ZyXEL NBG-418N User Guide - Page 58
Push Button Configuration PBC
View all ZyXEL NBG-418N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Chapter 5 Tutorials 5.2.1.1 Push Button Configuration (PBC) 1 Make sure that your NBG-418N is turned on and that it is within range of your computer. 2 Make sure that you have installed the wireless client (this example uses the NWD210N) driver and utility in your notebook. 3 In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or WPS button) 4 Log into NBG-418N's Web Configurator and press Push Button in the Network > Wireless LAN > WPS Station screen. Note: Your NBG-418N has a WPS button located on its panel, as well as a WPS button in its configuration utility. Both buttons have exactly the same function; you can use one or the other. Note: It doesn't matter which button is pressed first. You must press the second button within two minutes of pressing the first one. The NBG-418N sends the proper configuration settings to the wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the NBG-418N securely. The following figure shows you an example to set up wireless network and security by pressing a button on both NBG-418N and wireless client (the NWD210N in this example). 58 NBG-418N User's Guide