ZyXEL P-128MH User Guide

ZyXEL P-128MH Manual

Get ZyXEL P-128MH PDF manuals and user guides View all ZyXEL P-128MH manuals
Add to My Manuals
Save this manual to your list of manuals

ZyXEL P-128MH manual content summary:

  • ZyXEL P-128MH | User Guide - Page 1
    Prestige 128IMH User's Guide Version 1.0 ZyXEL TOTAL INTERNET ACCESS SOLUTION
  • ZyXEL P-128MH | User Guide - Page 2
    Modem/ Router/Hub Prestige 128IMH ISDN/Modem Router/Hub Copyright Copyright © 1998 by ZyXEL Communications Corporation. manual, or otherwise, without the prior written permission of ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation. All rights reserved. Disclaimer ZyXEL
  • ZyXEL P-128MH | User Guide - Page 3
    Prestige 128IMH ISDN Modem/ Router/Hub Federal Communications Commission (FCC) Interference Statement radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful
  • ZyXEL P-128MH | User Guide - Page 4
    Prestige 128IMH ISDN Modem/ Router/Hub Information for Canadian Users The Industry Canada method of connection. In some cases, the company's inside wiring associated with a single line individual service may be extended by means of a certified connector assembly. The customer should be aware that
  • ZyXEL P-128MH | User Guide - Page 5
    Modem/ Router/Hub The Prestige 128IMH has been approved for connection to the Public Switched Telecommunication Network using interfaces compatible with ITU-TSS recommendation I.420 (Basic Rate ISDN user access). The Prestige 100IH complies with the following directives: 1. The Council Directive
  • ZyXEL P-128MH | User Guide - Page 6
    Prestige 128IMH ISDN Modem/ Router/Hub ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this of any kind of character to the purchaser. To obtain the services of this warranty, contact ZyXEL's Service Center; refer to the separate Warranty Card for your Return Material
  • ZyXEL P-128MH | User Guide - Page 7
    Prestige 128IMH ISDN Modem/ Router/Hub Customer Support If you have questions about your ZyXEL product or desire assistance, contact ZyXEL Communications Corporation offices worldwide, in one of the following ways: METHOD NORTH AMERICA OUTSIDE NORTH AMERICA E-Mail-Tech [email protected] Support
  • ZyXEL P-128MH | User Guide - Page 8
  • ZyXEL P-128MH | User Guide - Page 9
    Getting to Know Your Router/Hub 1-1 1.1 Prestige 128IMH ISDN/Modem Bridge Router 1-1 1.2 Features of Prestige 128IMH 1-1 1.3 The Built-In Modem 1-5 1.4 Applications for Prestige 128IMH 1-5 Chapter 2...2-1 Hardware Installation & Initial Setup 2-1 2.2 Prestige 128IMH Rear Panel and Connections
  • ZyXEL P-128MH | User Guide - Page 10
    Prestige 128IMH ISDN Modem/ Router/Hub 2.10 Protocol Dependent Ethernet Setup 2-20 Chapter 3...3-1 Internet Access Application 5-1 Chapter 6...6-1 IPX Configuration ...6-1 6.1 IPX Network Environment 6-1 6.2 Prestige in an IPX Environment 6-4 6.3 IPX Spoofing ...6-5 6.4 IPX Ethernet Setup...6-6
  • ZyXEL P-128MH | User Guide - Page 11
    Prestige 128IMH ISDN Modem/ Router/Hub Bridging Setup ...7-1 7.1 Bridging in General ...7-1 7.2 Bridge Ethernet Setup 7-1 Servers behind SUA 8-12 Chapter 9...9-1 Advanced Phone Services 9-1 9.1 Getting Started ...9-1 9.2 Setting Up Supplemental Phone Service 9-2 9.3 The Flash Key ...9-2 9.4 Call
  • ZyXEL P-128MH | User Guide - Page 12
    Prestige 128IMH ISDN Modem/ Router/Hub 10.2 Configuring a Filter Set 10-3 10.3 Configuring a Filter Rule 10-7 10.4 Novell IPX Filter Rule 10-13 Chapter 11 ...11-1 SNMP
  • ZyXEL P-128MH | User Guide - Page 13
    Prestige 128IMH ISDN Modem/ Router/Hub 14.6 Firmware Update 14-14 14.7 Command Interpreter Mode 14-20 14.8 Call Control ...14-20 Chapter 15 ...15-1 Troubleshooting ...15-1 15.1 Problems Starting Up the Prestige 15-1 15.2 Problems With the ISDN Line 15-2 15.3 Problems with the LAN Interface 15-3
  • ZyXEL P-128MH | User Guide - Page 14
  • ZyXEL P-128MH | User Guide - Page 15
    1-2 LAN-to-LAN Connection Application 1-7 Figure 1-3 Telecommuting/Remote Access Server Application 1-8 Figure 2-1 Front Panel ...2-1 Figure 2-2 Prestige 128IMH Rear Panel and Connections 2-2 Figure 2-3 Power-On Display...2-5 Figure 2-4 Login Screen ...2-6 Figure 2-5 SMT Main Menu...2-9 Figure
  • ZyXEL P-128MH | User Guide - Page 16
    Prestige 128IMH ISDN Modem/ Router/Hub Figure 4-1 Menu 11 - Remote Node Setup ...4-2 Figure 4-2 Menu Route Setup ...5-6 Figure 5-7Edit IP Static Route...5-7 Figure 6-1 Netware Server ...6-3 Figure 6-2 Prestige in an IPX Environment ...6-4 Figure 6-3 Menu 3.3 - Novell IPX Ethernet Setup 6-6 Figure
  • ZyXEL P-128MH | User Guide - Page 17
    Prestige 128IMH ISDN Modem/ Router/Hub Figure 8-3 Menu 13 - Default Dial-in Setup ...8-4 Figure 8-4 Default Dial-in Filter...8-8 Figure 8-5 Menu 14 - Dial-in User Setup...8-8 Figure 8-6 Edit
  • ZyXEL P-128MH | User Guide - Page 18
    Prestige 128IMH ISDN Modem/ Router/Hub Figure 14-8 Menu 24.4 - System Maintenance - Diagnostic 14-11 Figure 14-9 Trace Display for a Successful Manual Call 14-13 Figure 14-10 Trace Display for a Failed Authentication 14-13 Figure 14-11 Menu 24.7 - System Maintenance - Upload Firmware 14-15
  • ZyXEL P-128MH | User Guide - Page 19
    Prestige 128IMH ISDN Modem/ Router/Hub List of Tables Table 1-1 ISDN Phone Line Info ...xxv Table 1-2 IP subnet masks and the number of hosts allowed xxvi Table 2-1
  • ZyXEL P-128MH | User Guide - Page 20
    Prestige 128IMH ISDN Modem/ Router/Hub Table 7-1 Bridge Ethernet Setup Menu - Handle IPX Field User Menu Fields...8-10 Table 8-4 Edit Dial-in User Menu Fields (continued 8-11 Table 8-5 Services vs. Port number...8-13 Table 9-1 Phone Flash Commands...9-5 Table 10-1 Abbreviations Used in the Filter
  • ZyXEL P-128MH | User Guide - Page 21
    Prestige 128IMH ISDN Modem/ Router/Hub Table 14-6 Call Control Parameters Fields...14-22 Table 14-7 Call History Fields...14-25 Table 15-1 Troubleshooting the Start-Up of your Prestige 15-1 Table 15-2 Troubleshooting the ISDN Line ...15-2 Table 15-3 Troubleshooting the LAN Interface...15-3 Table 15
  • ZyXEL P-128MH | User Guide - Page 22
  • ZyXEL P-128MH | User Guide - Page 23
    Service Digital Network). With the built-in V.90 modem, the Prestige is equally capable of supporting modem calls. The Prestige 128IMH supports The fourteen chapters of this manual consists are designed to guide you through the configuration of your Prestige 128IMH for its various applications.
