock or vibration and ensure space between devices when stacking. Figure 5 Attaching Rubber Feet GS1910/XGS1910 Series User's Guide 11
  • ZyXEL GS1910-48 | User Guide - Page 12
    the unit. 2.2.2 Attaching the Mounting Brackets to the Switch 1 Position a mounting bracket on one side of the Switch, lining up the four screw holes on the bracket with the screw holes on the side of the Switch. Figure 6 Attaching the Mounting Brackets 12 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 13
    Switch. 4 You may now mount the Switch on a rack. Proceed to the next section. 2.2.3 Mounting the Switch on a Rack 1 Position a mounting bracket (that is already attached to the Switch holes on the side of the rack. Figure 7 Mounting the Switch on a Rack 2 Using a #2 Philips screwdriver, install the
  • ZyXEL GS1910-48 | User Guide - Page 14
    Chapter 2 Hardware Installation and Connection 14 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 15
    Console Port RJ-45 Ethernet Ports Figure 9 Front Panel: GS1910-24HP 10/100/1000 Mbps RJ-45 PoE Ports 10/100/1000 Mbps RJ-45 PoE / SFP Dual Personality Interfaces Console Port Figure 10 Front Panel: GS1910-48 10/100/1000 Mbps RJ-45 Ethernet Ports GS1910/XGS1910 Series User's Guide SFP
  • ZyXEL GS1910-48 | User Guide - Page 16
    100/1000 Mbps RJ-45 Ethernet Ports DESCRIPTION Connect these ports to a computer, a hub, an Ethernet switch or router. 10/100/1000 Mbps RJ-45 PoE Ports (GS191024HP and GS1910-48HP only) Connect these ports to a computer, a hub, an Ethernet switch or router. 16 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 17
    or crossover Ethernet cable. 3.1.1.1 Default Ethernet Settings The factory default negotiation settings for the Ethernet ports on the Switch are: • Speed: Auto • Duplex: Auto • Flow control: Off • Dual Personality Interface: Fiber-optic module first GS1910/XGS1910 Series User's Guide 17
  • ZyXEL GS1910-48 | User Guide - Page 18
    1000BaseT port will be disabled. Note: Connect the 1000Base-T RJ-45 port only supports data rates of 10 Gbps. A transceiver is a single unit that houses a transmitter and a receiver. Use a transceiver to connect a fiberoptic cable to the Switch. The Switch GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 19
    Example 2 Press the transceiver firmly until it clicks into place. 3 The Switch automatically detects the installed transceiver. Check the LEDs to verify that it is transceiver's latch (latch styles vary). Figure 16 Opening the Transceiver's Latch Example GS1910/XGS1910 Series User's Guide 19
  • ZyXEL GS1910-48 | User Guide - Page 20
    of the Switch. The rear panel contains a connector for the power receptacle. The GS1910-48 and GS1910-48HP also have a console port on the rear panel. The XGS1910-48 has one console port and two SFP+ slots on the rear panel. Figure 18 Rear Panel: GS1910-24 20 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 21
    Figure 19 Rear Panel: GS1910-24HP Figure 20 Front Panel: GS1910-48 Figure 21 Front Panel: GS1910-48HP Figure 22 Front Panel: XGS1910-24 Figure 23 Front Panel: XGS1910-48 Chapter 3 Hardware Overview 3.2.1 Power Connector Make sure you are using the correct power source as shown on the panel and
  • ZyXEL GS1910-48 | User Guide - Page 22
    On Off STACK (XGS191 0-24 and XGS1910 -48 only) Green Amber On On Blinking PWR SYS Green Green Off On Off Blinking On Off ALM Red On Off 10/100/1000 Mbps RJ-45 Ports LNK/ACT Green Blinking Amber On Blinking On Off PoE Green On (GS1910- 24HP and GS1910- Amber On 48HP only
  • ZyXEL GS1910-48 | User Guide - Page 23
    /receiving to/from a 100 Mbps Ethernet network. The link to a 100 Mbps Ethernet network is up. The link to an Ethernet network is down. The port has a successful connection. The port is receiving or transmitting data. This link is disconnected. GS1910/XGS1910 Series User's Guide 23
  • ZyXEL GS1910-48 | User Guide - Page 24
    Chapter 3 Hardware Overview 24 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 25
    by default). • Java permissions (enabled by default). 4.2 System Login 1 Start your web browser. 2 Type "http://" and the IP address of the Switch (for example, the default management IP address is 192.168.1.1) in the Location or Address field. Press [ENTER]. GS1910/XGS1910 Series User's Guide 25
