Home » ZyXEL Manuals » Bridges & Routers » ZyXEL NBG-418N » Manual Viewer

ZyXEL NBG-418N User Guide - Page 30

IP Address and Subnet Mask, DNS Server Address Assignment, WAN IP and DNS Server Address Assignment

Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Chapter 3 Connection Wizard 3.4.6 IP Address and Subnet Mask Similar to the way houses on a street share a common street name, so too do computers on a LAN share one common network number. Where you obtain your network number depends on your particular situation. If the ISP or your network administrator assigns you a block of registered IP addresses, follow their instructions in selecting the IP addresses and the subnet mask. If the ISP did not explicitly give you an IP network number, then most likely you have a single user account and the ISP will assign you a dynamic IP address when the connection is established. The Internet Assigned Number Authority (IANA) reserved this block of addresses specifically for private use; please do not use any other number unless you are told otherwise. Let's say you select 192.168.1.0 as the network number; which covers 254 individual addresses, from 192.168.1.1 to 192.168.1.254 (zero and 255 are reserved). In other words, the first three numbers specify the network number while the last number identifies an individual computer on that network. Once you have decided on the network number, pick an IP address that is easy to remember, for instance, 192.168.1.1, for your NBG-418N, but make sure that no other device on your network is using that IP address. The subnet mask specifies the network number portion of an IP address. Your NBG-418N will compute the subnet mask automatically based on the IP address that you entered. You don't need to change the subnet mask computed by the NBG-418N unless you are instructed to do otherwise. 3.4.7 DNS Server Address Assignment Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice versa, for instance, the IP address of www.zyxel.com is 204.217.0.2. The DNS server is extremely important because without it, you must know the IP address of a computer before you can access it. The NBG-418N can get the DNS server addresses in the following ways. 1 The ISP tells you the DNS server addresses, usually in the form of an information sheet, when you sign up. If your ISP gives you DNS server addresses, enter them in the DNS Server fields in the Wizard and/or WAN > Internet Connection screen. 2 If the ISP did not give you DNS server information, leave the DNS Server fields set to 0.0.0.0 in the Wizard screen and/or set to From ISP in the WAN > Internet Connection screen for the ISP to dynamically assign the DNS server IP addresses. 3.4.8 WAN IP and DNS Server Address Assignment The following wizard screen allows you to assign a fixed WAN IP address and DNS server addresses. 30 NBG-418N User's Guide