  • ZyXEL P-128MH | User Guide - Page 24
    to find out what type of ISDN service is available and the switch type. 2. Provide your telephone company with the line provisioning information for that switch type, which can be found at Chapter 15 of this manual. This insures proper operation of all of the Prestige's features with the ISDN line
  • ZyXEL P-128MH | User Guide - Page 25
    to route the incoming analog call for this telephone number to PHONE port number 1 or 2. Supplemental Service Activation Keys - Sometimes called 'buttons,' most of the supple mental services supported by the Prestige require that an activation key be set before a feature can be used. You have now
  • ZyXEL P-128MH | User Guide - Page 26
    number of hosts allowed IP Subnet Mask 255.255.255.0 255.255.255.128 255.255.255.192 255.255.255.224 255.255.255.255 Number Manual This manual is divided into five parts: 1. Getting Started (Chapters 1-2) is structured as a step-by-step guide to help you connect, install and setup your Prestige
  • ZyXEL P-128MH | User Guide - Page 27
    . 5. Troubleshooting (Chapter 14), provides information about solving common problems. Regardless of your particular application, it is important that you follow the steps outlined in Chapters 1-2 to connect your Prestige to your LAN. You can then refer to the appropriate chapters of the manual
  • ZyXEL P-128MH | User Guide - Page 28
  • ZyXEL P-128MH | User Guide - Page 29
    -in users to making LAN-to-LAN connections to remote networks. 1.2 Features of Prestige 128IMH The following are the key features of the Prestige 128IMH. ISDN Basic Rate Interface (BRI) Support The P128IMH supports a single BRI. A BRI offers two 64Kbps channels, which can be used independently for
  • ZyXEL P-128MH | User Guide - Page 30
    Prestige 128IMH ISDN Modem/ Router/Hub Single User Account (SUA) The SUA™ (Single User Account) features allows multiple users to share a single user account. Incoming Call Support In addition to making outgoing calls, the Prestige allows you to configure it as a remote access server for
  • ZyXEL P-128MH | User Guide - Page 31
    ). Prestige 128IMH ISDN Modem/ Router/Hub Logging and Tracing ♦ CDR (Call Detail Record) to help to analyze and manage the telephone bill. ♦ Built-in message logging and packet tracing. ♦ Unix syslog facility support . RADIUS Support RADIUS (Remote Authentication Dial-In User Service) is
  • ZyXEL P-128MH | User Guide - Page 32
    128IMH firmware over the local LAN. Supplementary Voice Features The Prestige supports the following Supplementary Voice Features on both of its Analog (POTS) Phone Ports: ♦ Call Waiting ♦ Three Way Calling (conference) ♦ Call Transfer ♦ Call Forwarding Caller ID Display Services on Analog PSTN
  • ZyXEL P-128MH | User Guide - Page 33
    to speed up data transfer. 1.4 Applications for Prestige 128IMH The following sections show you the possible applications for your Prestige. 1.4.1 Internet Access The Prestige is the ideal high-speed Internet access solution. Your Prestige supports the TCP/IP protocol, which the Internet uses
  • ZyXEL P-128MH | User Guide - Page 34
    Prestige 128IMH ISDN Modem/ Router/Hub Figure 1-1 Internet Access Application Internet Single User Account For a SOHO (small office/Home Office) environment, your Prestige bundle two B channels in a BRI line. The Prestige supports TCP/IP and Novell IPX routing, as well as transparent bridging for
  • ZyXEL P-128MH | User Guide - Page 35
    Prestige 128IMH ISDN Modem/ Router/Hub Figure 1-2 LAN-to-LAN Connection Application 1.4.3 Remote Access Server Your Prestige allows remote users to dial-in and gain access to your LAN. This feature enables also use callback for security and/or accounting purposes. Getting to know your Prestige 1-7
  • ZyXEL P-128MH | User Guide - Page 36
    Prestige 128IMH ISDN Modem/ Router/Hub Figure 1-3 Telecommuting/Remote Access Server Application 1-8 Getting to know your Prestige
  • ZyXEL P-128MH | User Guide - Page 37
    Prestige 128IMH ISDN Modem/ Router/Hub Chapter 2 Hardware Installation & Initial Setup This chapter shows you how to connect the hardware and the initial setup. 2.1.1 Front Panel LEDS The LED indicators on the front panel indicate the router/hub functional status of the Prestige. The following table
  • ZyXEL P-128MH | User Guide - Page 38
    Rear Panel and Connections The figure below shows the rear panel of your Prestige 128MH and the connection diagram. Figure 2-2 Prestige 128IMH Rear Panel and Connections This section outlines how to connect your Prestige 128MH to the LAN and to the ISDN network. Step 1. Connecting the ISDN Line
  • ZyXEL P-128MH | User Guide - Page 39
    the config uration remotely through telnet connections. See Chapter 12 - Telnet Configuration and Capabilities for detailed instructions on using telnet to configure your Prestige. 2.3 Additional Installation Requirements In addition to the contents of your package, there are other hardware and
  • ZyXEL P-128MH | User Guide - Page 40
    Prestige 128IMH ISDN Modem/ Router/Hub After the Prestige is properly set up, you can make future changes to the configuration through telnet connections. 2-4 Hardware Installation and Setup
  • ZyXEL P-128MH | User Guide - Page 41
    you to press Enter to continue, as shown. Copyright (c) 1994 - 1998 ZyXEL Communications Corp. ethernet address: 00:a0:c5:98:23:12 Resetting ISDN firmware.(2) ZyXEL Prestige DSS1: V 099 Figure 2-3 Power-On Display Step 2. Entering Password The login screen appears after you press Enter, prompting
  • ZyXEL P-128MH | User Guide - Page 42
    Prestige 128IMH ISDN Modem/ Router/Hub Figure 2-4 Login Screen 2-6 Hardware Installation and Setup
  • ZyXEL P-128MH | User Guide - Page 43
    Prestige 128IMH ISDN Modem/ Router/Hub 2.5 Navigating the SMT Interface The SMT (System Management Terminal) is the interface that you use to configure your Prestige. Several operations that you should be familiar with before you attempt to modify the configuration are listed in the table below.