  • ZyXEL GS1910-48 | User Guide - Page 26
    4 The Web Configurator 3 The login screen appears. The default username is admin and associated default password is 1234. Figure 24 Web Configurator: Login 4 Click OK to view the first web configurator screen. 4.3 The Web Configurator Layout The Port State Overview screen is the first screen that
  • ZyXEL GS1910-48 | User Guide - Page 27
    the Switch gets the time and date. Log This link takes you to screens where you can setup a system log server. Power Reduction EEE This link takes you to a screen where you can enable EEE (Energy Efficient Ethernet) standard on a port to help reduce power consumption. GS1910/XGS1910 Series
  • ZyXEL GS1910-48 | User Guide - Page 28
    . VLANs VLAN Membership This link takes you to a screen where you can configure and view 802.1Q VLAN parameters for the Switch. Ports This link takes you to a screen where you can configure the static VLAN (IEEE 802.1Q) settings on a port. Private VLANs 28 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 29
    VLANs on the Switch. This screen is not available on the XGS1910-24 or XGS1910-48. Port Isolation This link takes you to a screen where you can enable port isolation on ports in a private VLAN or IEEE 802.1Q tagged VLAN to prevent communication between ports in the same VLAN. VCL MAC-based VLAN
  • ZyXEL GS1910-48 | User Guide - Page 30
    performance data about an individual port on the Switch. Security Access Management Statistics This link takes you packet statistics on a port. MVR Statistics This link takes you to a screen where you can view Multicast VLAN Registration (MVR) statistics. GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 31
    reset the Switch back to the factory defaults. This link takes you to a screen where you can upload firmware to the Switch. This link takes you to a screen where you can switch to use a second firmware image if available. Configuration Backup Upload This screen is not available on the XGS1910-24
  • ZyXEL GS1910-48 | User Guide - Page 32
    management VLAN (default is VLAN 1). 2 Disable all ports. 3 Misconfigure the text configuration file. 4 Forget the password and/or IP address. 5 Prevent all services from accessing the Switch. 6 Change a service port an online help description of that screen. 32 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 33
    to Configure Access Control List (ACL) for Packets Filtering • How to Reset the Switch via the Console Port 5.1 How to Change Switch Management IP Address The default management IP address of the Switch is 192.168.1.1. You can configure the IP address to be in the same subnet as your network or have
  • ZyXEL GS1910-48 | User Guide - Page 34
    your computer to the Switch's port which is in VLAN1 (the default management VLAN). 2 Open your web browser and enter 192.168.1.1 (the default management IP address) in the address log in to the Switch and manage the privilege levels for login accounts. 34 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 35
    the admin account. 2 Click Configuration > Security > Switch > Users in the navigation panel. Click Add New User to create a new login account. 3 Specify the user name, password and privilege level of the login account. 4 Click Save to apply your changes. GS1910/XGS1910 Series User's Guide 35
  • ZyXEL GS1910-48 | User Guide - Page 36
    firmware or resetting to the factory defaults. To change the access privilege level for each feature group, go to Configuration > Security > Switch > Privilege Levels. 5.3 How to Manage Save Configuration. 2 Click Save to display the File Download screen. 36 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 37
    file to your computer. 5.3.2 Restoring a Configuration File If you want to upload a previously saved configuration file from your computer to the Switch, go to Maintenance > Configuration > Upload. Select the *.xml file from its path and click Upload. GS1910/XGS1910 Series User's Guide 37
  • ZyXEL GS1910-48 | User Guide - Page 38