Section	Page
NBG-418N	1
Contents Overview	3
Table of Contents	5
User’s Guide	11
Introduction	13
1.1 Overview	13
1.2 Securing the NBG-418N	14
1.3 LEDs	15
1.4 The WPS Button	15
1.5 Wall Mounting	16
The Web Configurator	17
2.1 Overview	17
2.2 Accessing the Web Configurator	17
2.3 Resetting the NBG-418N	19
2.3.1 Using the RESET Button	19
Connection Wizard	21
3.1 Wizard Setup	21
3.2 Connection Wizard: STEP 1: System Information	22
3.2.1 System Name	22
3.2.2 Domain Name	23
3.3 Connection Wizard: STEP 2: Wireless LAN	23
3.3.1 WPA-PSK or WPA2-PSK Security	24
3.4 Connection Wizard: STEP 3: Internet Configuration	25
3.4.1 Ethernet Connection	26
3.4.2 PPPoE Connection	26
3.4.3 PPTP Connection	27
3.4.4 Your IP Address	28
3.4.5 WAN IP Address Assignment	29
3.4.6 IP Address and Subnet Mask	30
3.4.7 DNS Server Address Assignment	30
3.4.8 WAN IP and DNS Server Address Assignment	30
3.4.9 WAN MAC Address	31
3.5 Connection Wizard Complete	32
Modes	35
4.1 Overview	35
4.2 Setting your NBG-418N to Router Mode	36
4.2.1 Status Screen (Router Mode)	37
4.2.2 Router Mode Navigation Panel	42
4.3 Setting your NBG-418N to AP Mode	44
4.3.1 Status Screen (AP Mode)	45
4.3.2 AP Navigation Panel	47
4.4 Setting your NBG-418N to Universal Repeater Mode	48
4.4.1 Status Screen (Universal Repeater Mode)	49
4.4.2 Universal Repeater Navigation Panel	51
4.5 Setting your NBG-418N to Client Bridge Mode	52
4.5.1 Status Screen (Client Bridge Mode)	53
4.5.2 Client Bridge Navigation Panel	54
Tutorials	57
5.1 Overview	57
5.2 How to Connect to the Internet from an AP	57
5.2.1 Configure Wireless Security Using WPS on both your NBG-418N and Wireless Client	57
5.3 Enable and Configure Wireless Security without WPS on your NBG-418N	61
Technical Reference	65
Wireless LAN	67
6.1 Overview	67
6.2 What You Can Do	68
6.3 What You Should Know	69
6.3.1 Wireless Security Overview	69
6.4 General Wireless LAN Screen	70
6.4.1 No Security	72
6.4.2 WEP Encryption	73
6.4.3 WPA-PSK/WPA2-PSK	74
6.5 MAC Filter	75
6.6 Wireless LAN Advanced Screen	76
6.7 Quality of Service (QoS) Screen	78
6.8 WPS Screen	79
6.9 WPS Station Screen	80
6.10 Scheduling Screen	81
6.11 AP Select Screen	82
6.12 WLAN Info Screen	83
WAN	85
7.1 Overview	85
7.2 What You Need To Know	85
7.2.1 Configuring Your Internet Connection	85
7.3 Internet Connection	86
7.3.1 Ethernet Encapsulation	86
7.3.2 PPPoE Encapsulation	88
7.3.3 PPTP Encapsulation	90
LAN	93
8.1 Overview	93
8.2 What You Need To Know	93
8.2.1 IP Pool Setup	94
8.2.2 LAN TCP/IP	94
8.3 LAN IP Screen	94
DHCP Server	97
9.1 Overview	97
9.2 What You Can Do	97
9.3 What You Need To Know	97
9.4 General Screen	97
9.5 Advanced Screen	98
9.6 Client List Screen	100
Network Address Translation	101
10.1 Overview	101
10.2 What You Can Do	102
10.2.1 What You Need To Know	102
10.3 General NAT Screen	103
10.4 NAT Application Screen	104
10.5 Technical Reference	106
10.5.1 NAT Port Forwarding: Services and Port Numbers	106
10.5.2 NAT Port Forwarding Example	107
Dynamic DNS	109
11.1 Overview	109
11.2 Dynamic DNS Screen	109
Firewall	111
12.1 Overview	111
12.2 What You Can Do	111
12.3 What You Need To Know	112
12.3.1 About the NBG-418N Firewall	112
12.3.2 VPN Pass Through Features	112
12.4 General Firewall Screen	112
12.5 Services Screen	113
Remote Management	115
13.1 Overview	115
13.1.1 Remote Management Limitations	116
13.1.2 Remote Management and NAT	116
13.1.3 System Timeout	116
13.2 WWW Screen	116
Universal Plug-and-Play (UPnP)	119
14.1 Overview	119
14.2 What You Need to Know	119
14.3 Configuring UPnP	120
14.3.1 Using UPnP in Windows XP Example	120
14.3.2 Web Configurator Easy Access	122
System	125
15.1 Overview	125
15.2 What You Can Do	125
15.3 System General Screen	125
15.4 Time Setting Screen	126
Logs	129
16.1 Overview	129
16.2 What You Need to Know	129
16.3 View Log Screen	129
Tools	131
17.1 Overview	131
17.2 What You Can Do	131
17.3 Firmware Upload Screen	131
17.4 Configuration Screen	133
17.4.1 Backup Configuration	133
17.4.2 Restore Configuration	133
17.4.3 Back to Factory Defaults	134
17.5 Restart Screen	134
Sys OP Mode	137
18.1 Overview	137
18.2 General Screen	137
Language	139
19.1 Language Screen	139
Troubleshooting	141
20.1 Power, Hardware Connections, and LEDs	141
20.2 NBG-418N Access and Login	142
20.3 Internet Access	143
20.4 Resetting the NBG-418N to Its Factory Defaults	144
20.5 Wireless Problems	145
IP Addresses and Subnetting	147
Pop-up Windows, JavaScripts and Java Permissions	157
Setting Up Your Computer’s IP Address	167
Wireless LANs	195
Common Services	209
Legal Information	213

Match case Limit results 1 per page

Chapter 3 Connection Wizard

NBG-418N User’s Guide

3.4.6

IP Address and Subnet Mask

Similar to the way houses on a street share a common street name, so too do computers on a LAN

share one common network number.

Where you obtain your network number depends on your particular situation. If the ISP or your

network administrator assigns you a block of registered IP addresses, follow their instructions in

selecting the IP addresses and the subnet mask.

If the ISP did not explicitly give you an IP network number, then most likely you have a single user

account and the ISP will assign you a dynamic IP address when the connection is established. The

Internet Assigned Number Authority (IANA) reserved this block of addresses specifically for private

use; please do not use any other number unless you are told otherwise. Let's say you select

192.168.1.0 as the network number; which covers 254 individual addresses, from 192.168.1.1 to

192.168.1.254 (zero and 255 are reserved). In other words, the first three numbers specify the

network number while the last number identifies an individual computer on that network.

Once you have decided on the network number, pick an IP address that is easy to remember, for

instance, 192.168.1.1, for your NBG-418N, but make sure that no other device on your network is

using that IP address.

The subnet mask specifies the network number portion of an IP address. Your NBG-418N will

compute the subnet mask automatically based on the IP address that you entered. You don't need

to change the subnet mask computed by the NBG-418N unless you are instructed to do otherwise.

3.4.7

DNS Server Address Assignment

Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice

versa, for instance, the IP address of www.zyxel.com is 204.217.0.2. The DNS server is extremely

important because without it, you must know the IP address of a computer before you can access

it.

The NBG-418N can get the DNS server addresses in the following ways.

The ISP tells you the DNS server addresses, usually in the form of an information sheet, when you

DNS Server

fields in the

Wizard

and/or

WAN

> Internet Connection

screen.

If the ISP did not give you DNS server information, leave the

DNS Server

fields set to

0.0.0.0

the

Wizard

screen and/or set to

From ISP

in the

WAN

> Internet Connection

screen for the

ISP to dynamically assign the DNS server IP addresses.

3.4.8

WAN IP and DNS Server Address Assignment

The following wizard screen allows you to assign a fixed WAN IP address and DNS server addresses.