  • ZyXEL P-128MH | User Guide - Page 44
    Prestige 128IMH ISDN Modem/ Router/Hub 2-8 Hardware Installation and Setup
  • ZyXEL P-128MH | User Guide - Page 45
    Prestige 128IMH ISDN Modem/ Router/Hub After you enter the password, the SMT displays the Main Menu, as shown below. Copyright (c) 1994 - 199 8 ZyXEL Communications Corp. Prestige 128 IMH Main Menu Getting Starte d 1. General Setup 2. ISDN Setup 3. Ethernet Setup 4. Internet Access Setup Advanced
  • ZyXEL P-128MH | User Guide - Page 46
    Prestige 128IMH ISDN Modem/ Router/Hub 14 Dial-in User Setup 15 SUA Server Setup 21 Filter Set Configuration 22 SNMP Configuration 23 System Security 24 System
  • ZyXEL P-128MH | User Guide - Page 47
    Prestige 128IMH ISDN Modem/ Router/Hub When the Submenu 23.1- System Security-Change Password appears, as shown in the figure below, type in your existing system password, i.e.,
  • ZyXEL P-128MH | User Guide - Page 48
    Prestige 128IMH ISDN Modem/ Router/Hub 2.7 General Setup Menu 1 - General Setup contains administrative and system-related information. To enter Menu 1 and fill in the required information, follow
  • ZyXEL P-128MH | User Guide - Page 49
    Prestige 128IMH ISDN Modem/ Router/Hub Field Table 2-4 General Setup Menu Fields Description Example Internet access. Set this field Yes to enable IPX routing. Turn on/off bridging for protocols not supported (e.g., SNA) or not turned on in the previous Route fields. Yes/No Yes/No Yes/No Note
  • ZyXEL P-128MH | User Guide - Page 50
    128IMH ISDN Modem/ Router/Hub 2.8 European ISDN Setup Menus Menu 2 is for you to enter the information about your ISDN line. Please note that the Prestige only accepts digits in phone number fields; please do no include '-' or spaces in these fields. 2.8.1 Switch Type The only switch type supported
  • ZyXEL P-128MH | User Guide - Page 51
    Prestige 128IMH ISDN Modem/ Router/Hub Call Routing is either A/B Adapter 1 or 2, then the Prestige uses Global Analog Call a number (a single digit in most cases) when you need an outside line. If your Prestige is connected to a PABX, enter this number in PABX Outside Line Prefix, otherwise, leave
  • ZyXEL P-128MH | User Guide - Page 52
    Prestige 128IMH ISDN Modem/ Router/Hub isdn initstring set AT&ZOx=number where x is 'I' for ISDN data calls, 'A' for A/B Adapter 1 and 'B' for A/B Adapter 2. For instance, isdn initstring
  • ZyXEL P-128MH | User Guide - Page 53
    Prestige 128IMH ISDN Modem/ Router/Hub Figure 2-9 Menu 2 - ISDN Setup Table 2-5 Menu 2 - ISDN Setup Switch Same as above for A/B Adapter 2 (PHONE2). Enter the number for outside line access if the Prestige is connected to a PABX; otherwise, leave it blank. The maximum number of digits is 4. You
  • ZyXEL P-128MH | User Guide - Page 54
    Prestige 128IMH ISDN Modem/ Router/Hub ISDN Call Waiting This allows you to you select Yes, the Prestige will perform a loop-back test to check the ISDN line. If the loop-back test fails, please note the error message that you receive and take the appropriate troubleshooting action. Setup LoopBack
  • ZyXEL P-128MH | User Guide - Page 55
    Prestige 128IMH ISDN Modem/ Router/Hub Figure 2-11 Loopback test 2.9 Ethernet Setup This section describes how to configure the Ethernet using Menu 3 - Ethernet Setup. From the Main
  • ZyXEL P-128MH | User Guide - Page 56
    Prestige 128IMH ISDN Modem/ Router/Hub Figure 2-13 Menu 3.1 - General Ethernet Setup If you need to define filters, please read Chapter 9- Filter Set Configuration, then return to
  • ZyXEL P-128MH | User Guide - Page 57
    Prestige 128IMH ISDN Modem/ Router/Hub Chapter 3 Internet Access This chapter shows you how to configure the LAN as well as the WAN of your Prestigefor Internet
  • ZyXEL P-128MH | User Guide - Page 58
    Prestige 128IMH ISDN Modem/ Router/Hub 3.2 TCP/IP Parameters 3.2.1 IP Address and Subnet Mask address that you entered. You don't need to change the subnet mask computed by the Prestige unless you are instructed to do otherwise. 3.2.2 RIP Setup RIP (Routing Information Protocol) allows a router to
  • ZyXEL P-128MH | User Guide - Page 59
    to Windows 95, Windows NT and other systems that support the DHCP client. IP Pool Setup The Prestige is pre-configured with a pool of 32 IP to its corresponding IP address and vice versa, e.g., the IP address of www.zyxel.com is 204.217.0.2. The DNS server is extremely important because without it, a
  • ZyXEL P-128MH | User Guide - Page 60
    Prestige 128IMH ISDN Modem/ Router/Hub it. The DNS server addresses that not give you explicit DNS servers, chances are the DNS servers are conveyed through IPCP negotiation. The Prestige supports the IPCP DNS server extensions through the DNS proxy feature. If the Primary and Secondary DNS Server
  • ZyXEL P-128MH | User Guide - Page 61
    Prestige 128IMH ISDN Modem/ Router/Hub 3.3 TCP/IP Ethernet Setup and DHCP You will now use Menu 3.2 to configure your Prestige for TCP/IP. To edit Menu 3.2, select the menu option Ethernet Setup in the Main Menu. When Menu 3 appears, select the submenu option TCP/IP
  • ZyXEL P-128MH | User Guide - Page 62
    128IMH ISDN Modem/ Router/Hub Follow the instructions in the following table on how to configure the DHCP fields. Field Table 3-1 DHCP Ethernet Setup Menu Fields Description Example DHCP Setup DHCP= This field enables/disabled the DHCP server. If it is set to None Server, your Prestige
  • ZyXEL P-128MH | User Guide - Page 63
    Prestige 128IMH ISDN Modem/ Router/Hub Follow the instructions in the following table to configure TCP/IP parameters for the Ethernet port. Field Table 3-2 TCP/IP Ethernet Setup Menu Fields Description Example TCP/IP Setup IP Address Enter the IP address of your Prestige in dotted decimal
  • ZyXEL P-128MH | User Guide - Page 64
    Prestige 128IMH ISDN Modem/ Router/Hub 3.4 Internet Access Configuration Menu 4 allows you to enter the Internet Access information in one screen. Menu 4 is actually a simplified setup for one of the remote nodes that you can access in Menu 11. Before you configure your Prestige for Internet
  • ZyXEL P-128MH | User Guide - Page 65
    Prestige 128IMH ISDN Modem/ Router/Hub From the Main Menu, enter option Internet Access Setup to go to Menu 4 - Internet Access Setup, as displayed below. The following table contains instructions on how to configure your Prestige Enter the name of your Internet Service Provider, e.g., myISP. This
  • ZyXEL P-128MH | User Guide - Page 66
    point, the SMT will ask if you wish to test the Internet connection. If you select Yes, your Prestige will call the ISP to test the Internet connection. If the test fails, note the error message that you receive on the screen and take the appropriate troubleshooting steps. 3-10 Internet Access
  • ZyXEL P-128MH | User Guide - Page 67
    Prestige 128IMH ISDN Modem/ Router/Hub 3.5 Single User Account Typically, if there are .168.1.33 Same Network Number 192.168.1.34 192.168.1.35 192.168.1.1 INTERNET 192.168.1.36 Prestige The SUA network appears as a single host to the Internet. illustrates a typical Single User Account
  • ZyXEL P-128MH | User Guide - Page 68
    Prestige 128IMH ISDN Modem/ Router/Hub The IP address for the SUA can be either do not specify a server. All incoming inquiries will be filtered out by your Prestige. l UDP and TCP packets can be routed. In addition, partial ICMP, including echo and trace route, is supported. 3-12 Internet Access
  • ZyXEL P-128MH | User Guide - Page 69
    Prestige 128IMH ISDN Modem/ Router/Hub 3.5.2 Single User Account Configuration The steps for configuring your Prestige for Single User User Account field and select Yes (or No to disable SUA). Then follow the instructions on how to configure the SUA fields. Field Table 3-5 Single User Account Menu
  • ZyXEL P-128MH | User Guide - Page 70
    Prestige 128IMH ISDN Modem/ Router/Hub At this point, your Prestige will ask if you wish to test the Internet connection. If you select Yes, the Prestige will call the ISP and test the configuration. If the test fails, note the error messages on the screen and take the appropriate troubleshooting
  • ZyXEL P-128MH | User Guide - Page 71