    that are members of the VID (except the ingress port itself), thus confining the broadcast to a specific domain. By default, all ports on the Switch are in VLAN 1. In this example, you want to configure port 1 as a member of VLAN 2. Figure 28 VLAN Example 38 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 39
    port 1 to be a permanent member of the VLAN. 5 Click Save to save the settings to the Switch. 5.4.1 Setting Port VID Use PVID to add a tag to incoming untagged frames received on that port so that the frames are forwarded to the VLAN group that the tag defines. GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 40
    VLAN tags before sending or leave the TX Tag field at Untag_pvid to have the Switch remove a frame's VLAN tag when the frame's VLAN ID is the same as the PVID of the port on which the frame is transmitted. 4 click Save to save your changes back to the Switch 40 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 41
    to Set Up a Guest VLAN with IEEE 802.1x Authentication All ports on the Switch are in VLAN 1 by default. Say you enable IEEE 802.1x authentication on ports 1 to 8. Clients that connect to these ports should provide the correct user name and password in order to access the ports. You want to assign
  • ZyXEL GS1910-48 | User Guide - Page 42
    and Guest VLAN Follow the steps below to enable port authentication to validate access to ports 1~8 to clients based on a RADIUS server. 1 Click Configuration > Security > Network > NAS. Select Enabled in the Mode field to activate IEEE 802.1x authentication on the Switch. 42 GS1910/XGS1910 Series
  • ZyXEL GS1910-48 | User Guide - Page 43
    that attach to port 1, 2 or 3 and fail to authenticate with the RADIUS server now should be in VLAN 200 and can access the Internet via the Internet access gateway connected to port 10 which is also in VLAN 200, but cannot communicate with devices in VLAN 1. GS1910/XGS1910 Series User's Guide 43
  • ZyXEL GS1910-48 | User Guide - Page 44
    uplink port in the same VLAN. You use private VLAN to do port isolation in a VLAN instead of assigning each port to a separate VLAN and creating a different IP routing domain for each individual port. By default, all ports on the Switch are in VLAN 1 and private VLAN 1. An isolated port is a port on
  • ZyXEL GS1910-48 | User Guide - Page 45
    or default gateway. 5.7 How to Use IP Source Guard and DHCP Snooping to Prevent Spoofed Traffic IP source guard uses a binding table to allow or block IP traffic in your network. When the Switch receives an IP packet, it looks up the appropriate MAC address, VLAN ID, IP address, and port number
  • ZyXEL GS1910-48 | User Guide - Page 46
    PORT TRUSTED Yes No No 1 Access the Switch through http://192.168.1.1. Log into the Switch by entering the username (default: admin) and password (default: 1234). 2 See Section 5.4 on page 38 for how to create a VLAN and configure ports to join the VLAN. 46 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 47
    . 5 Connect your DHCP server to port 5 and a computer (as DHCP client) to either port 6 or 7. The computer should be able to get an IP address from the DHCP server. If you put the DHCP server on port 6 or 7, the computer will not able to get an IP address. GS1910/XGS1910 Series User's Guide 47
  • ZyXEL GS1910-48 | User Guide - Page 48
    specific IP address based on the information in the DHCP requests. In this example, you have configured your DHCP server (192.168.2.3) and want to have it assign a specific IP address (say 172.16.1.18) and gateway information to DHCP client A based on the slot 48 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 49
    the VLAN ID) to DHCP requests. 5 Select Replace in the Relay Information Policy field to have the Switch remove the original DHCP relay agent information (if any) and add new information in the DHCP requests. 6 Click Save to save your changes back to the Switch. GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 50