    Prestige 128IMH ISDN Modem/ Router/Hub Step 3. Enter Menu 11 again and select your Backup ISP. Step 4. In Menu 11.1, set the Active field to Yes. You will now be able to access the Internet through the backup ISP Remote Node. Internet Access 3-15
  • ZyXEL P-128MH | User Guide - Page 72
  • ZyXEL P-128MH | User Guide - Page 73
    Prestige 128IMH ISDN Modem/ Router/Hub Chapter 4 Remote Node Configuration A remote node is required for nodes. Once a remote node is configured correctly, traffic to the remote network will trigger your Prestige to make a call automatically, i.e., Dial On Demand. In this chapter, we will discuss
  • ZyXEL P-128MH | User Guide - Page 74
    Prestige 128IMH ISDN Modem/ Router/Hub Menu 11 - Remote Node Setup Menu 11 - Remote Node Setup 1. remotenodename 2. ________ 3. ________ 4. ________ 5. ________ 6. ________ 7. ________ 8. ________ 9. ________ 10. ________
  • ZyXEL P-128MH | User Guide - Page 75
    Prestige 128IMH ISDN Modem/ Router/Hub Figure 4-2 Menu 11.1 Remote Node Profile Field remote node. Options Press space bar to toggle Yes/No Both Incoming l If set to Outgoing, your Prestige will drop any incoming calls from this remote node. Outgoing Several other fields in this menu depend on
  • ZyXEL P-128MH | User Guide - Page 76
    Prestige 128IMH ISDN Modem/ Router/Hub Incoming: Incoming: Incoming: Outgoing: Outgoing: Outgoing: Outgoing: Rem Node Enter the password used when this remote node calls Password your Prestige. Rem CLID This field is applicable only if Call Direction is either Both or Incoming. Otherwise, an N/A
  • ZyXEL P-128MH | User Guide - Page 77
    Prestige 128IMH ISDN Modem/ Router/Hub Numbers If the Primary Phone number is busy or does not answer, your Prestige will dial the Secondary determines the protocols that your Prestige will route. Bridge Bridging is used for protocols that the Prestige doe not support, e.g., SNA, or not turned
  • ZyXEL P-128MH | User Guide - Page 78
    Prestige 128IMH ISDN Modem/ Router/Hub Session Option: Edit Filter Sets Use the space obvious reasons. Please do not specify a nailedup connection unless your telephone company offers flat-rate service or you need a constant connection and the cost is of no concern. 4.1.3 Outgoing Authentication
  • ZyXEL P-128MH | User Guide - Page 79
    Prestige 128IMH ISDN Modem/ Router/Hub peer disconnects right after a successful authentication, please make sure that you specify the correct authentication protocol when connecting to such an implementation. 4.1.4 PPP Multilink The Prestige uses the PPP Multilink Protocol (PPP/MP ) to bundle
  • ZyXEL P-128MH | User Guide - Page 80
    Prestige 128IMH ISDN Modem/ Router/Hub When bandwidth on demand is enabled, a For example, '30-60' means the add threshold is 30 kbps and subtract threshold is 60 kbps. The Prestige performs bandwidth on demand only if it initiates the call. Addition and subtraction are based on the value set in
  • ZyXEL P-128MH | User Guide - Page 81
    Prestige 128IMH ISDN Modem/ Router/Hub Figure 4-3 Menu 11.2 - Remote Node PPP Options The following table describes the Remote Node PPP Options Menu, and contains instructions one channel is used or 128 where two channels are used as soon as a packet triggers a call 64/128 Max Trans Rate Target
  • ZyXEL P-128MH | User Guide - Page 82
    Prestige 128IMH ISDN Modem/ Router/Hub Add Persist This parameter specifies the number of seconds where traffic is above the adding threshold before the Prestige will bring up the second link. Default = 5 sec Subtract Persist This parameter specifies the number of seconds where traffic is below
  • ZyXEL P-128MH | User Guide - Page 83
    Prestige 128IMH ISDN Modem/ Router/Hub Chapter 5 Remote Node TCP/IP Configuration This chapter shows you how to configure the TCP/IP parameters of a remote node. A typical LAN-to-LAN application is to use your Prestige to connect a branch office to the headquarters, as depicted in the folllowing
  • ZyXEL P-128MH | User Guide - Page 84
    Prestige 128IMH ISDN Modem/ Router/Hub 5.1.1 Remote Node Setup Follow the procedure in Chapter 5 - Remote Node Configuration to configure the protocolindependent parameters in Menu 11 - Remote Node Profile. For the TCP/IP parameters, follow the instructions below. If you are configuring your
  • ZyXEL P-128MH | User Guide - Page 85
    Prestige 128IMH ISDN Modem/ Router/Hub The following diagram explains the Sample IP Addresses to help you to understand the field of My Wan Addr in Menu 11.3. Remote Network 192.168.1.0 Local Network 192.168.2.0 192.168.3.1 192.168.3.2 Prestige Figure 5-3 Sample IP Addresses for a TCPI/IP LAN
  • ZyXEL P-128MH | User Guide - Page 86
    Prestige 128IMH ISDN Modem/ Router/Hub The following table shows the TCP/IP related fields be between 1 and 15. In practice, 2 or 3 is usually a good number. This parameter determines if the Prestige will include the route to this remote node in its RIP broadcasts. If set to Yes, this route is kept
  • ZyXEL P-128MH | User Guide - Page 87
    Prestige 128IMH ISDN Modem/ Router/Hub Once you have completed filling in the know that there is a route through remote node R. The static routes are for you to tell the Prestige about the networks beyond the remote nodes. Figure 5-4 Example of Static Routing Topology To configure an IP static
  • ZyXEL P-128MH | User Guide - Page 88
    Prestige 128IMH ISDN Modem/ Router/Hub 1. IP Static Route 2. IPX Static Route 3. Bridge Static Route Please enter selection: Figure 5-5 Menu 12 - Static Route Setup From Menu 12,
  • ZyXEL P-128MH | User Guide - Page 89
    Prestige 128IMH ISDN Modem/ Router/Hub Figure 5-7Edit IP Static Route The following table describes the Enter the IP address of the gateway. The gateway is an immediate neighbor of your Prestige that will forward the packet to the destination. On the LAN, the gateway must be a router on
  • ZyXEL P-128MH | User Guide - Page 90
  • ZyXEL P-128MH | User Guide - Page 91
    Prestige 128IMH ISDN Modem/ Router/Hub Chapter 6 IPX Configuration This chapter shows you how to configure the IPX parameters of the Prestige. 6.1 IPX Network Environment Novell bundles the protocol stack, the server software and routing functionality in their NetWare server products. So a NetWare
  • ZyXEL P-128MH | User Guide - Page 92
    Prestige 128IMH ISDN Modem/ Router/Hub 6.1.2 Frame Types IPX can run on top of four different frame types on the Ethernet. These frame types are 802.2, 802.3,
  • ZyXEL P-128MH | User Guide - Page 93
    Prestige 128IMH ISDN Modem/ Router/Hub Figure 6-1 Netware Server IPX Configuration 6-3
  • ZyXEL P-128MH | User Guide - Page 94
    Prestige 128IMH ISDN Modem/ Router/Hub 6.2 Prestige in an IPX Environment There are two scenarios in which your Prestige is deployed, depending on whether there is a Seed Router (Client Side) Assigns Network Number Not Seed Router (Server Side) Learns Network Number NetWare Clients Prestige
  • ZyXEL P-128MH | User Guide - Page 95
    Prestige 128IMH ISDN Modem/ Router/Hub 6.2.2 Prestige on LAN without Server Each IPX network must have a seed router. If you only have NetWare clients on your network, then you must configure the Prestige (Routing Information Protocol) and SAP (Service Advertising Protocol) response messages. l Block
  • ZyXEL P-128MH | User Guide - Page 96
    Prestige 128IMH ISDN Modem/ Router/Hub 6.4 IPX Ethernet Setup From Menu 3 - Ethernet Setup, . Field Seed Router Frame Type Table 6-1 Novell IPX Ethernet Setup Fields Description Determine if your Prestige is to act as a seed router. Enable/Disable the individual frame type. Remember to enable
  • ZyXEL P-128MH | User Guide - Page 97
    Prestige 128IMH ISDN Modem/ Router/Hub Press [Enter] at the message [Press ENTER to Confirm ...] to LAN External Network Number = 222 NetWare Clients Prestige NetWare Server Internal Network Number = 111 A typical LAN-to-LAN application is to use your Prestige to call from a branch office to the
  • ZyXEL P-128MH | User Guide - Page 98
    Prestige 128IMH ISDN Modem/ Router/Hub 6.5.1 IPX Remote Node Setup Follow the procedure in Chapter 5 to configure the protocol-independent parameters in Menu 11.1 - Remote Node Profile. For the IPX-specific parameters in Menu 11.3 - Remote Node Network Layer Options, follow the instructions below.