    7 The DHCP server can then assign a specific IP address based on the DHCP request. 5.8.3 Troubleshooting Check the client A's IP address. If it did not receive the IP address 172.16.1.18, make sure: 1 Client A is connected to the Switch's port 2 in VLAN 102. 5.9 How to Use Link Aggregation to Group
  • ZyXEL GS1910-48 | User Guide - Page 51
    -to-point to the same Ethernet Switch and configure the ports for LACP trunking. • LACP only works on full-duplex links. • All ports in the same trunk group must have the same media type, speed, duplex mode and flow control settings. To configure the settings: GS1910/XGS1910 Series User's Guide 51
  • ZyXEL GS1910-48 | User Guide - Page 52
    sent to a destination port in a remote switch through the intermediate ports that connect to other switches. Reflector port Intermediate port Source port Intermediate port Intermediate port Destination port Intermediate port Remote Port Mirroring VLAN 52 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 53
    2 but want to copy traffic received or transmitted on port 7 for analysis. 2 7 1 Access the Switch through http://192.168.1.1. Log into the Switch by entering the username (default: admin) and password (default: 1234). 2 Go to Configuration > Port Mirroring. Select Enabled in the Mode field to
  • ZyXEL GS1910-48 | User Guide - Page 54
    VLAN. 5 Select the direction of traffic flow you want to copy (Both in this example) on the source port (port 4 in this example). 6 Configure port 12 to act as an intermediate port to which traffic from the source port is copied that connects to Switch B. 54 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 55
    7 Click Save. Chapter 5 Tutorials GS1910/XGS1910 Series User's Guide 55
  • ZyXEL GS1910-48 | User Guide - Page 56
    Chapter 5 Tutorials 8 Click Configuration > Spanning Tree > CIST Ports to disable (R)STP on the reflector port to prevent the port from entering blocking state. 56 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 57
    in this example). The Switch will automatically create the remote port mirroring VLAN and configure the intermediate ports as a member of this VLAN. 5 Configure ports (3 and 4 for example) to act as the intermediate ports that connect to Switch A and Switch C. GS1910/XGS1910 Series User's Guide 57
  • ZyXEL GS1910-48 | User Guide - Page 58
    > MAC Table to disable MAC address learning on the intermediate ports so that the Switch will NOT filter or forward a frame based on the frame's destination MAC address, or even drop the frame whose MAC address is not in the MAC address table on these ports. 58 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 59
    VLAN. 5 Configure a port (2 for example) to act as the intermediate port that connects to Switch B. 6 Configure a port (10 for example) to act as the destination port that receives the copy of traffic from the source port on Switch A for analysis. 7 Click Save. GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 60
    additional network traffic, allowing you to significantly reduce multicast traffic passing through your Switch. The Switch can perform IGMP snooping on up to 32 VLANs. You can configure the Switch to automatically learn multicast group membership of any VLANs. 60 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 61
    the Switch removes an IGMP snooping membership entry immediately from the forwarding table when an IGMP leave message is received on the port from a host. This helps speed up the leave process. 8 Also set the maximum number of multicast groups the ports can join. GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 62
    in the VLAN to send IGMP General Query (GQ) and Group-Specific Query (GSQ) messages to this VLAN. A querier sends out an IGMP Group-Specific Query (GSQ) message to determine whether the hosts connected to the port should remain in the specific multicast group. 62 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 63
    coming from host A connected to port 9 and restrict the host's access to a specific IPv4 network. Port 9 A 10.1.2.0/24 1 Access the Switch through http://192.168.1.1. Log into the Switch by entering the username (default: admin) and password (default: 1234). GS1910/XGS1910 Series User's Guide 63