  • ZyXEL P-128MH | User Guide - Page 99
    Prestige 128IMH ISDN Modem/ Router/Hub The table below describes the IPX-specific parameters of the remote node setup. Field Table 6-2 Remote Node Novell IPX Options Description Option Dial-On-Query This field is necessary for your Prestige on the client side. When set to Yes, any Get Service
  • ZyXEL P-128MH | User Guide - Page 100
    Prestige 128IMH ISDN Modem/ Router/Hub 6.5.2 IPX Static Route Setup Similar to IP, IPX static routes tell the Prestige how to reach servers beyond a remote node before a connection to that remote node is established. From Menu 12, select two, then select one of the
  • ZyXEL P-128MH | User Guide - Page 101
    Prestige 128IMH ISDN Modem/ Router/Hub The following table contains the instructions on how to configure the Edit IP on which the server will receive service requests. The default for this field is hex [0451]. Type # This field identifies the type of service the server provides. The default for
  • ZyXEL P-128MH | User Guide - Page 102
  • ZyXEL P-128MH | User Guide - Page 103
    Prestige 128IMH ISDN Modem/ Router/Hub Chapter 7 Bridging Setup This chapter shows you how to configure the bridging parameters of your Prestige. to support protocols other than IP and IPX on your network. For IP and IPX, enable the respective routing if you need it; do not bridge what the Prestige
  • ZyXEL P-128MH | User Guide - Page 104
    Prestige 128IMH ISDN Modem/ Router/Hub From Menu 3 - Ethernet Setup, enter option Bridge handling for IPX. Client When there are only client workstations on the LAN. RIP and SAP (Service Advertising Protocol) response packets will not trigger calls. Server When there are only IPX servers on
  • ZyXEL P-128MH | User Guide - Page 105
    Prestige 128IMH ISDN Modem/ Router/Hub 7.2.1 Remote Node Bridging Setup Follow the procedure in Chapter 5 to configure the protocol-independent parameters in Menu 11.1 - Remote Node Profile.
  • ZyXEL P-128MH | User Guide - Page 106
    Prestige 128IMH ISDN Modem/ Router/Hub The following table describes the bridging-specific parameters in information in its internal tables while the line is down. If this information is retained, your Prestige will not have to recompile the tables when the line is brought back up. Once you have
  • ZyXEL P-128MH | User Guide - Page 107
    Prestige 128IMH ISDN Modem/ Router/Hub 7.3 Bridge Static Route Setup Similar to network layer static routes, a bridging static route tells the Prestige about the route to a node before a connection is established. You configure bridge static routes in Menu 12.3.1, by Menu 12.3 - Bridge Static Route
  • ZyXEL P-128MH | User Guide - Page 108
    Prestige 128IMH ISDN Modem/ Router/Hub The following table describes the Bridge Static Route Menu. Field Table 7-3 Bridge Static Route Menu Fields Description Route Name Enter a name
  • ZyXEL P-128MH | User Guide - Page 109
    Prestige 128IMH ISDN Modem/ Router/Hub Chapter 8 Dial-in Server Configuration You can configure your Prestige to receive calls from remote dial-in users than what Prestige can support locally, you can use an external RADIUS server to provide authentication service. For details on using a RADIUS
  • ZyXEL P-128MH | User Guide - Page 110
    Prestige 128IMH ISDN Modem/ Router/Hub 8.1 Remote Access Server Telecommuting enables and dial-out capabilities, e.g., a Windows PC or a Macintosh. For telecommuters to call in to your Prestige, you need to configure a dial-in user profile for each telecommuter. Additionally, you need to configure
  • ZyXEL P-128MH | User Guide - Page 111
    Prestige 128IMH ISDN Modem/ Router/Hub 8.2 LAN-to-LAN Server Application Your Prestige can also be used as a dial-in server for LAN-to-LAN application to provide access for the workstations on a remote network. For your Prestige to be set up as a LAN-toLAN server, you need to configure the Default
  • ZyXEL P-128MH | User Guide - Page 112
    Prestige 128IMH ISDN Modem/ Router/Hub 8.3 Default Dial-In Setup This Compression= Yes Mutual Authen= No PAP Login= N/A PAP Password= N/A Multiple Link Options: Max Trans Rate= 128 Callback Budget Management: Allocated Budget(min)= Period(hr)= IP Address Supplied By: Dial-in User= Yes IP Pool
  • ZyXEL P-128MH | User Guide - Page 113
    Prestige 128IMH ISDN Modem/ Router/Hub Field Table 8-2 Default Dial-in Setup Fields Description for this field: l None - No CLID is required. l Required - CLID must be available, or the Prestige will not answer the call. l Preferred - If the CLID is available then CLID will be used; otherwise,
  • ZyXEL P-128MH | User Guide - Page 114
    Prestige 128IMH ISDN Modem/ Router/Hub does not apply to CHAP authentication. PAP the maximum data transfer rate between your Prestige and the remote dial-in user. 64 - At most, one B channel is used. 128 - A maximum of two channels can be used.. When the Prestige calls back to the remote dial-
  • ZyXEL P-128MH | User Guide - Page 115
    Prestige 128IMH ISDN Modem/ Router/Hub field specifies the first one in the pool. Net. Num. Supplied By: IPX Pool This field tells your Prestige to provide the remote host with an IPX network number from the pool. Otherwise, your Prestige will generate a random IPX network number. Yes/No (Default
  • ZyXEL P-128MH | User Guide - Page 116
    Prestige 128IMH ISDN Modem/ Router/Hub 8.3.1 Default Dial-in Filter Use Menu 13.1 - Default Dial-in Filter to specify the filter set(s) to apply to the incoming and outgoing traffic between all dial-in users and your Prestige. Note that the filter set(s) only applies to the dial-in users but not the
  • ZyXEL P-128MH | User Guide - Page 117
    Menu 14 - Dial-in UsePrreSsetitguep 128IMH ISDN Modem/ Router/Hub 1. johndoe 2. ________ 3. ________ 4. ________ 5. ________ 6. ________ 7. ________ 8. ________ Enter Menu Selection Number: Step 2. Select one of the users by number, this
  • ZyXEL P-128MH | User Guide - Page 118
    Prestige 128IMH ISDN Modem/ Router/Hub The following table provides instructions on how to fill in the Edit to specify the call back telephone number on a call-by-call basis. This is useful when your Prestige returns a call back to a mobile user at different numbers, e.g., a sales rep. In a hotel
  • ZyXEL P-128MH | User Guide - Page 119
    ID sent by the switch to match against the CLIDs in the database. Please note that for CLID authentication to work on the Prestige, your telephone company must support caller ID. You must also include the AT command in the [initAT] string in Menu 2 to enable caller ID detection on the modem
  • ZyXEL P-128MH | User Guide - Page 120
    IP address 192.168.1.3. Please note that a server can support more than one service, e.g., a server can provide both FTP and DNS service, while another provides only web service. Also, since you need to specify the IP address of a server in the Prestige, a server must have a fixed IP address and not
  • ZyXEL P-128MH | User Guide - Page 121
    Prestige 128IMH ISDN Modem/ Router/Hub 3. Enter the service port number in the Port # field and the inside IP address of the server in the Menu 15 - Multiple Server Configuration Port # ---- .1 Default 2. 0 3. 0 4. 0 5. 0 6. 0 7. 0 8. 0 IP Address 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0
  • ZyXEL P-128MH | User Guide - Page 122
    Prestige 128IMH ISDN Modem/ Router/Hub Services Port Number FTP (File Transfer Protocol) 21 Telnet 23 SMTP (Simple Mail Transfer Protocol) 25 DNS(Domain Name System) 53 HTTP (Hyper Text Transfer protocol
  • ZyXEL P-128MH | User Guide - Page 123
    Modem/ Router/Hub Chapter 9 Advanced Phone Services The Prestige 128IMH supports a comprehensive set of advanced calling features known as Supplemental Services. These features include: • Call Waiting • Three Way Calling (conference) • Call Transfer • Call Forwarding 9.1 Getting Started 9.1.1 Things
  • ZyXEL P-128MH | User Guide - Page 124
    Prestige 128IMH ISDN Modem/ Router/Hub 9.2 Setting Up Supplemental Phone Service All Supplemental Phone Services are enabled by timing is much more precise. With manually tapping, if the duration is too long, it may be interpreted as hanging up by the Prestige. 9.4 Call Waiting ISDN Call Waiting
  • ZyXEL P-128MH | User Guide - Page 125
    Prestige 128IMH ISDN Modem/ Router/Hub After hearing a Call Waiting indicator tone, way calling The Three Way Call feature allows you to add a third party to an existing call. This service must be subscribed from your telephone company. 9.5.1 How To Use Three Way Calling If you wish to call someone
  • ZyXEL P-128MH | User Guide - Page 126
    Prestige 128IMH ISDN Modem/ Router/Hub If you hang up your telephone during a together. 9.6 Call Transfer Call Transfer allows you to transfer an active call to a third party. This service must be subscribed from your telephone company. 9.6.1 How To Use Call Transfer Transferring an active call to a
  • ZyXEL P-128MH | User Guide - Page 127
    Prestige 128IMH ISDN Modem/ Router/Hub 9.7 Call Forwarding Call forwarding means the switch will ring another number at a place where you will be Deactivate CFU Deactivate CFNR Either method should work fine, and you can use whichever one you are most comfortable with. Advanced Phone Services 9-5
  • ZyXEL P-128MH | User Guide - Page 128
  • ZyXEL P-128MH | User Guide - Page 129
    Prestige 128IMH ISDN Modem/ Router/Hub Chapter 10 Filter Configuration 10.1 About Filtering Your Prestige uses filters to decide user-defined call filters. Your Prestige has built-in call filters that prevent administrative, e.g., RIP and SAP (Service Advertising Protocol), packets from triggering
  • ZyXEL P-128MH | User Guide - Page 130
    Prestige 128IMH ISDN Modem/ Router/Hub Outgoing Packet Data Filters No match Match related rules, e.g., all the rules for NetBIOS, into a single set and give it a descriptive name. The Prestige allows you to configure up to twelve filter sets with six rules in each set, for a total of 72 filter
  • ZyXEL P-128MH | User Guide - Page 131
    Prestige 128IMH ISDN Modem/ Router/Hub 10.2 Configuring a Filter Set To configure a filter sets, follow the procedure below: Step 1. Select option 21. Filter Set Configuration from the
  • ZyXEL P-128MH | User Guide - Page 132
    Prestige 128IMH ISDN Modem/ Router/Hub Menu 21.1 - Filter Rules Summary # A Type Filter Rules M m n 1 N 2 N 3 N 4 N 5 N 6 N Enter Filter Rule Number (1 -6) to Configure: Figure 10-3 Menu 21.1 - Filter Rules Summary
  • ZyXEL P-128MH | User Guide - Page 133
    Prestige 128IMH ISDN Modem/ Router/Hub Table 10-2 Abbreviations Used in the Filter Rules Summary Menu (continued) Abbreviations Filter Rules M Description The filter rule parameters will be
  • ZyXEL P-128MH | User Guide - Page 134
    Prestige 128IMH ISDN Modem/ Router/Hub l If the filter type is IPX, the following abbreviations listed in the following table will be used. Table 10-4 Abbreviations Used
  • ZyXEL P-128MH | User Guide - Page 135
    Prestige 128IMH ISDN Modem/ Router/Hub 10.3 Configuring a Filter Rule To configure a filter device filter sets. If you include a protocol filter set in a device filters field or vice versa, the Prestige will warn you and will not allow you to save. 10.3.1 TCP/IP Filter Rule This section shows you
  • ZyXEL P-128MH | User Guide - Page 136
    Prestige 128IMH ISDN Modem/ Router/Hub Menu 21.1.1 - TCP/IP Filter Rule Filter #: 1,1 Filter Type= TCP/IP Filter Rule Active= No IP Protocol= 0 IP Source Route= No
  • ZyXEL P-128MH | User Guide - Page 137
    Prestige 128IMH ISDN Modem/ Router/Hub The following table describes how to configure your TCP/IP filter rule. Field Active IP Protocol IP Source Route Destination: IP
  • ZyXEL P-128MH | User Guide - Page 138
    Prestige 128IMH ISDN Modem/ Router/Hub Field Description according the action fields. Option If More is Yes, then Action Matched and Action Not Matched will be N/A. Log
  • ZyXEL P-128MH | User Guide - Page 139
    Prestige 128IMH ISDN Modem/ Router/Hub 10.3.2 Generic Filter Rule This section shows of the packet to check with the Offset (from 0) and the Length fields, both in bytes. The Prestige applies the Mask (bit-wise ANDing) to the data portion before comparing the result against the Value to determine
  • ZyXEL P-128MH | User Guide - Page 140
    Prestige 128IMH ISDN Modem/ Router/Hub The table below describes the fields in the Generic Filter Rule Menu. Field Table 10-7 Generic Filter Rule Menu Fields Description
  • ZyXEL P-128MH | User Guide - Page 141
    Prestige 128IMH ISDN Modem/ Router/Hub 10.4 Novell IPX Filter Rule This section shows you how to configure an IPX filter rule. IPX filters allow you to
  • ZyXEL P-128MH | User Guide - Page 142
    Prestige 128IMH ISDN Modem/ Router/Hub The table below describes the IPX Filter Rule. Field Table 10-8 IPX Filter Rule Menu Fields Description IPX Packet Type Destination/
  • ZyXEL P-128MH | User Guide - Page 143
    Prestige 128IMH ISDN Modem/ Router/Hub Chapter 11 SNMP Configuration 11.1 About SNMP SNMP (Simple Network Management Protocol) is a protocol for network management and monitoring. Your Prestige supports SNMP agent functionality, which allows a manager station to manage and monitor the Prestige
  • ZyXEL P-128MH | User Guide - Page 144
    Prestige 128IMH ISDN Modem/ Router/Hub The following table describes the SNMP configuration parameters. Field from the management station. public Trusted Host If you enter a trusted host, your Prestige will only respond to SNMP messages from this address. If you leave the field blank (default),
  • ZyXEL P-128MH | User Guide - Page 145
    Prestige 128IMH ISDN Modem/ Router/Hub Chapter 12 System Security This chapter covers Menu 23, which is for you to change the system password and to configure
  • ZyXEL P-128MH | User Guide - Page 146
    Prestige 128IMH ISDN Modem/ Router/Hub Step 2. From the System Security Menu, select option Change Password to open Menu 23.1 - System Security - Change Password. Step 3. Enter your
  • ZyXEL P-128MH | User Guide - Page 147
    is limited due to memory constraints. If you have more users than what the Prestige can store locally, use an external RADIUS (Remote Authentication Dial-In User Service) server that provides authentication service for unlimited number of users. 12.2.1 Installing a RADIUS Server To use RADIUS
  • ZyXEL P-128MH | User Guide - Page 148
    Prestige 128IMH ISDN Modem/ Router/Hub 12-4 System Security
  • ZyXEL P-128MH | User Guide - Page 149
    Prestige 128IMH ISDN Modem/ Router/Hub 12.2.2 RADIUS Server Configuration To configure the RADIUS server, select option 23, System Security, from the Main Menu to open Menu
  • ZyXEL P-128MH | User Guide - Page 150
    Prestige 128IMH ISDN Modem/ Router/Hub The fields in the System Security - External Server supported. The IP address of the RADIUS server. Default The IP port number used by the authentication server. The default is port 1645. A "password" used to authenticate your Prestige to the RADIUS service.