  • ZyXEL GS1910-48 | User Guide - Page 64
    Add icon to create a new ACL policy. 3 Select the port on which the matched traffic is received (All ports in this example). 4 Set Policy Filter to Specific and number in the Policy Value field. You then can apply this policy to a port using this policy ID. 5 Select IPv4 in the Frame Type field. 6
  • ZyXEL GS1910-48 | User Guide - Page 65
    models. 9 Go to Configuration > Security > Network > ACL > Ports. Enter the ID of the ACL policy you just created in the Policy ID field of the port to which you want to apply this policy, that is, port 9 to which host A is connected in this example. GS1910/XGS1910 Series User's Guide 65
  • ZyXEL GS1910-48 | User Guide - Page 66
    5.13 How to Reset the Switch via the Console Port If you lock yourself (and others) from the Switch or forget the administrator password, you will need to reload the factory-default configuration file or reset the Switch back to the factory defaults. Uploading the factory-default configuration file
  • ZyXEL GS1910-48 | User Guide - Page 67
    Done DDR SDRAM: Testing [0x800214d8-0x87fe1000] - Write Sweep ...Done DDR SDRAM: Testing [0x800214d8-0x87fe1000] - Read Sweep ...Done 3 tests completed successfully. RedBoot> fis load -d managed Image loaded from 0x80040000-0x806a4d20 RedBoot> go Username: GS1910/XGS1910 Series User's Guide 67
  • ZyXEL GS1910-48 | User Guide - Page 68
    Chapter 5 Tutorials 68 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 69
    DC models or if the DC power supply is connected in AC/DC models). 2 Disconnect and re-connect the power adaptor or cord to the Switch (in AC models or if the AC power supply is connected in AC/DC models). 3 If the problem continues, contact the vendor. GS1910/XGS1910 Series User's Guide 69
  • ZyXEL GS1910-48 | User Guide - Page 70
    6 If the problem continues, contact the vendor. 6.2 Switch Access and Login I forgot the IP address for the Switch. 1 The default management IP address is 192.168.1.1. 2 Use the console port to log in to the Switch. 3 If this does not work, you have to reset the device to its factory defaults. See
  • ZyXEL GS1910-48 | User Guide - Page 71
    5 Reset the device to its factory defaults, and try to access the Switch with the default IP address. See Section 5.13 on page 66. 6 If the problem continues, contact the vendor. I can see the Login screen, but I cannot log in to the Switch. 1 Make sure you have entered the user name and password
  • ZyXEL GS1910-48 | User Guide - Page 72
    Chapter 6 Troubleshooting 72 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 73
    ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in material or workmanship for a specific period (the Warranty Period) from the date of purchase. The Warranty Period varies by region. Check with your vendor and/or the GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 74
    are provided with the firmware package. You can download the latest firmware at www.zyxel.com. To obtain the source code covered under those Licenses, please contact [email protected] to get electrical and electronic equipment should be treated separately. 74 GS1910/XGS1910 Series User's Guide
  • ZyXEL GS1910-48 | User Guide - Page 75
    notices 73 viewing 73 changing the password 32 console port settings 20 copyright 73 D DHCP snooping 45 trusted ports 46 untrusted ports 46 disclaimer 73 documentation related 2 GS1910/XGS1910 Series User's Guide Index Index E Ethernet ports 17 default settings 17 F FCC interference statement 73
  • ZyXEL GS1910-48 | User Guide - Page 76
    Index L LEDs 22 lockout 32 login 25 password 32 S SNMP 8 status LED 22 switch lockout 32 M T managing the device good habits 8 using SNMP. See SNMP. using the web configurator. See web configurator. mini GBIC ports 18 connection speed 18 connector type 18 transceiver installation 18 transceiver
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Quick Start Guide
www.zyxel.com
GS1910/XGS1910 Series
GbE Smart Managed Switch
Version 1.00
Edition 1, 01/2013
Copyright © 2013 ZyXEL Communications Corporation
User’s Guide
Default Login Details
IP Address
User Name
admin
Password
1234