  • ZyXEL P-128MH | User Guide - Page 151
    Prestige 128IMH ISDN Modem/ Router/Hub 12.2.5 Using RADIUS Authentication for CLID To use RADIUS for CLID authentication, create a user record in the users file where the user name (the first field) is the telephone number, and the password (the second field) is always Zyxel-CLID (case-sensitive).
  • ZyXEL P-128MH | User Guide - Page 152
  • ZyXEL P-128MH | User Guide - Page 153
    Prestige 128IMH ISDN Modem/ Router/Hub Chapter 13 Telnet Configuration and Capabilities 13.1 About Telnet Configuration Before the Prestige is properly setup for TCP/IP, the only option for configuring it is through the console port. Once your Prestige is configured, you can use telnet to configure
  • ZyXEL P-128MH | User Guide - Page 154
    Prestige 128IMH ISDN Modem/ Router/Hub 13.2 Telnet Under SUA When Single User Account (SUA) is enabled and an inside server is specified, telnet connections from the outside will be forwarded to the inside server. So to configure the Prestige via telnet from the outside, you must first telnet to the
  • ZyXEL P-128MH | User Guide - Page 155
    Prestige 128IMH ISDN Modem/ Router/Hub Chapter 14 System Maintenance This chapter covers the diagnostic tools that help you to maintain your Prestige. These tools include updates on system status, port status, log and trace capabilities and upgrades for the system software. This chapter describes
  • ZyXEL P-128MH | User Guide - Page 156
    Prestige 128IMH ISDN Modem/ Router/Hub 14.1 System Status The first selection, System Status, gives you information on the version of your system firmware and the status and statistics of the ports, as shown in below. System Status is a tool that can be used to monitor your Prestige. Specifically,
  • ZyXEL P-128MH | User Guide - Page 157
    Prestige 128IMH ISDN Modem/ Router/Hub Table 14-1 System Maintenance - Status Menu Fields Field Description Chan Link Shows statistics for B1 and B2 channels respectively. This is
  • ZyXEL P-128MH | User Guide - Page 158
    Prestige 128IMH ISDN Modem/ Router/Hub WAN CHAN 1 IP Addr Refers to the IP address of the Prestige on Channel 1. CHAN 2 IP Addr Refers to the IP address of the Prestige on Channel 2. Port 1 CLID Shows the Caller ID of the peer on Port 1. Port 2 CLID Shows the Caller ID of the peer on Port
  • ZyXEL P-128MH | User Guide - Page 159
    14.1.1 System Information Prestige 128IMH ISDN Modem/ Router/Hub Menu 24.2.1 - System Maintenance - Information Name: Routing: IP RAS S/W Version: V2.21B01 | 11/6/98 ISDN F/W Version: V 099 Country Code: 238 LAN
  • ZyXEL P-128MH | User Guide - Page 160
    Prestige 128IMH ISDN Modem/ Router/Hub Table 14-2 Fields in System Maintenance Field Description Name displays the system name of your Prestige for the console port through Menu 24.2.2 - Console Port Speed. Your Prestige supports 9600 (default), 19200, 38400, 57600, and 115200bps for the console
  • ZyXEL P-128MH | User Guide - Page 161
    Prestige 128IMH ISDN Modem/ Router/Hub Menu 24.2.2 - System Maintenance - Change Console System Maintenance - Change Console Port Speed 14.2 Log and Trace There are two logging facilities in the Prestige. The first is the error logs and trace records that are stored locally. The second is the UNIX
  • ZyXEL P-128MH | User Guide - Page 162
    Prestige 128IMH ISDN Modem/ Router/Hub Examples of typical error and information messages are presented in the figure below. 60 4 PP07 INFO LAN promiscuous mode 61 4 PINI
  • ZyXEL P-128MH | User Guide - Page 163
    Prestige 128IMH ISDN Modem/ Router/Hub 14.2.2 Syslog And Accounting The Prestige uses the UNIX syslog facility to log the in different files in the server. Please refer to your UNIX manual for more detail. Your Prestige sends three types of syslog messages: call information messages (i.e. CDR),
  • ZyXEL P-128MH | User Guide - Page 164
    Prestige 128IMH ISDN Modem/ Router/Hub 1. Call Information Messages: line 1 channel 1, call 41, C01, Incoming Call, 40001 line 1 channel 1, call 41, C01, ANSWER Connected, 49K 40001 line 1
  • ZyXEL P-128MH | User Guide - Page 165
    Prestige 128IMH ISDN Modem/ Router/Hub 14.3 Diagnostic The diagnostic facility allows you to test the different aspects of your Prestige to Internet Setup Test 12. Ping Host Enter Menu Selection Number: Select WAN Port= Manual Call Remote Node= N/A Host IP Address= N/A Figure 14-8 Menu 24.4 -
  • ZyXEL P-128MH | User Guide - Page 166
    Prestige 128IMH ISDN Modem/ Router/Hub The following table describes the diagnostic tests available in Menu 24.4 for your Prestige and the configuration has been done correctly. When this option is chosen, the Prestige places a manual call to the ISP remote node. If everything is working properly,
  • ZyXEL P-128MH | User Guide - Page 167
    Prestige 128IMH ISDN Modem/ Router/Hub The following figure shows an example of a successful connection after selecting option Manual Call in Menu 24.4. Start dialing for node ### Hit any key to continue. ### Dialing chan phone:12345 Call CONNECT speed chan prot
  • ZyXEL P-128MH | User Guide - Page 168
    Prestige 128IMH ISDN Modem/ Router/Hub 14.4 Backup Configuration Option 5 from Menu 24 - System Maintenance allows you to backup the current Prestige configuration to your workstation. Backup is highly recommended once your Prestige is functioning properly. You must perform the backup and restore
  • ZyXEL P-128MH | User Guide - Page 169
    Prestige 128IMH ISDN Modem/ Router/Hub below. Figure 14-11 Menu 24.7 - System Maintenance - Upload Firmware 14.6.1 Upload Router Firmware The firmware is the program that controls the functions of the Prestige. Menu 24.7.1 shows you the instructions for uploading the firmware. If you answer yes
  • ZyXEL P-128MH | User Guide - Page 170
    Prestige 128IMH ISDN Modem/ Router/Hub 14.6.2 Uploading Router Configuration File The configuration everything contained within. Menu 24.7.2 shows you the instructions for uploading the configuration file. If you answer yes to the prompt, the Prestige will go into debug mode. Follow the procedure
  • ZyXEL P-128MH | User Guide - Page 171
    Prestige 128IMH port connection, the Prestige supports the up/downloading problem. To use TFTP, your workstatio n must have both telnet and TFTP clients. To transfer the firmware and the configuration file, follow the procedure below: Step 1. Use telnet from your workstation to connect to the Prestige
  • ZyXEL P-128MH | User Guide - Page 172
    Prestige 128IMH ISDN Modem/ Router/Hub Step 2. Put the SMT in command interpreter (CI) for the configuration file, "rom-0" (romzero, not capital o). If you upload the firmware to the Prestige, it will reboot automatically when the file transfer is completed. Note that the telnet connection must be
  • ZyXEL P-128MH | User Guide - Page 173
    Prestige 128IMH ISDN Modem/ Router/Hub ======= Debug Command Listing ======= ATHE print help ATGO boot system ATUR upload RAS code ATUR3 upload RAS configuration file ATBAx change baud
  • ZyXEL P-128MH | User Guide - Page 174
    exit device ether isdn radius ip ppp bridge ipx Web site or send e-mail to the ZyXEL Support Group. Figure 14-15 Command mode 14.8 Call Control The Prestige provides four call control functions: call control parameters, blacklist, budget management andcall history.. Call control parameters
  • ZyXEL P-128MH | User Guide - Page 175
    Prestige 128IMH ISDN Modem/ Router/Hub (configurable in Menu 24.9.1), then the phone number is put in the blacklist. You will have to enable the number manually before the Prestige will dial that number again. Call history chronicles preceding incoming and outgoing calls. To enter the call control
  • ZyXEL P-128MH | User Guide - Page 176
    Prestige 128IMH ISDN Modem/ Router/Hub Table 14-5 Call Control Parameters Fields Field Description Dialer Timeout: The Prestige will .8.2 Blacklist The phone numbers on the bla cklist are numbers that the Prestige had problems connecting in the past. The only operation allowed is for you to
  • ZyXEL P-128MH | User Guide - Page 177
    Prestige 128IMH ISDN Modem/ Router/Hub Figure 14-18 Menu 24.9.2 - Blacklist System Maintenance 14-23
  • ZyXEL P-128MH | User Guide - Page 178
    Prestige 128IMH ISDN Modem/ Router/Hub 14.8.3 Budget Management Menu 24.9.3 shows the budget management statistics for outgoing calls. Remote Node 1. isp1 2. -------3. -------4. -------5. -------6. -------7. -------8. -------9. -------10. -------11. -------12. -------13. Dial-
  • ZyXEL P-128MH | User Guide - Page 179
    Prestige 128IMH ISDN Modem/ Router/Hub Menu 24.9.4 - Call History Phone Number Dir Rate #call Max Min Total 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Enter Entry to Delete(0 to exit): Figure 14-
  • ZyXEL P-128MH | User Guide - Page 180
    Prestige 128IMH ISDN Modem/ Router/Hub #call This is the number of calls made to or received from that telephone number. Max This is the length of
  • ZyXEL P-128MH | User Guide - Page 181
    Prestige 128IMH ISDN Modem/ Router/Hub Chapter 15 Troubleshooting This chapter covers the potential problems you may run into and the possible remedies. After each problem description, some instructions are provided to help you to diagnose and to solve the problem. 15.1 Problems Starting Up the
  • ZyXEL P-128MH | User Guide - Page 182
    Prestige 128IMH ISDN Modem/ Router/Hub 15.2 Problems With the ISDN Line Problem Table 15-2 Troubleshooting the ISDN Line Corrective Action The ISDN initialization failed. This problem occurs when you attempt to save the parameters entered in menu 2, but receive the message, 'Save successful, but
  • ZyXEL P-128MH | User Guide - Page 183
    Prestige 128IMH ISDN Modem/ Router/Hub 15.3 Problems with the LAN Interface Problem Table 15-3 Troubleshooting the LAN Interface Corrective Action Can't ping any station on the LAN Check the Ethernet LEDs on the front panel. The LED should be on
  • ZyXEL P-128MH | User Guide - Page 184
    Prestige 128IMH ISDN Modem/ Router/Hub If the remote dial-in user is negotiating IPX, verify that the IPX network number is valid from the IPX pool (if it is being used). 15-4 Troubleshooting
  • ZyXEL P-128MH | User Guide - Page 185
    Prestige 128IMH ISDN Modem/ Router/Hub ISDN Information Worksheet System Name Protocol Routing q DOVBS 2nd Phone Number 2nd SPID Number Analog Call q Phone1 q Phone2 q DOVBS Supplemental Service Activation Keys (defaults for North America) Conference Call q default: '60' q other: Call
  • ZyXEL P-128MH | User Guide - Page 186
    Prestige 128IMH ISDN Modem/ Router/Hub Subaddress Outside Line Prefix PABX # (S/T bus) Incoming Number Matching Analog Call Routing Global Analog Call q MSN q A/B #1 q Accept q CDSA q Don't Care q A/B #2 q Ignore q
  • ZyXEL P-128MH | User Guide - Page 187
    Prestige 128IMH ISDN Modem/ Router/Hub BAP/BACP BOD CDR CHAP CLID CSU/DSU DCE DHCP DNS Call Detail Record Challenge Handshake Authentication Protocol Calling Line IDentification Channel Service Unit/Data Service Unit Data Communications Equipment Dynamic Host Configuration Protocol Domain Name
  • ZyXEL P-128MH | User Guide - Page 188
    Prestige 128IMH ISDN Modem/ Router/Hub PSTN RADIUS RIP SAP SNAP SNMP SUA TA TFTP TCP UDP UTP WAN Public Switched Telephone Network Remote Authentication Dial-In User Service Routing Infor mation Protocol (IPX) Service Advertising Protocol Sub-Network Access Protocol Simple Network Management
  • ZyXEL P-128MH | User Guide - Page 189
    static route, 7-15 bridging, 4-4, 7-11 BTR. See Base Transmission Rate budget, 8-6, 14-23 call control, 14-20 call direction, 4-2 Index Prestige 128IMH ISDN Modem/ Router/Hub Index callback, 4-3, 8-6, 8-10, 8-11 CHAP, 4-4 CLID, 4-3, 8-5, 8-11 community, 11-19 console port, 2-10 contact person, 2-17
  • ZyXEL P-128MH | User Guide - Page 190
    Prestige 128IMH ISDN Modem/ Router/Hub frame type, 6-1, 6-5 gateway, 5-7, 6-10, 7-16 General Setup, 2-16 generic filter rule, 10-15 hop count, 6-10 IANA, 3-2 idle timeout, 4-5 Internet access, 1-4, 3-1
  • ZyXEL P-128MH | User Guide - Page 191
    SNMP, 11-19 socket, 6-10 software update, 14-15 SUA, 1-5, 3-10, 5-4 Prestige 128IMH ISDN Modem/ Router/Hub subnet mask, 3-2, 3-6, 5-4, 5-7 switch types, xxi, 15- telnet, 13-1 tick count, 6-8, 6-10 trace, 14-7 troubleshooting, 15-25 UTP, 2-9 VT100, 2-10 WAN address , 5-4 watchdog, 6-8 worksheet, xx,
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
Prestige 128IMH
User's Guide
Version 1.0
ZyXEL
T
OTAL
I
NTERNET
A
CCESS
S
OLUTION